Re: [PATCH 03/24] arm64: dts: qcom: Introduce Glymur base dtsi and CRD dts

[Marc Zyngier <maz@kernel.org>]

On Thu, 25 Sep 2025 07:32:11 +0100,
Pankaj Patil <pankaj.patil@oss.qualcomm.com> wrote:
> 
> Introduce initial device tree support for Glymur - Qualcomm's
> next-generation compute SoC and it's associated Compute Reference
> Device (CRD) platform.
> 
> The dt describes CPUs, CPU map, GCC and RPMHCC clock controllers,
> geni UART, interrupt controller, TLMM, reserved memory,
> interconnects, SMMU, firmware scm, watchdog, apps rsc, RPMHPD,
> SRAM, PSCI and pmu nodes.
> 
> Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile       |    1 +
>  arch/arm64/boot/dts/qcom/glymur-crd.dts |   25 +
>  arch/arm64/boot/dts/qcom/glymur.dtsi    | 1320 +++++++++++++++++++++++++++++++
>  3 files changed, 1346 insertions(+)
>

[...]

> +		intc: interrupt-controller@17000000 {
> +			compatible = "arm,gic-v3";
> +			reg = <0x0 0x17000000 0x0 0x10000>,
> +			      <0x0 0x17080000 0x0 0x480000>;
> +
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			#interrupt-cells = <3>;
> +			interrupt-controller;
> +
> +			#redistributor-regions = <1>;
> +			redistributor-stride = <0x0 0x40000>;

Drop these two properties. I assume that your GIC implementation is
compliant with the architecture, and doesn't need hand-holding.

> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +
> +			gic_its: gic-its@17040000 {
> +				compatible = "arm,gic-v3-its";
> +				reg = <0x0 0x17040000 0x0 0x40000>;
> +
> +				msi-controller;
> +				#msi-cells = <1>;
> +			};
> +		};

[...]

> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;

You are missing at one interrupt here, as the CPUs have both secure
security state and FEAT_VHE (hint: the EL2 virtual timer also has an
interrupt, usually on PPI 12).

	M.

-- 
Without deviation from the norm, progress is not possible.