Re: mthca and LinuxBIOS

[yhlu <yhlu.kernel@gmail.com>]

in drivers/pci/setup-res.c: pci_update_resource()

why????
                new = 0; /* currently everyone zeros the high address */

        if ((new & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
            (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64)) {
                new = 0; /* currently everyone zeros the high address */
                pci_write_config_dword(dev, reg + 4, new);
                pci_read_config_dword(dev, reg + 4, &check);
                if (check != new) {
                        printk(KERN_ERR "PCI: Error updating region "
                               "%s/%d (high %08x != %08x)\n",
                               pci_name(dev), resno, new, check);
                }
        }


On 8/5/05, yhlu <yhlu.kernel@gmail.com> wrote:
> pci_restore_bars cause that.
> it didn't restore that according to if resource is 64 bit or not. So
> it overwirte upper 32 bit with 0.
> 
> YH
> 
> file:1b34fc56067ed8ae0ba9b32f46679e13068bb86c ->
> file:65ea7d25f6911d7396e19afbf4bb2738906376f7
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -222,6 +222,37 @@ pci_find_parent_resource(const struct pc
> }
> /**
> + * pci_restore_bars - restore a devices BAR values (e.g. after wake-up)
> + * @dev: PCI device to have its BARs restored
> + *
> + * Restore the BAR values for a given device, so as to make it
> + * accessible by its driver.
> + */
> +void
> +pci_restore_bars(struct pci_dev *dev)
> +{
> + int i, numres;
> +
> + switch (dev->hdr_type) {
> + case PCI_HEADER_TYPE_NORMAL:
> + numres = 6;
> + break;
> + case PCI_HEADER_TYPE_BRIDGE:
> + numres = 2;
> + break;
> + case PCI_HEADER_TYPE_CARDBUS:
> + numres = 1;
> + break;
> + default:
> + /* Should never get here, but just in case... */
> + return;
> + }
> +
> + for (i = 0; i < numres; i ++)
> + pci_update_resource(dev, &dev->resource[i], i);
> +}
> +
> +/**
> 
> On 8/5/05, yhlu <yhlu.kernel@gmail.com> wrote:
> > before I do the cg-update this morning, it didn't mask out the upper 8 bit.
> >
> > YH
> >
> > On 8/5/05, Roland Dreier <rolandd@cisco.com> wrote:
> > >     yhlu> ps.  some kernel pci code patch broke sth yesterday night.
> > >     yhlu> it mask out bit [32-39]
> > >
> > > Is it possible that all your problems are coming from the PCI setup
> > > code incorrectly assigning BARs?
> > >
> > >  - R.
> > >
> >
>