From: "Yinghai Lu" <yhlu.kernel@gmail.com>
To: Ingo Molnar <mingo@elte.hu>,
James Bottomley <James.Bottomley@hansenpartnership.com>,
Mark Salyzyn <mark_salyzyn@adaptec.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux-Scsi <linux-scsi@vger.kernel.org>
Subject: rdac and aac
Date: Wed, 16 Jul 2008 10:51:56 -0700 [thread overview]
Message-ID: <86802c440807161051r7632c1d3qeb73c3cc1a124ed6@mail.gmail.com> (raw)
calling aac_init+0x0/0x9a
Adaptec aacraid driver 1.1-5[2456]-ms
vendor=10de device=005d
ACPI: PCI Interrupt 0000:86:00.0[A] -> Link [LN2C] -> GSI 42 (level,
low) -> IRQ 42
PCI: Setting latency timer of device 0000:86:00.0 to 64
AAC0: kernel 5.2-0[15535] Oct 11 2007
AAC0: monitor 5.2-0[15535]
AAC0: bios 5.2-0[15535]
AAC0: serial 00721EC0115
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
AAC0: 64 Bit DAC enabled
scsi0 : aacraid
BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
IP: [<ffffffff8051f024>] strncmp+0x1b/0x54
PGD 0
Oops: 0000 [1] SMP
CPU 28
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.26-tip-00047-g69a6a3e-dirty #394
RIP: 0010:[<ffffffff8051f024>] [<ffffffff8051f024>] strncmp+0x1b/0x54
RSP: 0018:ffff883824c579f0 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffffffff80ad2190 RCX: 0000000000000000
RDX: 0000000000000003 RSI: ffffffff80cfe351 RDI: 0000000000000003
RBP: ffff883824c57a00 R08: 0000000000000000 R09: ffffe200e0774440
R10: 00000000f6f3ecb9 R11: 00000000f6f3ecb9 R12: ffff88402206c050
R13: ffff88402206c170 R14: 0000000000000000 R15: ffffffffffffffff
FS: 0000000000000000(0000) GS:ffff884024c3b600(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000003 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff883824c56000, task ffff883024c58000)
Stack: ffffffff80e705d0 00000000f6f3ecb9 ffff883824c57a50 ffffffff806ab127
ffffe200e0774440 00000000f6f3ecb9 00000000f6f3ecb9 0000000000000000
00000000ffffffff 0000000000000000 ffff88402206c170 0000000000000001
Call Trace:
[<ffffffff806ab127>] rdac_bus_notify+0x68/0x235
[<ffffffff80a4f7c6>] notifier_call_chain+0x45/0x84
[<ffffffff802835f1>] __blocking_notifier_call_chain+0x61/0x92
[<ffffffff80283649>] blocking_notifier_call_chain+0x27/0x3d
[<ffffffff805b5f36>] device_add+0xf5/0x4fd
[<ffffffff80682811>] ? scsi_setup_command_freelist+0x6c/0xc6
[<ffffffff80683477>] scsi_add_host+0xc5/0x20f
[<ffffffff80a28269>] aac_probe_one+0x3ef/0x4ba
[<ffffffff8053014e>] pci_device_probe+0xd5/0x142
[<ffffffff805b8a01>] driver_probe_device+0xd4/0x199
[<ffffffff802830da>] ? down+0x4b/0x68
[<ffffffff805b8b29>] __driver_attach+0x63/0xa4
[<ffffffff805b8ac6>] ? __driver_attach+0x0/0xa4
[<ffffffff805b8009>] bus_for_each_dev+0x63/0xb1
[<ffffffff805b87cb>] driver_attach+0x34/0x4a
[<ffffffff805b7779>] bus_add_driver+0xcb/0x22b
[<ffffffff8051ae5a>] ? kset_find_obj+0x4c/0x96
[<ffffffff805b8e4e>] driver_register+0xbc/0x153
[<ffffffff802313bd>] ? read_tsc+0x9/0x1c
[<ffffffff8053046f>] __pci_register_driver+0x67/0xb8
[<ffffffff80f71e34>] ? aac_init+0x0/0x9a
[<ffffffff80f71e7f>] aac_init+0x4b/0x9a
[<ffffffff80f409e4>] kernel_init+0x1de/0x346
[<ffffffff8022a4f4>] ? mcount_call+0x5/0x31
[<ffffffff80262df7>] ? finish_task_switch+0x14/0xe3
[<ffffffff8022b589>] child_rip+0xa/0x11
[<ffffffff80f40806>] ? kernel_init+0x0/0x346
[<ffffffff8022b57f>] ? child_rip+0x0/0x11
Code: 28 00 00 00 0f be c0 74 05 e8 0e 74 d4 ff c9 c3 55 31 c9 48 89
e5 48 83 ec 10 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 eb 19 <44>
8a 04 0f 44 88 c0 2a 04 0e 84 c0 75 12 48 ff c1 45 84 c0 74
RIP [<ffffffff8051f024>] strncmp+0x1b/0x54
RSP <ffff883824c579f0>
CR2: 0000000000000003
---[ end trace c89c20984b386ade ]---
next reply other threads:[~2008-07-16 17:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-16 17:51 Yinghai Lu [this message]
2008-07-16 18:17 ` rdac and aac James Bottomley
2008-07-16 18:46 ` Chandra Seetharaman
2008-07-16 19:52 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86802c440807161051r7632c1d3qeb73c3cc1a124ed6@mail.gmail.com \
--to=yhlu.kernel@gmail.com \
--cc=James.Bottomley@hansenpartnership.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=mark_salyzyn@adaptec.com \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.