From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 21 Jul 2005 09:49:45 +0200 From: Sven Krewitt Message-ID: <86B0924B71F63459F064BA28@domain.hid> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Content-Disposition: inline Subject: [Adeos-main] adeos kernel panic List-Id: General discussion about Adeos List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: adeos-main@gna.org Hi, i am trying to get adeos working with a 2.4.21 kernel for an arm (altera excalibur) processor. I work with the ep9301_hal17_2.4.21-rmk1-epxa.patch as a template. When all adeos code (except the machine-dependent, which I replaced with code for my machine, if needed) was in place, I could compile the kernel without errors. When I boot this kernel, it stops with a kernel panic at the init-process. Can anyone give me a hint, where in the adeos code I have to search for errors and must make any corrections? Or some method to debug the kernel. Thanks in advance, Sven Here are the logs: [...] Adeos 2.4arm-epxa: Root domain Linux registered. Adeos: Pipelining started. [...] Mounted devfs on /dev Freeing init memory: 56K all done. starting init now... Unable to handle kernel paging request at virtual address 6000001c pgd = c1f10000 [6000001c] *pgd=00000000, *pmd = 00000000 Internal error: Oops: 5 CPU: 0 pc : [] lr : [] Not tainted sp : c01e5fa0 ip : c01e5fa0 fp : 00000000 r10: 4000c7fc r9 : 00000000 r8 : 00000000 r7 : 60000010 r6 : 40001394 r5 : bfffff94 r4 : ffffffff r3 : 60000010 r2 : 40001394 r1 : bfffff94 r0 : c01e5fa0 Flags: nZCv IRQs on FIQs on Mode SVC_32 Segment user Control: 317F Table: 01F10000 DAC: 00000015 Process init (pid: 1, stack limit = 0xc01e4380) Stack: (0xc01e5fa0 to 0xc01e6000) 5fa0: 400044cc bfffff94 0000007f 000044cc 00000000 00000000 40000000 bfffff10 5fc0: 00000000 00000000 4000c7fc 00000000 00000004 bffffe20 40000001 40001394 5fe0: 60000010 ffffffff 00000000 c01e5ff8 c0019c4c c001604c 00000000 00000000 Backtrace: no frame pointer Code: eb0015f3 e1a03007 e1a02006 e1a01005 (e597700c) exit code: 11 Kernel panic: Attempted to kill init! Adeos: Current domain=Linux on CPU #0 [stackbase=00000000] Linux[cpuid=0]: priority=100, status=0x0, pending_hi=0x0 -- ** *** ***** ******* *********** ************* ***************** Key:http://pgp.mit.edu:11371/pks/lookup?op=get&search=0xE5DB12F6 Fingerprint: BB5A 8312 1DED E5EB 2558 3CD7 860F E280 E5DB 12F6