All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Zenghui Yu <yuzenghui@huawei.com>
Cc: Oliver Upton <oliver.upton@linux.dev>, <kvmarm@lists.linux.dev>,
	Joey Gouly <joey.gouly@arm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	Ben Horgan <ben.horgan@arm.com>
Subject: Re: [PATCH v2 6/6] KVM: arm64: vgic-v3: Indicate vgic_put_irq() may take LPI xarray lock
Date: Wed, 05 Nov 2025 10:28:04 +0000	[thread overview]
Message-ID: <86cy5wvknf.wl-maz@kernel.org> (raw)
In-Reply-To: <b4d7cb0f-f007-0b81-46d1-998b15cc14bc@huawei.com>

On Wed, 05 Nov 2025 09:37:10 +0000,
Zenghui Yu <yuzenghui@huawei.com> wrote:
> 
> Hi Oliver,
> 
> On 2025/9/5 18:05, Oliver Upton wrote:
> > The release path on LPIs is quite rare, meaning it can be difficult to
> > find lock ordering bugs on the LPI xarray's spinlock. Tell lockdep that
> > vgic_put_irq() might acquire the xa_lock to make unsafe patterns more
> > obvious.
> > 
> > Reviewed-by: Marc Zyngier <maz@kernel.org>
> > Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
> > ---
> >  arch/arm64/kvm/vgic/vgic.c | 3 +++
> >  1 file changed, 3 insertions(+)
> > 
> > diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c
> > index a21b482844ce..3b247041a130 100644
> > --- a/arch/arm64/kvm/vgic/vgic.c
> > +++ b/arch/arm64/kvm/vgic/vgic.c
> > @@ -142,6 +142,9 @@ void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq)
> >  {
> >  	struct vgic_dist *dist = &kvm->arch.vgic;
> >  
> > +	if (irq->intid >= VGIC_MIN_LPI)
> > +		might_lock(&dist->lpi_xa.xa_lock);
> 
> I got the following splat on a lockdep kernel. The reproducing step can
> be easily inferred from the backtrace (i.e., starting a guest with an
> assigned device).
> 
>  ================================
>  WARNING: inconsistent lock state
>  6.18.0-rc4-00019-g284922f4c563-dirty #2390 Not tainted
>  --------------------------------
>  inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
>  swapper/10/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
>  ffff8000a504de18 (&xa->xa_lock#19){?.+.}-{3:3}, at: vgic_put_irq+0x28/0x110
>  {HARDIRQ-ON-W} state was registered at:
>    lock_acquire+0x1c8/0x354
>    _raw_spin_lock+0x48/0x60
>    vgic_add_lpi.part.0+0x70/0x2f8
>    vgic_its_cmd_handle_mapi.isra.0+0x398/0x418
>    vgic_its_process_commands.part.0+0x4d4/0xfa0
>    vgic_mmio_write_its_cwriter+0x80/0xa4
>    dispatch_mmio_write+0xd0/0x128
>    __kvm_io_bus_write+0xb4/0xe8
>    kvm_io_bus_write+0x58/0x98
>    io_mem_abort+0xe8/0x3f0
>    kvm_handle_guest_abort+0x4d0/0x1414
>    handle_exit+0x6c/0x1c4
>    kvm_arch_vcpu_ioctl_run+0x678/0xbfc
>    kvm_vcpu_ioctl+0x1ac/0xb24
>    __arm64_sys_ioctl+0xac/0x104
>    invoke_syscall+0x48/0x10c
>    el0_svc_common.constprop.0+0x40/0xe0
>    do_el0_svc+0x1c/0x28
>    el0_svc+0x50/0x2c0
>    el0t_64_sync_handler+0xa0/0xe4
>    el0t_64_sync+0x198/0x19c
>  irq event stamp: 5415534
>  hardirqs last  enabled at (5415533): [<ffff8000813e291c>]
> default_idle_call+0x7c/0x138
>  hardirqs last disabled at (5415534): [<ffff8000813dabf4>]
> enter_from_kernel_mode+0x10/0x3c
>  softirqs last  enabled at (5415516): [<ffff8000800c7b54>]
> handle_softirqs+0x4ac/0x4c4
>  softirqs last disabled at (5415511): [<ffff800080010748>]
> __do_softirq+0x14/0x20
> 
>  other info that might help us debug this:
>   Possible unsafe locking scenario:
> 
>         CPU0
>         ----
>    lock(&xa->xa_lock#19);
>    <Interrupt>
>      lock(&xa->xa_lock#19);
> 
>   *** DEADLOCK ***
> 
>  2 locks held by swapper/10/0:
>   #0: ffff00280db646a0 (&ctx->wqh#2){-...}-{3:3}, at:
> eventfd_signal_mask+0x38/0xc0
>   #1: ffff8000a504e480 (&kvm->irq_srcu){.?.+}-{0:0}, at:
> irqfd_wakeup+0x88/0x2ac
> 
>  stack backtrace:
>  CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Kdump: loaded Not tainted
> 6.18.0-rc4-00019-g284922f4c563-dirty #2390 PREEMPT
>  Call trace:
>   show_stack+0x18/0x24 (C)
>   dump_stack_lvl+0x90/0xd0
>   dump_stack+0x18/0x24
>   print_usage_bug.part.0+0x29c/0x358
>   mark_lock+0x6c0/0x960
>   __lock_acquire+0xd4c/0x20fc
>   lock_acquire+0x1c8/0x354
>   vgic_put_irq+0x54/0x110
>   vgic_its_inject_cached_translation+0x178/0x25c
>   kvm_arch_set_irq_inatomic+0xac/0x124

Right. This might_lock() is gross, and clearly doesn't do the right
thing outside of direct injection of LPIs.

I think we should drop it, but we should ensure that lpi_xa.xa_lock is
never taken in interrupt context.

Oliver, what do you think?

	M.

-- 
Without deviation from the norm, progress is not possible.

  reply	other threads:[~2025-11-05 10:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-05 10:05 [PATCH v2 0/6] KVM: arm64: vgic-v3: Fix yet another lock ordering turd Oliver Upton
2025-09-05 10:05 ` [PATCH v2 1/6] KVM: arm64: vgic: Drop stale comment on IRQ active state Oliver Upton
2025-09-05 10:05 ` [PATCH v2 2/6] KVM: arm64: vgic-v3: Use bare refcount for VGIC LPIs Oliver Upton
2025-09-05 10:05 ` [PATCH v2 3/6] KVM: arm64: Spin off release helper from vgic_put_irq() Oliver Upton
2025-09-05 10:05 ` [PATCH v2 4/6] KVM: arm64: vgic-v3: Erase LPIs from xarray outside of raw spinlocks Oliver Upton
2025-09-05 10:05 ` [PATCH v2 5/6] KVM: arm64: vgic-v3: Don't require IRQs be disabled for LPI xarray lock Oliver Upton
2025-09-05 10:05 ` [PATCH v2 6/6] KVM: arm64: vgic-v3: Indicate vgic_put_irq() may take " Oliver Upton
2025-11-05  9:37   ` Zenghui Yu
2025-11-05 10:28     ` Marc Zyngier [this message]
2025-11-06  0:46       ` Oliver Upton
2025-11-06  0:58         ` Oliver Upton
2025-11-06  3:34           ` Zenghui Yu
2025-09-06  6:11 ` [PATCH v2 0/6] KVM: arm64: vgic-v3: Fix yet another lock ordering turd Oliver Upton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86cy5wvknf.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=ben.horgan@arm.com \
    --cc=joey.gouly@arm.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=oliver.upton@linux.dev \
    --cc=suzuki.poulose@arm.com \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.