From: "theelectricengineer@gmail.com" <theelectricengineer@gmail.com>
To: "philip@turmel.org" <philip@turmel.org>
Cc: "linux-raid@vger.kernel.org" <linux-raid@vger.kernel.org>,
"antlists@youngman.org.uk" <antlists@youngman.org.uk>,
"george.rapp@gmail.com" <george.rapp@gmail.com>
Subject: Re:Please help RAID1 complete fail no superblock
Date: Tue, 22 Nov 2016 20:38:20 +0000 [thread overview]
Message-ID: <869594.583611132-sendEmail@optimum> (raw)
[-- Attachment #1: Type: text/plain, Size: 2841 bytes --]
Hi Yaniv,
>
> { Convention on kernel.org is to reply-to-all, trim quotes, and either
> reply at the bottom or interleaved with the questions. CC list
> repaired. And please don't break threading. }
>
> On 11/22/2016 11:24 AM, theelectricengineer@gmail.com wrote:
>
> >>> One more piece of information that would be helpful is the partition
> >>> tables for each drive:
> >>>
> >>> # fdisk -l /dev/sdb /dev/sdc
>
> Per the warnings in the output, fdisk is not appropriate for your
> drives. You must use gdisk or parted:
>
> gdisk -l /dev/sdb
> gdisk -l /dev/sdc
>
> parted /dev/sdb print
> parted /dev/sdc print
>
> Phil
Thank you for informing me about the conventions,
I'll try to conform to all of them.
(what does trim quotes mean?)
I tried sending these emails through gmail and Thunderbird
but kept getting an automatic reply saying that the emails were blocked,
so I'm sending this via the command line (linux terminal).
I don't know how to avoid breaking the thread this way.
I ran both gdisk and parted, here is the output:
gdisk -l /dev/sdb
GPT fdisk (gdisk) version 0.8.5
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdb: 5860533168 sectors, 2.7 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): 3DE466AD-A3E5-4258-93E8-6DCF186E851D
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 5860533134
Partitions will be aligned on 2048-sector boundaries
Total free space is 2925 sectors (1.4 MiB)
Number Start (sector) End (sector) Size Code Name
1 2048 5860532223 2.7 TiB 0700
gdisk -l /dev/sdc
GPT fdisk (gdisk) version 0.8.5
Partition table scan:
MBR: protective
BSD: not present
APM: not present
GPT: present
Found valid GPT with protective MBR; using GPT.
Disk /dev/sdc: 5860533168 sectors, 2.7 TiB
Logical sector size: 512 bytes
Disk identifier (GUID): 88439314-5789-4E07-B7D5-775D6D5D98C1
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 5860533134
Partitions will be aligned on 2048-sector boundaries
Total free space is 5860533101 sectors (2.7 TiB)
Number Start (sector) End (sector) Size Code Name
parted /dev/sdb print
Model: ATA WDC WD30EZRX-00D (scsi)
Disk /dev/sdb: 3001GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
1 1049kB 3001GB 3001GB ext4
parted /dev/sdc print
Model: ATA WDC WD30EZRX-00D (scsi)
Disk /dev/sdc: 3001GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Number Start End Size File system Name Flags
(there are no values for sdc in both gdisk and parted, looks bad)
I greatly appreciate your help.
Thank you,
Yaniv
next reply other threads:[~2016-11-22 20:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-22 20:38 theelectricengineer [this message]
2016-11-22 22:01 ` Please help RAID1 complete fail no superblock Phil Turmel
2016-11-22 23:04 ` YK
2016-11-22 23:08 ` YK
2016-11-26 17:45 ` YK
2016-11-26 19:58 ` Phil Turmel
-- strict thread matches above, loose matches on Subject: below --
2016-11-22 16:24 theelectricengineer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=869594.583611132-sendEmail@optimum \
--to=theelectricengineer@gmail.com \
--cc=antlists@youngman.org.uk \
--cc=george.rapp@gmail.com \
--cc=linux-raid@vger.kernel.org \
--cc=philip@turmel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.