From: Keith Packard <keithp@keithp.com>
To: Matt Fleming <matt@console-pimps.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>,
Linus Torvalds <torvalds@linux-foundation.org>,
linux-kernel@vger.kernel.org, Matthew Garrett <mjg@redhat.com>,
Zhang Rui <rui.zhang@intel.com>,
Huang Ying <huang.ying.caritas@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
Ingo Molnar <mingo@elte.hu>
Subject: Re: [PATCH] Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid"
Date: Mon, 12 Dec 2011 08:35:25 -0800 [thread overview]
Message-ID: <86sjkpiw8i.fsf@sumi.keithp.com> (raw)
In-Reply-To: <1323684083.3669.15.camel@mfleming-mobl1.ger.corp.intel.com>
[-- Attachment #1: Type: text/plain, Size: 96600 bytes --]
On Mon, 12 Dec 2011 10:01:23 +0000, Matt Fleming <matt@console-pimps.org> wrote:
> How about the dmesg from a kernel with this revert applied?
Happy to oblige. Here's the first few seconds (until X starts):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-rc5-00021-g899e4f0 (keithp@sumi) (gcc version 4.6.2 (Debian 4.6.2-5) ) #211 SMP Sun Dec 11 15:53:31 PST 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-rc5-00021-g899e4f0 root=/dev/sda4 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] BIOS-e820: 0000000000090000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 000000008ad36000 (usable)
[ 0.000000] BIOS-e820: 000000008ad36000 - 000000008ad5f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000008ad5f000 - 000000008ad6f000 (usable)
[ 0.000000] BIOS-e820: 000000008ad6f000 - 000000008ad8f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000008ad8f000 - 000000008ae33000 (usable)
[ 0.000000] BIOS-e820: 000000008ae33000 - 000000008ae8f000 (reserved)
[ 0.000000] BIOS-e820: 000000008ae8f000 - 000000008aed2000 (usable)
[ 0.000000] BIOS-e820: 000000008aed2000 - 000000008aeff000 (reserved)
[ 0.000000] BIOS-e820: 000000008aeff000 - 000000008afa2000 (usable)
[ 0.000000] BIOS-e820: 000000008afa2000 - 000000008fa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e00f8000 - 00000000e00f9000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffed0000 - 00000000fff00000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000016fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] EFI v1.10 by Apple
[ 0.000000] ACPI=0x8ad8e000 ACPI 2.0=0x8ad8e014 SMBIOS=0x8ad3d000
[ 0.000000] Kernel-defined memdesc doesn't match the one from EFI!
[ 0.000000] EFI: mem00: type=7, attr=0x80000000000000f, range=[0x0000000000000000-0x000000000008f000) (0MB)
[ 0.000000] EFI: mem01: type=0, attr=0x80000000000000f, range=[0x000000000008f000-0x0000000000090000) (0MB)
[ 0.000000] EFI: mem02: type=7, attr=0x80000000000000f, range=[0x0000000000090000-0x00000000000a0000) (0MB)
[ 0.000000] EFI: mem03: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000443000) (3MB)
[ 0.000000] EFI: mem04: type=7, attr=0xf, range=[0x0000000000443000-0x0000000020000000) (507MB)
[ 0.000000] EFI: mem05: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] EFI: mem06: type=7, attr=0xf, range=[0x0000000020200000-0x0000000040000000) (510MB)
[ 0.000000] EFI: mem07: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB)
[ 0.000000] EFI: mem08: type=7, attr=0xf, range=[0x0000000040200000-0x0000000065b74000) (601MB)
[ 0.000000] EFI: mem09: type=2, attr=0xf, range=[0x0000000065b74000-0x0000000087d1e000) (545MB)
[ 0.000000] EFI: mem10: type=4, attr=0xf, range=[0x0000000087d1e000-0x0000000087d30000) (0MB)
[ 0.000000] EFI: mem11: type=7, attr=0xf, range=[0x0000000087d30000-0x00000000889e0000) (12MB)
[ 0.000000] EFI: mem12: type=1, attr=0xf, range=[0x00000000889e0000-0x0000000088a01000) (0MB)
[ 0.000000] EFI: mem13: type=7, attr=0xf, range=[0x0000000088a01000-0x0000000088a1d000) (0MB)
[ 0.000000] EFI: mem14: type=4, attr=0xf, range=[0x0000000088a1d000-0x0000000088a23000) (0MB)
[ 0.000000] EFI: mem15: type=2, attr=0xf, range=[0x0000000088a23000-0x0000000088a82000) (0MB)
[ 0.000000] EFI: mem16: type=4, attr=0xf, range=[0x0000000088a82000-0x0000000088a85000) (0MB)
[ 0.000000] EFI: mem17: type=2, attr=0xf, range=[0x0000000088a85000-0x0000000088acd000) (0MB)
[ 0.000000] EFI: mem18: type=4, attr=0xf, range=[0x0000000088acd000-0x0000000088ad4000) (0MB)
[ 0.000000] EFI: mem19: type=2, attr=0xf, range=[0x0000000088ad4000-0x0000000088ad6000) (0MB)
[ 0.000000] EFI: mem20: type=4, attr=0xf, range=[0x0000000088ad6000-0x0000000088af3000) (0MB)
[ 0.000000] EFI: mem21: type=1, attr=0xf, range=[0x0000000088af3000-0x0000000088b10000) (0MB)
[ 0.000000] EFI: mem22: type=4, attr=0xf, range=[0x0000000088b10000-0x0000000088b28000) (0MB)
[ 0.000000] EFI: mem23: type=2, attr=0xf, range=[0x0000000088b28000-0x0000000088b2d000) (0MB)
[ 0.000000] EFI: mem24: type=4, attr=0xf, range=[0x0000000088b2d000-0x0000000088b3b000) (0MB)
[ 0.000000] EFI: mem25: type=2, attr=0xf, range=[0x0000000088b3b000-0x0000000088b3c000) (0MB)
[ 0.000000] EFI: mem26: type=4, attr=0xf, range=[0x0000000088b3c000-0x0000000088b3d000) (0MB)
[ 0.000000] EFI: mem27: type=2, attr=0xf, range=[0x0000000088b3d000-0x0000000088b45000) (0MB)
[ 0.000000] EFI: mem28: type=4, attr=0xf, range=[0x0000000088b45000-0x0000000089491000) (9MB)
[ 0.000000] EFI: mem29: type=3, attr=0xf, range=[0x0000000089491000-0x0000000089492000) (0MB)
[ 0.000000] EFI: mem30: type=4, attr=0xf, range=[0x0000000089492000-0x000000008960b000) (1MB)
[ 0.000000] EFI: mem31: type=3, attr=0xf, range=[0x000000008960b000-0x0000000089610000) (0MB)
[ 0.000000] EFI: mem32: type=4, attr=0xf, range=[0x0000000089610000-0x000000008962c000) (0MB)
[ 0.000000] EFI: mem33: type=3, attr=0xf, range=[0x000000008962c000-0x0000000089635000) (0MB)
[ 0.000000] EFI: mem34: type=4, attr=0xf, range=[0x0000000089635000-0x0000000089637000) (0MB)
[ 0.000000] EFI: mem35: type=3, attr=0xf, range=[0x0000000089637000-0x0000000089638000) (0MB)
[ 0.000000] EFI: mem36: type=4, attr=0xf, range=[0x0000000089638000-0x0000000089639000) (0MB)
[ 0.000000] EFI: mem37: type=3, attr=0xf, range=[0x0000000089639000-0x000000008963a000) (0MB)
[ 0.000000] EFI: mem38: type=4, attr=0xf, range=[0x000000008963a000-0x000000008963c000) (0MB)
[ 0.000000] EFI: mem39: type=3, attr=0xf, range=[0x000000008963c000-0x0000000089641000) (0MB)
[ 0.000000] EFI: mem40: type=4, attr=0xf, range=[0x0000000089641000-0x0000000089655000) (0MB)
[ 0.000000] EFI: mem41: type=3, attr=0xf, range=[0x0000000089655000-0x0000000089659000) (0MB)
[ 0.000000] EFI: mem42: type=4, attr=0xf, range=[0x0000000089659000-0x0000000089660000) (0MB)
[ 0.000000] EFI: mem43: type=3, attr=0xf, range=[0x0000000089660000-0x0000000089661000) (0MB)
[ 0.000000] EFI: mem44: type=4, attr=0xf, range=[0x0000000089661000-0x0000000089664000) (0MB)
[ 0.000000] EFI: mem45: type=3, attr=0xf, range=[0x0000000089664000-0x000000008966e000) (0MB)
[ 0.000000] EFI: mem46: type=4, attr=0xf, range=[0x000000008966e000-0x0000000089673000) (0MB)
[ 0.000000] EFI: mem47: type=3, attr=0xf, range=[0x0000000089673000-0x0000000089675000) (0MB)
[ 0.000000] EFI: mem48: type=4, attr=0xf, range=[0x0000000089675000-0x000000008969a000) (0MB)
[ 0.000000] EFI: mem49: type=3, attr=0xf, range=[0x000000008969a000-0x000000008969d000) (0MB)
[ 0.000000] EFI: mem50: type=4, attr=0xf, range=[0x000000008969d000-0x00000000896ad000) (0MB)
[ 0.000000] EFI: mem51: type=3, attr=0xf, range=[0x00000000896ad000-0x00000000896b1000) (0MB)
[ 0.000000] EFI: mem52: type=4, attr=0xf, range=[0x00000000896b1000-0x00000000896d6000) (0MB)
[ 0.000000] EFI: mem53: type=3, attr=0xf, range=[0x00000000896d6000-0x00000000896eb000) (0MB)
[ 0.000000] EFI: mem54: type=4, attr=0xf, range=[0x00000000896eb000-0x00000000896f6000) (0MB)
[ 0.000000] EFI: mem55: type=3, attr=0xf, range=[0x00000000896f6000-0x000000008970b000) (0MB)
[ 0.000000] EFI: mem56: type=4, attr=0xf, range=[0x000000008970b000-0x0000000089710000) (0MB)
[ 0.000000] EFI: mem57: type=3, attr=0xf, range=[0x0000000089710000-0x0000000089719000) (0MB)
[ 0.000000] EFI: mem58: type=4, attr=0xf, range=[0x0000000089719000-0x0000000089726000) (0MB)
[ 0.000000] EFI: mem59: type=3, attr=0xf, range=[0x0000000089726000-0x0000000089739000) (0MB)
[ 0.000000] EFI: mem60: type=4, attr=0xf, range=[0x0000000089739000-0x000000008973a000) (0MB)
[ 0.000000] EFI: mem61: type=3, attr=0xf, range=[0x000000008973a000-0x000000008973c000) (0MB)
[ 0.000000] EFI: mem62: type=4, attr=0xf, range=[0x000000008973c000-0x0000000089742000) (0MB)
[ 0.000000] EFI: mem63: type=3, attr=0xf, range=[0x0000000089742000-0x0000000089743000) (0MB)
[ 0.000000] EFI: mem64: type=4, attr=0xf, range=[0x0000000089743000-0x0000000089744000) (0MB)
[ 0.000000] EFI: mem65: type=3, attr=0xf, range=[0x0000000089744000-0x0000000089748000) (0MB)
[ 0.000000] EFI: mem66: type=4, attr=0xf, range=[0x0000000089748000-0x000000008974a000) (0MB)
[ 0.000000] EFI: mem67: type=3, attr=0xf, range=[0x000000008974a000-0x000000008974b000) (0MB)
[ 0.000000] EFI: mem68: type=4, attr=0xf, range=[0x000000008974b000-0x000000008974f000) (0MB)
[ 0.000000] EFI: mem69: type=3, attr=0xf, range=[0x000000008974f000-0x0000000089752000) (0MB)
[ 0.000000] EFI: mem70: type=4, attr=0xf, range=[0x0000000089752000-0x0000000089753000) (0MB)
[ 0.000000] EFI: mem71: type=3, attr=0xf, range=[0x0000000089753000-0x0000000089754000) (0MB)
[ 0.000000] EFI: mem72: type=4, attr=0xf, range=[0x0000000089754000-0x0000000089755000) (0MB)
[ 0.000000] EFI: mem73: type=3, attr=0xf, range=[0x0000000089755000-0x0000000089759000) (0MB)
[ 0.000000] EFI: mem74: type=4, attr=0xf, range=[0x0000000089759000-0x000000008975c000) (0MB)
[ 0.000000] EFI: mem75: type=3, attr=0xf, range=[0x000000008975c000-0x000000008975d000) (0MB)
[ 0.000000] EFI: mem76: type=4, attr=0xf, range=[0x000000008975d000-0x000000008975f000) (0MB)
[ 0.000000] EFI: mem77: type=3, attr=0xf, range=[0x000000008975f000-0x0000000089761000) (0MB)
[ 0.000000] EFI: mem78: type=4, attr=0xf, range=[0x0000000089761000-0x0000000089765000) (0MB)
[ 0.000000] EFI: mem79: type=3, attr=0xf, range=[0x0000000089765000-0x0000000089769000) (0MB)
[ 0.000000] EFI: mem80: type=4, attr=0xf, range=[0x0000000089769000-0x000000008976a000) (0MB)
[ 0.000000] EFI: mem81: type=3, attr=0xf, range=[0x000000008976a000-0x000000008976b000) (0MB)
[ 0.000000] EFI: mem82: type=4, attr=0xf, range=[0x000000008976b000-0x000000008976e000) (0MB)
[ 0.000000] EFI: mem83: type=3, attr=0xf, range=[0x000000008976e000-0x0000000089775000) (0MB)
[ 0.000000] EFI: mem84: type=4, attr=0xf, range=[0x0000000089775000-0x0000000089776000) (0MB)
[ 0.000000] EFI: mem85: type=3, attr=0xf, range=[0x0000000089776000-0x000000008977b000) (0MB)
[ 0.000000] EFI: mem86: type=4, attr=0xf, range=[0x000000008977b000-0x000000008977f000) (0MB)
[ 0.000000] EFI: mem87: type=3, attr=0xf, range=[0x000000008977f000-0x0000000089780000) (0MB)
[ 0.000000] EFI: mem88: type=4, attr=0xf, range=[0x0000000089780000-0x0000000089781000) (0MB)
[ 0.000000] EFI: mem89: type=3, attr=0xf, range=[0x0000000089781000-0x0000000089786000) (0MB)
[ 0.000000] EFI: mem90: type=4, attr=0xf, range=[0x0000000089786000-0x0000000089788000) (0MB)
[ 0.000000] EFI: mem91: type=3, attr=0xf, range=[0x0000000089788000-0x000000008978a000) (0MB)
[ 0.000000] EFI: mem92: type=4, attr=0xf, range=[0x000000008978a000-0x000000008978b000) (0MB)
[ 0.000000] EFI: mem93: type=3, attr=0xf, range=[0x000000008978b000-0x000000008978f000) (0MB)
[ 0.000000] EFI: mem94: type=4, attr=0xf, range=[0x000000008978f000-0x00000000897a7000) (0MB)
[ 0.000000] EFI: mem95: type=3, attr=0xf, range=[0x00000000897a7000-0x00000000897bb000) (0MB)
[ 0.000000] EFI: mem96: type=4, attr=0xf, range=[0x00000000897bb000-0x00000000897be000) (0MB)
[ 0.000000] EFI: mem97: type=3, attr=0xf, range=[0x00000000897be000-0x00000000897c2000) (0MB)
[ 0.000000] EFI: mem98: type=4, attr=0xf, range=[0x00000000897c2000-0x00000000897c3000) (0MB)
[ 0.000000] EFI: mem99: type=3, attr=0xf, range=[0x00000000897c3000-0x00000000897c5000) (0MB)
[ 0.000000] EFI: mem100: type=4, attr=0xf, range=[0x00000000897c5000-0x00000000897c7000) (0MB)
[ 0.000000] EFI: mem101: type=3, attr=0xf, range=[0x00000000897c7000-0x00000000897c9000) (0MB)
[ 0.000000] EFI: mem102: type=4, attr=0xf, range=[0x00000000897c9000-0x00000000897ca000) (0MB)
[ 0.000000] EFI: mem103: type=3, attr=0xf, range=[0x00000000897ca000-0x00000000897d7000) (0MB)
[ 0.000000] EFI: mem104: type=4, attr=0xf, range=[0x00000000897d7000-0x00000000897d9000) (0MB)
[ 0.000000] EFI: mem105: type=3, attr=0xf, range=[0x00000000897d9000-0x00000000897db000) (0MB)
[ 0.000000] EFI: mem106: type=4, attr=0xf, range=[0x00000000897db000-0x00000000897e3000) (0MB)
[ 0.000000] EFI: mem107: type=3, attr=0xf, range=[0x00000000897e3000-0x00000000897e6000) (0MB)
[ 0.000000] EFI: mem108: type=4, attr=0xf, range=[0x00000000897e6000-0x00000000897e8000) (0MB)
[ 0.000000] EFI: mem109: type=3, attr=0xf, range=[0x00000000897e8000-0x00000000897ea000) (0MB)
[ 0.000000] EFI: mem110: type=4, attr=0xf, range=[0x00000000897ea000-0x00000000897ef000) (0MB)
[ 0.000000] EFI: mem111: type=3, attr=0xf, range=[0x00000000897ef000-0x00000000897f5000) (0MB)
[ 0.000000] EFI: mem112: type=4, attr=0xf, range=[0x00000000897f5000-0x00000000897f7000) (0MB)
[ 0.000000] EFI: mem113: type=3, attr=0xf, range=[0x00000000897f7000-0x00000000897fe000) (0MB)
[ 0.000000] EFI: mem114: type=4, attr=0xf, range=[0x00000000897fe000-0x0000000089800000) (0MB)
[ 0.000000] EFI: mem115: type=3, attr=0xf, range=[0x0000000089800000-0x0000000089806000) (0MB)
[ 0.000000] EFI: mem116: type=4, attr=0xf, range=[0x0000000089806000-0x000000008980a000) (0MB)
[ 0.000000] EFI: mem117: type=3, attr=0xf, range=[0x000000008980a000-0x000000008980b000) (0MB)
[ 0.000000] EFI: mem118: type=4, attr=0xf, range=[0x000000008980b000-0x000000008980c000) (0MB)
[ 0.000000] EFI: mem119: type=3, attr=0xf, range=[0x000000008980c000-0x0000000089813000) (0MB)
[ 0.000000] EFI: mem120: type=4, attr=0xf, range=[0x0000000089813000-0x0000000089815000) (0MB)
[ 0.000000] EFI: mem121: type=3, attr=0xf, range=[0x0000000089815000-0x000000008981b000) (0MB)
[ 0.000000] EFI: mem122: type=4, attr=0xf, range=[0x000000008981b000-0x000000008981f000) (0MB)
[ 0.000000] EFI: mem123: type=3, attr=0xf, range=[0x000000008981f000-0x000000008982e000) (0MB)
[ 0.000000] EFI: mem124: type=4, attr=0xf, range=[0x000000008982e000-0x000000008982f000) (0MB)
[ 0.000000] EFI: mem125: type=3, attr=0xf, range=[0x000000008982f000-0x0000000089848000) (0MB)
[ 0.000000] EFI: mem126: type=4, attr=0xf, range=[0x0000000089848000-0x0000000089849000) (0MB)
[ 0.000000] EFI: mem127: type=3, attr=0xf, range=[0x0000000089849000-0x000000008984f000) (0MB)
[ 0.000000] EFI: mem128: type=4, attr=0xf, range=[0x000000008984f000-0x0000000089853000) (0MB)
[ 0.000000] EFI: mem129: type=3, attr=0xf, range=[0x0000000089853000-0x0000000089859000) (0MB)
[ 0.000000] EFI: mem130: type=4, attr=0xf, range=[0x0000000089859000-0x000000008985a000) (0MB)
[ 0.000000] EFI: mem131: type=3, attr=0xf, range=[0x000000008985a000-0x000000008985b000) (0MB)
[ 0.000000] EFI: mem132: type=4, attr=0xf, range=[0x000000008985b000-0x000000008985f000) (0MB)
[ 0.000000] EFI: mem133: type=3, attr=0xf, range=[0x000000008985f000-0x0000000089860000) (0MB)
[ 0.000000] EFI: mem134: type=4, attr=0xf, range=[0x0000000089860000-0x0000000089865000) (0MB)
[ 0.000000] EFI: mem135: type=3, attr=0xf, range=[0x0000000089865000-0x0000000089867000) (0MB)
[ 0.000000] EFI: mem136: type=4, attr=0xf, range=[0x0000000089867000-0x0000000089869000) (0MB)
[ 0.000000] EFI: mem137: type=3, attr=0xf, range=[0x0000000089869000-0x000000008986a000) (0MB)
[ 0.000000] EFI: mem138: type=4, attr=0xf, range=[0x000000008986a000-0x000000008986d000) (0MB)
[ 0.000000] EFI: mem139: type=3, attr=0xf, range=[0x000000008986d000-0x000000008986e000) (0MB)
[ 0.000000] EFI: mem140: type=4, attr=0xf, range=[0x000000008986e000-0x000000008986f000) (0MB)
[ 0.000000] EFI: mem141: type=3, attr=0xf, range=[0x000000008986f000-0x0000000089871000) (0MB)
[ 0.000000] EFI: mem142: type=4, attr=0xf, range=[0x0000000089871000-0x0000000089873000) (0MB)
[ 0.000000] EFI: mem143: type=3, attr=0xf, range=[0x0000000089873000-0x0000000089875000) (0MB)
[ 0.000000] EFI: mem144: type=4, attr=0xf, range=[0x0000000089875000-0x0000000089877000) (0MB)
[ 0.000000] EFI: mem145: type=3, attr=0xf, range=[0x0000000089877000-0x0000000089880000) (0MB)
[ 0.000000] EFI: mem146: type=4, attr=0xf, range=[0x0000000089880000-0x0000000089881000) (0MB)
[ 0.000000] EFI: mem147: type=3, attr=0xf, range=[0x0000000089881000-0x0000000089883000) (0MB)
[ 0.000000] EFI: mem148: type=4, attr=0xf, range=[0x0000000089883000-0x0000000089884000) (0MB)
[ 0.000000] EFI: mem149: type=3, attr=0xf, range=[0x0000000089884000-0x0000000089885000) (0MB)
[ 0.000000] EFI: mem150: type=4, attr=0xf, range=[0x0000000089885000-0x000000008988a000) (0MB)
[ 0.000000] EFI: mem151: type=3, attr=0xf, range=[0x000000008988a000-0x000000008988b000) (0MB)
[ 0.000000] EFI: mem152: type=4, attr=0xf, range=[0x000000008988b000-0x0000000089890000) (0MB)
[ 0.000000] EFI: mem153: type=3, attr=0xf, range=[0x0000000089890000-0x0000000089891000) (0MB)
[ 0.000000] EFI: mem154: type=4, attr=0xf, range=[0x0000000089891000-0x0000000089892000) (0MB)
[ 0.000000] EFI: mem155: type=3, attr=0xf, range=[0x0000000089892000-0x0000000089899000) (0MB)
[ 0.000000] EFI: mem156: type=4, attr=0xf, range=[0x0000000089899000-0x000000008989e000) (0MB)
[ 0.000000] EFI: mem157: type=3, attr=0xf, range=[0x000000008989e000-0x00000000898a0000) (0MB)
[ 0.000000] EFI: mem158: type=4, attr=0xf, range=[0x00000000898a0000-0x00000000898a6000) (0MB)
[ 0.000000] EFI: mem159: type=3, attr=0xf, range=[0x00000000898a6000-0x00000000898a7000) (0MB)
[ 0.000000] EFI: mem160: type=4, attr=0xf, range=[0x00000000898a7000-0x00000000898a9000) (0MB)
[ 0.000000] EFI: mem161: type=3, attr=0xf, range=[0x00000000898a9000-0x00000000898aa000) (0MB)
[ 0.000000] EFI: mem162: type=4, attr=0xf, range=[0x00000000898aa000-0x00000000898db000) (0MB)
[ 0.000000] EFI: mem163: type=3, attr=0xf, range=[0x00000000898db000-0x00000000898ee000) (0MB)
[ 0.000000] EFI: mem164: type=4, attr=0xf, range=[0x00000000898ee000-0x0000000089934000) (0MB)
[ 0.000000] EFI: mem165: type=3, attr=0xf, range=[0x0000000089934000-0x0000000089948000) (0MB)
[ 0.000000] EFI: mem166: type=4, attr=0xf, range=[0x0000000089948000-0x0000000089949000) (0MB)
[ 0.000000] EFI: mem167: type=3, attr=0xf, range=[0x0000000089949000-0x000000008994c000) (0MB)
[ 0.000000] EFI: mem168: type=4, attr=0xf, range=[0x000000008994c000-0x0000000089968000) (0MB)
[ 0.000000] EFI: mem169: type=3, attr=0xf, range=[0x0000000089968000-0x000000008996d000) (0MB)
[ 0.000000] EFI: mem170: type=4, attr=0xf, range=[0x000000008996d000-0x000000008997a000) (0MB)
[ 0.000000] EFI: mem171: type=3, attr=0xf, range=[0x000000008997a000-0x000000008997b000) (0MB)
[ 0.000000] EFI: mem172: type=4, attr=0xf, range=[0x000000008997b000-0x000000008997c000) (0MB)
[ 0.000000] EFI: mem173: type=3, attr=0xf, range=[0x000000008997c000-0x000000008997d000) (0MB)
[ 0.000000] EFI: mem174: type=4, attr=0xf, range=[0x000000008997d000-0x000000008998f000) (0MB)
[ 0.000000] EFI: mem175: type=3, attr=0xf, range=[0x000000008998f000-0x00000000899a4000) (0MB)
[ 0.000000] EFI: mem176: type=4, attr=0xf, range=[0x00000000899a4000-0x00000000899a5000) (0MB)
[ 0.000000] EFI: mem177: type=3, attr=0xf, range=[0x00000000899a5000-0x00000000899b1000) (0MB)
[ 0.000000] EFI: mem178: type=4, attr=0xf, range=[0x00000000899b1000-0x00000000899b4000) (0MB)
[ 0.000000] EFI: mem179: type=3, attr=0xf, range=[0x00000000899b4000-0x00000000899b8000) (0MB)
[ 0.000000] EFI: mem180: type=4, attr=0xf, range=[0x00000000899b8000-0x0000000089dd9000) (4MB)
[ 0.000000] EFI: mem181: type=3, attr=0xf, range=[0x0000000089dd9000-0x0000000089dde000) (0MB)
[ 0.000000] EFI: mem182: type=4, attr=0xf, range=[0x0000000089dde000-0x0000000089ddf000) (0MB)
[ 0.000000] EFI: mem183: type=3, attr=0xf, range=[0x0000000089ddf000-0x0000000089de1000) (0MB)
[ 0.000000] EFI: mem184: type=4, attr=0xf, range=[0x0000000089de1000-0x0000000089de2000) (0MB)
[ 0.000000] EFI: mem185: type=3, attr=0xf, range=[0x0000000089de2000-0x0000000089de5000) (0MB)
[ 0.000000] EFI: mem186: type=4, attr=0xf, range=[0x0000000089de5000-0x0000000089de6000) (0MB)
[ 0.000000] EFI: mem187: type=3, attr=0xf, range=[0x0000000089de6000-0x0000000089df3000) (0MB)
[ 0.000000] EFI: mem188: type=4, attr=0xf, range=[0x0000000089df3000-0x0000000089df5000) (0MB)
[ 0.000000] EFI: mem189: type=3, attr=0xf, range=[0x0000000089df5000-0x0000000089e02000) (0MB)
[ 0.000000] EFI: mem190: type=4, attr=0xf, range=[0x0000000089e02000-0x0000000089e03000) (0MB)
[ 0.000000] EFI: mem191: type=3, attr=0xf, range=[0x0000000089e03000-0x0000000089e06000) (0MB)
[ 0.000000] EFI: mem192: type=4, attr=0xf, range=[0x0000000089e06000-0x0000000089e07000) (0MB)
[ 0.000000] EFI: mem193: type=3, attr=0xf, range=[0x0000000089e07000-0x0000000089e08000) (0MB)
[ 0.000000] EFI: mem194: type=4, attr=0xf, range=[0x0000000089e08000-0x000000008ad0f000) (15MB)
[ 0.000000] EFI: mem195: type=7, attr=0xf, range=[0x000000008ad0f000-0x000000008ad36000) (0MB)
[ 0.000000] EFI: mem196: type=10, attr=0xf, range=[0x000000008ad36000-0x000000008ad5f000) (0MB)
[ 0.000000] EFI: mem197: type=7, attr=0xf, range=[0x000000008ad5f000-0x000000008ad6f000) (0MB)
[ 0.000000] EFI: mem198: type=9, attr=0xf, range=[0x000000008ad6f000-0x000000008ad8f000) (0MB)
[ 0.000000] EFI: mem199: type=7, attr=0xf, range=[0x000000008ad8f000-0x000000008ae33000) (0MB)
[ 0.000000] EFI: mem200: type=6, attr=0x800000000000000f, range=[0x000000008ae33000-0x000000008ae8f000) (0MB)
[ 0.000000] EFI: mem201: type=7, attr=0xf, range=[0x000000008ae8f000-0x000000008aed2000) (0MB)
[ 0.000000] EFI: mem202: type=5, attr=0x800000000000000f, range=[0x000000008aed2000-0x000000008aeff000) (0MB)
[ 0.000000] EFI: mem203: type=7, attr=0xf, range=[0x000000008aeff000-0x000000008af9a000) (0MB)
[ 0.000000] EFI: mem204: type=2, attr=0xf, range=[0x000000008af9a000-0x000000008afa2000) (0MB)
[ 0.000000] EFI: mem205: type=0, attr=0xf, range=[0x000000008afa2000-0x000000008afff000) (0MB)
[ 0.000000] EFI: mem206: type=6, attr=0x800000000000000f, range=[0x000000008afff000-0x000000008b000000) (0MB)
[ 0.000000] EFI: mem207: type=7, attr=0xf, range=[0x0000000100000000-0x000000016fe00000) (1790MB)
[ 0.000000] EFI: mem208: type=0, attr=0x8000000000000000, range=[0x00000000000a0000-0x0000000000100000) (0MB)
[ 0.000000] EFI: mem209: type=0, attr=0x8000000000000000, range=[0x000000008b000000-0x000000008fa00000) (74MB)
[ 0.000000] EFI: mem210: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] EFI: mem211: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] EFI: mem212: type=11, attr=0x8000000000000000, range=[0x00000000ffed0000-0x00000000fff00000) (0MB)
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Apple Inc. MacBookAir4,1/Mac-C08A6BB70A942AC2, BIOS MBA41.88Z.0077.B00.1106300929 06/30/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x16fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 0A0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 090000000 mask FF0000000 uncachable
[ 0.000000] 3 base 08C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 08B800000 mask FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0x8afa2 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000008afa2000
[ 0.000000] 0000000000 - 008ae00000 page 2M
[ 0.000000] 008ae00000 - 008afa2000 page 4k
[ 0.000000] kernel direct mapping tables up to 8afa2000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000016fe00000
[ 0.000000] 0100000000 - 016fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 16fe00000 @ 8af9b000-8afa2000
[ 0.000000] ACPI: RSDP 000000008ad8e014 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT 000000008ad8e1c0 000A4 (v01 APPLE Apple00 00000060 01000013)
[ 0.000000] ACPI: FACP 000000008ad8c000 000F4 (v04 APPLE Apple00 00000060 Loki 0000005F)
[ 0.000000] ACPI: DSDT 000000008ad81000 05050 (v01 APPLE MacBookA 00040001 INTL 20100915)
[ 0.000000] ACPI: FACS 000000008ad40000 00040
[ 0.000000] ACPI: HPET 000000008ad8b000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC 000000008ad8a000 000BC (v02 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST 000000008ad88000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT 000000008ad87000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT 000000008ad7e000 00107 (v01 APPLE SataAhci 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad7d000 00024 (v01 APPLE SmcDppt 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad7a000 006BE (v01 APPLE UsbNoRmh 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad77000 00159 (v02 APPLE IGHda 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad75000 00032 (v01 APPLE SsdtS3 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad73000 015EB (v02 APPLE SsdtIGPU 00001000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad72000 00569 (v01 PmRef Cpu0Ist 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad71000 009B1 (v01 PmRef CpuPm 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad70000 00315 (v01 PmRef Cpu0Tst 00003000 INTL 20100915)
[ 0.000000] ACPI: SSDT 000000008ad6f000 0037A (v01 PmRef ApTst 00003000 INTL 20100915)
[ 0.000000] ACPI: MCFG 000000008ad89000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000016fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000016fe00000
[ 0.000000] NODE_DATA [000000016fdfb000 - 000000016fdfffff]
[ 0.000000] [ffffea0000000000-ffffea00051fffff] PMD -> [ffff88016b400000-ffff88016edfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0016fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[10] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x0008ad36
[ 0.000000] 0: 0x0008ad5f -> 0x0008ad6f
[ 0.000000] 0: 0x0008ad8f -> 0x0008ae33
[ 0.000000] 0: 0x0008ae8f -> 0x0008aed2
[ 0.000000] 0: 0x0008aeff -> 0x0008afa2
[ 0.000000] 0: 0x00100000 -> 0x0016fe00
[ 0.000000] On node 0 totalpages: 1026143
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 9 pages reserved
[ 0.000000] DMA zone: 3918 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 549640 pages, LIFO batch:31
[ 0.000000] Normal zone: 6265 pages used for memmap
[ 0.000000] Normal zone: 451975 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 000000008ad36000 - 000000008ad5f000
[ 0.000000] PM: Registered nosave memory: 000000008ad6f000 - 000000008ad8f000
[ 0.000000] PM: Registered nosave memory: 000000008ae33000 - 000000008ae8f000
[ 0.000000] PM: Registered nosave memory: 000000008aed2000 - 000000008aeff000
[ 0.000000] PM: Registered nosave memory: 000000008afa2000 - 000000008fa00000
[ 0.000000] PM: Registered nosave memory: 000000008fa00000 - 00000000e00f8000
[ 0.000000] PM: Registered nosave memory: 00000000e00f8000 - 00000000e00f9000
[ 0.000000] PM: Registered nosave memory: 00000000e00f9000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ffed0000
[ 0.000000] PM: Registered nosave memory: 00000000ffed0000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 8fa00000 (gap: 8fa00000:506f8000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88016fa00000 s82112 r8192 d24384 u262144
[ 0.000000] pcpu-alloc: s82112 r8192 d24384 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005533
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-rc5-00021-g899e4f0 root=/dev/sda4 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3932228k/6027264k available (4771k kernel code, 1922692k absent, 172344k reserved, 4027k data, 592k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 1799.985 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3599.97 BogoMIPS (lpj=1799985)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000047] init_memory_mapping: 000000008afff000-000000008b000000
[ 0.000050] 008afff000 - 008b000000 page 4k
[ 0.000227] init_memory_mapping: 000000008b000000-000000008fa00000
[ 0.000229] 008b000000 - 008fa00000 page 2M
[ 0.039269] Security Framework initialized
[ 0.039708] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040859] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.041319] Mount-cache hash table entries: 256
[ 0.041429] Initializing cgroup subsys cpuacct
[ 0.041434] Initializing cgroup subsys memory
[ 0.041444] Initializing cgroup subsys devices
[ 0.041446] Initializing cgroup subsys freezer
[ 0.041447] Initializing cgroup subsys net_cls
[ 0.041449] Initializing cgroup subsys blkio
[ 0.041482] CPU: Physical Processor ID: 0
[ 0.041484] CPU: Processor Core ID: 0
[ 0.041490] mce: CPU supports 7 MCE banks
[ 0.041504] CPU0: Thermal monitoring enabled (TM1)
[ 0.041511] using mwait in idle threads.
[ 0.043090] ACPI: Core revision 20110623
[ 0.051138] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061125] CPU0: Intel(R) Core(TM) i7-2677M CPU @ 1.80GHz stepping 07
[ 0.162482] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.162488] PEBS disabled due to CPU errata.
[ 0.162491] ... version: 3
[ 0.162492] ... bit width: 48
[ 0.162494] ... generic registers: 4
[ 0.162495] ... value mask: 0000ffffffffffff
[ 0.162497] ... max period: 000000007fffffff
[ 0.162498] ... fixed-purpose events: 3
[ 0.162500] ... event mask: 000000070000000f
[ 0.162646] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.162746] Booting Node 0, Processors #1
[ 0.162748] smpboot cpu 1: start_ip = 9a000
[ 0.253474] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.253574] #2
[ 0.253576] smpboot cpu 2: start_ip = 9a000
[ 0.344322] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.344426] #3
[ 0.344428] smpboot cpu 3: start_ip = 9a000
[ 0.435151] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.435180] Brought up 4 CPUs
[ 0.435182] Total of 4 processors activated (14398.34 BogoMIPS).
[ 0.439934] devtmpfs: initialized
[ 0.440868] PM: Registering ACPI NVS region at 8ad36000 (167936 bytes)
[ 0.441025] print_constraints: dummy:
[ 0.441086] NET: Registered protocol family 16
[ 0.441183] ACPI: bus type pci registered
[ 0.441264] PCI: MMCONFIG for domain 0000 [bus 00-97] at [mem 0xe0000000-0xe97fffff] (base 0xe0000000)
[ 0.441268] PCI: not using MMCONFIG
[ 0.441270] PCI: Using configuration type 1 for base access
[ 0.441991] bio: create slab <bio-0> at 0
[ 0.442089] ACPI: Added _OSI(Module Device)
[ 0.442091] ACPI: Added _OSI(Processor Device)
[ 0.442093] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.442096] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.443450] ACPI: EC: EC description table is found, configuring boot EC
[ 0.450776] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.451448] ACPI: SSDT 000000008ad3b190 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 0.451819] ACPI: Dynamic OEM Table Load:
[ 0.451822] ACPI: SSDT (null) 00781 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 0.454358] ACPI: SSDT 000000008ad3c710 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
[ 0.454793] ACPI: Dynamic OEM Table Load:
[ 0.454796] ACPI: SSDT (null) 003A4 (v01 PmRef ApIst 00003000 INTL 20100915)
[ 0.457148] ACPI: SSDT 000000008ad3ad90 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 0.457500] ACPI: Dynamic OEM Table Load:
[ 0.457502] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 0.460695] ACPI: Interpreter enabled
[ 0.460699] ACPI: (supports S0 S3 S4 S5)
[ 0.460724] ACPI: Using IOAPIC for interrupt routing
[ 0.460747] PCI: MMCONFIG for domain 0000 [bus 00-97] at [mem 0xe0000000-0xe97fffff] (base 0xe0000000)
[ 0.463446] PCI: MMCONFIG at [mem 0xe0000000-0xe97fffff] reserved in ACPI motherboard resources
[ 0.525934] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.526127] ACPI: No dock devices found.
[ 0.526129] HEST: Table not found.
[ 0.526132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.526385] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.526726] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.526729] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.526732] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.526734] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.526736] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.526739] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.526741] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 0.526743] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.526746] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.526748] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.526750] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.526753] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.526755] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.526757] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.526759] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.526762] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.526764] pci_root PNP0A08:00: host bridge window [mem 0x8fa00000-0xfeafffff]
[ 0.526767] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.526784] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.526824] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.526857] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.526861] pci 0000:00:01.0: PME# disabled
[ 0.526885] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[ 0.526897] pci 0000:00:02.0: reg 10: [mem 0xa0000000-0xa03fffff 64bit]
[ 0.526905] pci 0000:00:02.0: reg 18: [mem 0x90000000-0x9fffffff 64bit pref]
[ 0.526910] pci 0000:00:02.0: reg 20: [io 0x2000-0x203f]
[ 0.526968] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.526996] pci 0000:00:16.0: reg 10: [mem 0xa0607100-0xa060710f 64bit]
[ 0.527064] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.527069] pci 0000:00:16.0: PME# disabled
[ 0.527105] pci 0000:00:1a.0: [8086:1c2c] type 0 class 0x000c03
[ 0.527152] pci 0000:00:1a.0: reg 20: [io 0x2140-0x215f]
[ 0.527216] pci 0000:00:1a.7: [8086:1c2d] type 0 class 0x000c03
[ 0.527239] pci 0000:00:1a.7: reg 10: [mem 0xa0606c00-0xa0606fff]
[ 0.527318] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.527323] pci 0000:00:1a.7: PME# disabled
[ 0.527351] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.527369] pci 0000:00:1b.0: reg 10: [mem 0xa0600000-0xa0603fff 64bit]
[ 0.527430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.527435] pci 0000:00:1b.0: PME# disabled
[ 0.527463] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.527566] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.527571] pci 0000:00:1c.0: PME# disabled
[ 0.527608] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.527710] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.527716] pci 0000:00:1c.1: PME# disabled
[ 0.527760] pci 0000:00:1d.0: [8086:1c27] type 0 class 0x000c03
[ 0.527807] pci 0000:00:1d.0: reg 20: [io 0x20e0-0x20ff]
[ 0.527876] pci 0000:00:1d.7: [8086:1c26] type 0 class 0x000c03
[ 0.527899] pci 0000:00:1d.7: reg 10: [mem 0xa0606800-0xa0606bff]
[ 0.527978] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.527983] pci 0000:00:1d.7: PME# disabled
[ 0.528013] pci 0000:00:1f.0: [8086:1c4d] type 0 class 0x000601
[ 0.528138] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 0.528160] pci 0000:00:1f.2: reg 10: [io 0x2168-0x216f]
[ 0.528169] pci 0000:00:1f.2: reg 14: [io 0x217c-0x217f]
[ 0.528179] pci 0000:00:1f.2: reg 18: [io 0x2160-0x2167]
[ 0.528188] pci 0000:00:1f.2: reg 1c: [io 0x2178-0x217b]
[ 0.528197] pci 0000:00:1f.2: reg 20: [io 0x2060-0x207f]
[ 0.528207] pci 0000:00:1f.2: reg 24: [mem 0xa0606000-0xa06067ff]
[ 0.528243] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.528248] pci 0000:00:1f.2: PME# disabled
[ 0.528268] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.528286] pci 0000:00:1f.3: reg 10: [mem 0xa0607000-0xa06070ff 64bit]
[ 0.528309] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.528377] pci 0000:03:00.0: [8086:151a] type 1 class 0x000604
[ 0.528426] pci 0000:03:00.0: supports D1 D2
[ 0.528428] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.528431] pci 0000:03:00.0: PME# disabled
[ 0.529869] pci 0000:00:01.0: PCI bridge to [bus 03-97]
[ 0.529876] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.529882] pci 0000:00:01.0: bridge window [mem 0xa0700000-0xa49fffff]
[ 0.529892] pci 0000:00:01.0: bridge window [mem 0xa4a00000-0xa89fffff 64bit pref]
[ 0.529956] pci 0000:04:00.0: [8086:151a] type 1 class 0x000604
[ 0.530008] pci 0000:04:00.0: supports D1 D2
[ 0.530010] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.530014] pci 0000:04:00.0: PME# disabled
[ 0.530047] pci 0000:04:03.0: [8086:151a] type 1 class 0x000604
[ 0.530098] pci 0000:04:03.0: supports D1 D2
[ 0.530100] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.530104] pci 0000:04:03.0: PME# disabled
[ 0.530132] pci 0000:04:04.0: [8086:151a] type 1 class 0x000604
[ 0.530183] pci 0000:04:04.0: supports D1 D2
[ 0.530185] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.530189] pci 0000:04:04.0: PME# disabled
[ 0.530231] pci 0000:03:00.0: PCI bridge to [bus 04-67]
[ 0.530238] pci 0000:03:00.0: bridge window [mem 0xa0700000-0xa09fffff]
[ 0.530297] pci 0000:05:00.0: [8086:151a] type 0 class 0x000880
[ 0.530312] pci 0000:05:00.0: reg 10: [mem 0xa0700000-0xa073ffff]
[ 0.530323] pci 0000:05:00.0: reg 14: [mem 0xa0740000-0xa0740fff]
[ 0.530400] pci 0000:05:00.0: supports D1 D2
[ 0.530402] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.530407] pci 0000:05:00.0: PME# disabled
[ 0.531867] pci 0000:04:00.0: PCI bridge to [bus 05-05]
[ 0.531881] pci 0000:04:00.0: bridge window [mem 0xa0700000-0xa07fffff]
[ 0.531943] pci 0000:04:03.0: PCI bridge to [bus 06-36]
[ 0.531951] pci 0000:04:03.0: bridge window [mem 0xa0800000-0xa08fffff]
[ 0.531995] pci 0000:04:04.0: PCI bridge to [bus 37-67]
[ 0.532003] pci 0000:04:04.0: bridge window [mem 0xa0900000-0xa09fffff]
[ 0.532097] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.532106] pci 0000:00:1c.0: bridge window [mem 0xa0500000-0xa05fffff]
[ 0.532266] pci 0000:02:00.0: [14e4:4353] type 0 class 0x000280
[ 0.532318] pci 0000:02:00.0: reg 10: [mem 0xa0400000-0xa0403fff 64bit]
[ 0.532524] pci 0000:02:00.0: supports D1 D2
[ 0.532526] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.532536] pci 0000:02:00.0: PME# disabled
[ 0.533879] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.533893] pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff]
[ 0.533927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.534099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.534221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.534358] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.534538] pci0000:00: ACPI _OSC control (0x19) granted
[ 0.538802] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.538866] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.538923] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.538980] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.539036] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.539091] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.539145] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.539202] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.539307] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.539318] vgaarb: loaded
[ 0.539319] vgaarb: bridge control possible 0000:00:02.0
[ 0.539430] SCSI subsystem initialized
[ 0.539446] libata version 3.00 loaded.
[ 0.539501] PCI: Using ACPI for IRQ routing
[ 0.543584] PCI: pci_cache_line_size set to 64 bytes
[ 0.543710] reserve RAM buffer: 000000000008f000 - 000000000008ffff
[ 0.543712] reserve RAM buffer: 000000008ad36000 - 000000008bffffff
[ 0.543717] reserve RAM buffer: 000000008ad6f000 - 000000008bffffff
[ 0.543720] reserve RAM buffer: 000000008ae33000 - 000000008bffffff
[ 0.543723] reserve RAM buffer: 000000008aed2000 - 000000008bffffff
[ 0.543726] reserve RAM buffer: 000000008afa2000 - 000000008bffffff
[ 0.543728] reserve RAM buffer: 000000016fe00000 - 000000016fffffff
[ 0.543841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.543847] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.545867] Switching to clocksource hpet
[ 0.548891] pnp: PnP ACPI init
[ 0.548906] ACPI: bus type pnp registered
[ 0.549107] pnp 00:00: [bus 00-ff]
[ 0.549110] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.549113] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.549115] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.549117] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.549120] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.549122] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.549124] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.549126] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.549129] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.549131] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.549133] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.549135] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.549137] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.549141] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.549143] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.549145] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.549147] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.549150] pnp 00:00: [mem 0x8fa00000-0xfeafffff window]
[ 0.549152] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.549205] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.549299] pnp 00:01: [io 0x0000-0x001f]
[ 0.549301] pnp 00:01: [io 0x0081-0x0091]
[ 0.549303] pnp 00:01: [io 0x0093-0x009f]
[ 0.549305] pnp 00:01: [io 0x00c0-0x00df]
[ 0.549307] pnp 00:01: [dma 4]
[ 0.549339] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.549348] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.549376] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.549466] pnp 00:03: [irq 0 disabled]
[ 0.549475] pnp 00:03: [irq 8]
[ 0.549477] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.549527] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.549531] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.549543] pnp 00:04: [io 0x00f0]
[ 0.549549] pnp 00:04: [irq 13]
[ 0.549578] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.549590] pnp 00:05: [io 0x002e-0x002f]
[ 0.549592] pnp 00:05: [io 0x004e-0x004f]
[ 0.549594] pnp 00:05: [io 0x0061]
[ 0.549596] pnp 00:05: [io 0x0063]
[ 0.549597] pnp 00:05: [io 0x0065]
[ 0.549599] pnp 00:05: [io 0x0067]
[ 0.549601] pnp 00:05: [io 0x0080]
[ 0.549603] pnp 00:05: [io 0x0092]
[ 0.549605] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.549607] pnp 00:05: [io 0x1000-0x100f]
[ 0.549609] pnp 00:05: [io 0x0400-0x047f]
[ 0.549610] pnp 00:05: [io 0x0500-0x057f]
[ 0.549658] system 00:05: [io 0x1000-0x100f] has been reserved
[ 0.549662] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.549664] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.549667] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.549677] pnp 00:06: [io 0x0070-0x0077]
[ 0.549706] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.549720] pnp 00:07: [io 0x0300-0x031f]
[ 0.549725] pnp 00:07: [irq 6]
[ 0.549755] pnp 00:07: Plug and Play ACPI device, IDs APP0001 (active)
[ 0.549943] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.549945] pnp 00:08: [mem 0xfed10000-0xfed17fff]
[ 0.549947] pnp 00:08: [mem 0xfed18000-0xfed18fff]
[ 0.549949] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[ 0.549951] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.549953] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.549955] pnp 00:08: [mem 0xfed90000-0xfed93fff]
[ 0.549957] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[ 0.549959] pnp 00:08: [mem 0xff000000-0xffffffff]
[ 0.549961] pnp 00:08: [mem 0xfee00000-0xfeefffff]
[ 0.549964] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.550019] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.550022] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.550025] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.550028] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.550031] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.550034] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.550037] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.550039] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.550042] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.550045] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.550048] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.555807] pnp 00:09: [mem 0x20000000-0x201fffff]
[ 0.555809] pnp 00:09: [mem 0x40000000-0x401fffff]
[ 0.555909] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[ 0.555920] system 00:09: [mem 0x40000000-0x401fffff] has been reserved
[ 0.555923] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.555933] pnp: PnP ACPI: found 10 devices
[ 0.555935] ACPI: ACPI bus type pnp unregistered
[ 0.562891] PCI: max bus depth: 3 pci_try_num: 4
[ 0.562954] pci 0000:04:00.0: PCI bridge to [bus 05-05]
[ 0.562959] pci 0000:04:00.0: bridge window [mem 0xa0700000-0xa07fffff]
[ 0.562967] pci 0000:04:03.0: PCI bridge to [bus 06-36]
[ 0.562972] pci 0000:04:03.0: bridge window [mem 0xa0800000-0xa08fffff]
[ 0.562980] pci 0000:04:04.0: PCI bridge to [bus 37-67]
[ 0.562985] pci 0000:04:04.0: bridge window [mem 0xa0900000-0xa09fffff]
[ 0.562993] pci 0000:03:00.0: PCI bridge to [bus 04-67]
[ 0.562997] pci 0000:03:00.0: bridge window [mem 0xa0700000-0xa09fffff]
[ 0.563005] pci 0000:00:01.0: PCI bridge to [bus 03-97]
[ 0.563007] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.563011] pci 0000:00:01.0: bridge window [mem 0xa0700000-0xa49fffff]
[ 0.563014] pci 0000:00:01.0: bridge window [mem 0xa4a00000-0xa89fffff 64bit pref]
[ 0.563019] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.563026] pci 0000:00:1c.0: bridge window [mem 0xa0500000-0xa05fffff]
[ 0.563039] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.563047] pci 0000:00:1c.1: bridge window [mem 0xa0400000-0xa04fffff]
[ 0.563070] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.563074] pci 0000:00:01.0: setting latency timer to 64
[ 0.563080] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.563084] pci 0000:03:00.0: setting latency timer to 64
[ 0.563090] pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.563094] pci 0000:04:00.0: setting latency timer to 64
[ 0.563099] pci 0000:04:03.0: enabling device (0000 -> 0002)
[ 0.563106] pci 0000:04:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.563111] pci 0000:04:03.0: setting latency timer to 64
[ 0.563117] pci 0000:04:04.0: enabling device (0000 -> 0002)
[ 0.563120] pci 0000:04:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.563125] pci 0000:04:04.0: setting latency timer to 64
[ 0.563132] pci 0000:00:1c.0: enabling device (0000 -> 0002)
[ 0.563137] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.563144] pci 0000:00:1c.0: setting latency timer to 64
[ 0.563212] pci 0000:00:1c.1: power state changed by ACPI to D0
[ 0.563217] pci 0000:00:1c.1: power state changed by ACPI to D0
[ 0.563227] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.563233] pci 0000:00:1c.1: setting latency timer to 64
[ 0.563238] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.563240] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.563243] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.563245] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.563247] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.563249] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.563252] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.563254] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.563257] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.563259] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.563261] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.563263] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.563266] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.563268] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.563270] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.563272] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.563275] pci_bus 0000:00: resource 20 [mem 0x8fa00000-0xfeafffff]
[ 0.563277] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[ 0.563279] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.563282] pci_bus 0000:03: resource 1 [mem 0xa0700000-0xa49fffff]
[ 0.563284] pci_bus 0000:03: resource 2 [mem 0xa4a00000-0xa89fffff 64bit pref]
[ 0.563287] pci_bus 0000:04: resource 1 [mem 0xa0700000-0xa09fffff]
[ 0.563289] pci_bus 0000:05: resource 1 [mem 0xa0700000-0xa07fffff]
[ 0.563292] pci_bus 0000:06: resource 1 [mem 0xa0800000-0xa08fffff]
[ 0.563294] pci_bus 0000:37: resource 1 [mem 0xa0900000-0xa09fffff]
[ 0.563296] pci_bus 0000:01: resource 1 [mem 0xa0500000-0xa05fffff]
[ 0.563299] pci_bus 0000:02: resource 1 [mem 0xa0400000-0xa04fffff]
[ 0.563367] NET: Registered protocol family 2
[ 0.563538] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.564633] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.566364] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.566521] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.566524] TCP reno registered
[ 0.566533] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.566557] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.566676] NET: Registered protocol family 1
[ 0.566692] pci 0000:00:02.0: Boot video device
[ 0.566704] pci 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0080
[ 0.566706] pci 0000:00:1a.0: Performing full reset
[ 0.566765] pci 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0080
[ 0.566767] pci 0000:00:1d.0: Performing full reset
[ 0.566860] PCI: CLS 256 bytes, default 64
[ 0.566923] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.566926] Placing 64MB software IO TLB between ffff880083d1e000 - ffff880087d1e000
[ 0.566929] software IO TLB at phys 0x83d1e000 - 0x87d1e000
[ 0.567432] audit: initializing netlink socket (disabled)
[ 0.567442] type=2000 audit(1323648347.406:1): initialized
[ 0.587702] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.597159] VFS: Disk quotas dquot_6.5.2
[ 0.597197] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.597490] msgmni has been set to 7748
[ 0.597647] alg: No test for stdrng (krng)
[ 0.597683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.597686] io scheduler noop registered
[ 0.597688] io scheduler deadline registered
[ 0.597708] io scheduler cfq registered (default)
[ 0.597796] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.597825] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.598037] pcieport 0000:03:00.0: setting latency timer to 64
[ 0.598072] pcieport 0000:03:00.0: irq 41 for MSI/MSI-X
[ 0.598150] pcieport 0000:04:00.0: setting latency timer to 64
[ 0.598186] pcieport 0000:04:00.0: irq 42 for MSI/MSI-X
[ 0.598265] pcieport 0000:04:03.0: setting latency timer to 64
[ 0.598301] pcieport 0000:04:03.0: irq 43 for MSI/MSI-X
[ 0.598378] pcieport 0000:04:04.0: setting latency timer to 64
[ 0.598414] pcieport 0000:04:04.0: irq 44 for MSI/MSI-X
[ 0.598597] efifb: probing for efifb
[ 0.600178] efifb: framebuffer at 0x90000000, mapped to 0xffffc9000a900000, using 4224k, total 4224k
[ 0.600181] efifb: mode is 1366x768x32, linelength=5632, pages=1
[ 0.600183] efifb: scrolling: redraw
[ 0.600185] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.603411] Console: switching to colour frame buffer device 170x48
[ 0.606470] fb0: EFI VGA frame buffer device
[ 0.606478] intel_idle: MWAIT substates: 0x21120
[ 0.606480] intel_idle: v0.4 model 0x2A
[ 0.606482] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.606530] ERST: Table is not found!
[ 0.606532] GHES: HEST is not enabled!
[ 0.606588] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.651164] Linux agpgart interface v0.103
[ 0.651257] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 0.651457] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.653389] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.653500] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x90000000
[ 0.653624] ahci 0000:00:1f.2: version 3.0
[ 0.653635] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.653687] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.653737] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[ 0.653741] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.653747] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.654324] scsi0 : ahci
[ 0.654427] scsi1 : ahci
[ 0.654502] scsi2 : ahci
[ 0.654573] scsi3 : ahci
[ 0.654643] scsi4 : ahci
[ 0.654715] scsi5 : ahci
[ 0.654842] ata1: SATA max UDMA/133 abar m2048@0xa0606000 port 0xa0606100 irq 45
[ 0.654844] ata2: DUMMY
[ 0.654846] ata3: DUMMY
[ 0.654847] ata4: DUMMY
[ 0.654848] ata5: DUMMY
[ 0.654849] ata6: DUMMY
[ 0.654942] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.655834] i8042: No controller found
[ 0.655926] mousedev: PS/2 mouse device common for all mice
[ 0.655967] rtc_cmos 00:06: RTC can wake from S4
[ 0.656088] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.656119] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.656127] Linux telephony interface: v1.00
[ 0.656268] cpuidle: using governor ladder
[ 0.656478] cpuidle: using governor menu
[ 0.656630] TCP cubic registered
[ 0.656717] NET: Registered protocol family 10
[ 0.657193] Mobile IPv6
[ 0.657196] NET: Registered protocol family 17
[ 0.657200] Registering the dns_resolver key type
[ 0.657345] PM: Checking hibernation image partition /dev/sda2
[ 0.959383] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.960988] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.962135] ata1.00: ATA-8: APPLE SSD SM256C, AXM09A1Q, max UDMA/133
[ 0.962151] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.962588] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 0.963852] ata1.00: configured for UDMA/133
[ 0.964143] scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM256C AXM0 PQ: 0 ANSI: 5
[ 0.964438] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/233 GiB)
[ 0.964905] sd 0:0:0:0: [sda] Write Protect is off
[ 0.964909] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.965064] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.968829] sda: sda1 sda2 sda3 sda4
[ 0.969926] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.969976] PM: Hibernation image partition 8:2 present
[ 0.969979] PM: Looking for hibernation image.
[ 0.970402] PM: Image not found (code -22)
[ 0.970405] PM: Hibernation image not present or could not be loaded.
[ 0.970420] registered taskstats version 1
[ 0.975735] rtc_cmos 00:06: setting system clock to 2011-12-12 00:05:48 UTC (1323648348)
[ 0.975813] Initializing network drop monitor service
[ 0.979429] kjournald starting. Commit interval 5 seconds
[ 0.979489] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 0.979499] VFS: Mounted root (ext3 filesystem) readonly on device 8:4.
[ 0.980054] devtmpfs: mounted
[ 0.981102] Freeing unused kernel memory: 592k freed
[ 0.981190] Write protecting the kernel read-only data: 8192k
[ 0.985598] Freeing unused kernel memory: 1356k freed
[ 0.987580] Freeing unused kernel memory: 552k freed
[ 1.119369] udevd[103]: starting version 175
[ 1.211273] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.211320] ACPI: Lid Switch [LID0]
[ 1.211384] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.211390] ACPI: Power Button [PWRB]
[ 1.211458] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.211464] ACPI: Sleep Button [SLPB]
[ 1.211529] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.211534] ACPI: Power Button [PWRF]
[ 1.217016] ACPI: AC Adapter [ADP1] (on-line)
[ 1.221758] usbcore: registered new interface driver usbfs
[ 1.221782] usbcore: registered new interface driver hub
[ 1.223372] usbcore: registered new device driver usb
[ 1.230537] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.230543] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 1.230585] ehci_hcd 0000:00:1a.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.230612] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.230618] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.230641] drivers/usb/core/inode.c: creating file 'devices'
[ 1.230648] drivers/usb/core/inode.c: creating file '001'
[ 1.230653] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.230665] ehci_hcd 0000:00:1a.7: reset hcs_params 0x203206 dbg=2 cc=3 pcc=2 ordered !ppc ports=6
[ 1.230671] ehci_hcd 0000:00:1a.7: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.230692] ehci_hcd 0000:00:1a.7: support lpm
[ 1.230708] ehci_hcd 0000:00:1a.7: debug port 2
[ 1.230714] ehci_hcd 0000:00:1a.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 1.234604] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 1.234610] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 1.234633] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xa0606c00
[ 1.234641] ehci_hcd 0000:00:1a.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.238532] ehci_hcd 0000:00:1a.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.241697] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.244860] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.244895] usb usb1: default language 0x0409
[ 1.244906] usb usb1: udev 1, busnum 1, minor = 0
[ 1.244910] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.244914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.244918] usb usb1: Product: EHCI Host Controller
[ 1.244921] usb usb1: Manufacturer: Linux 3.2.0-rc5-00021-g899e4f0 ehci_hcd
[ 1.244924] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.245038] usb usb1: usb_probe_device
[ 1.245043] usb usb1: configuration #1 chosen from 1 choice
[ 1.245053] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.245088] hub 1-0:1.0: usb_probe_interface
[ 1.245091] hub 1-0:1.0: usb_probe_interface - got id
[ 1.245095] hub 1-0:1.0: USB hub found
[ 1.245101] hub 1-0:1.0: 6 ports detected
[ 1.245104] hub 1-0:1.0: standalone hub
[ 1.245107] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.245110] hub 1-0:1.0: individual port over-current protection
[ 1.245113] hub 1-0:1.0: power on to power good time: 20ms
[ 1.245118] hub 1-0:1.0: local power source is good
[ 1.245122] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 1.245167] drivers/usb/core/inode.c: creating file '001'
[ 1.245245] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.245275] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.245281] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.245290] drivers/usb/core/inode.c: creating file '002'
[ 1.245296] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.245307] ehci_hcd 0000:00:1d.7: reset hcs_params 0x204208 dbg=2 cc=4 pcc=2 ordered !ppc ports=8
[ 1.245313] ehci_hcd 0000:00:1d.7: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 1.245331] ehci_hcd 0000:00:1d.7: support lpm
[ 1.245344] ehci_hcd 0000:00:1d.7: debug port 2
[ 1.245351] ehci_hcd 0000:00:1d.7: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT
[ 1.246151] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.249230] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 1.249234] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 1.249253] ehci_hcd 0000:00:1d.7: irq 22, io mem 0xa0606800
[ 1.249258] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 1.253127] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 1.258838] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.258873] usb usb2: default language 0x0409
[ 1.258884] usb usb2: udev 1, busnum 2, minor = 128
[ 1.258887] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.258891] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.258894] usb usb2: Product: EHCI Host Controller
[ 1.258897] usb usb2: Manufacturer: Linux 3.2.0-rc5-00021-g899e4f0 ehci_hcd
[ 1.258900] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.259008] usb usb2: usb_probe_device
[ 1.259011] usb usb2: configuration #1 chosen from 1 choice
[ 1.259019] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.259054] hub 2-0:1.0: usb_probe_interface
[ 1.259057] hub 2-0:1.0: usb_probe_interface - got id
[ 1.259061] hub 2-0:1.0: USB hub found
[ 1.259067] hub 2-0:1.0: 8 ports detected
[ 1.259070] hub 2-0:1.0: standalone hub
[ 1.259072] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.259075] hub 2-0:1.0: individual port over-current protection
[ 1.259078] hub 2-0:1.0: power on to power good time: 20ms
[ 1.259084] hub 2-0:1.0: local power source is good
[ 1.259088] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 1.259137] drivers/usb/core/inode.c: creating file '001'
[ 1.259417] uhci_hcd 0000:00:1a.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.259429] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.259434] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.259443] drivers/usb/core/inode.c: creating file '003'
[ 1.259449] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.259461] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.259495] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.259498] uhci_hcd 0000:00:1a.0: Performing full reset
[ 1.259644] uhci_hcd 0000:00:1a.0: irq 21, io base 0x00002140
[ 1.259680] usb usb3: default language 0x0409
[ 1.259686] usb usb3: udev 1, busnum 3, minor = 256
[ 1.259688] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.259691] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.259693] usb usb3: Product: UHCI Host Controller
[ 1.259696] usb usb3: Manufacturer: Linux 3.2.0-rc5-00021-g899e4f0 uhci_hcd
[ 1.259699] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.259911] usb usb3: usb_probe_device
[ 1.259916] usb usb3: configuration #1 chosen from 1 choice
[ 1.259926] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 1.259965] hub 3-0:1.0: usb_probe_interface
[ 1.259968] hub 3-0:1.0: usb_probe_interface - got id
[ 1.259971] hub 3-0:1.0: USB hub found
[ 1.259978] hub 3-0:1.0: 2 ports detected
[ 1.259980] hub 3-0:1.0: standalone hub
[ 1.259983] hub 3-0:1.0: no power switching (usb 1.0)
[ 1.259985] hub 3-0:1.0: individual port over-current protection
[ 1.259988] hub 3-0:1.0: power on to power good time: 2ms
[ 1.259994] hub 3-0:1.0: local power source is good
[ 1.259997] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 1.260037] drivers/usb/core/inode.c: creating file '001'
[ 1.260071] ehci_hcd 0000:00:1a.7: HS companion for 0000:00:1a.0
[ 1.260091] uhci_hcd 0000:00:1d.0: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.260098] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.260102] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.260107] drivers/usb/core/inode.c: creating file '004'
[ 1.260111] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.260118] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.260123] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 1.260125] uhci_hcd 0000:00:1d.0: Performing full reset
[ 1.260152] uhci_hcd 0000:00:1d.0: irq 19, io base 0x000020e0
[ 1.260214] usb usb4: default language 0x0409
[ 1.260264] usb usb4: udev 1, busnum 4, minor = 384
[ 1.260267] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.260270] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260274] usb usb4: Product: UHCI Host Controller
[ 1.260276] usb usb4: Manufacturer: Linux 3.2.0-rc5-00021-g899e4f0 uhci_hcd
[ 1.260279] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.260483] usb usb4: usb_probe_device
[ 1.260487] usb usb4: configuration #1 chosen from 1 choice
[ 1.260497] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 1.260559] hub 4-0:1.0: usb_probe_interface
[ 1.260562] hub 4-0:1.0: usb_probe_interface - got id
[ 1.260565] hub 4-0:1.0: USB hub found
[ 1.260572] hub 4-0:1.0: 2 ports detected
[ 1.260575] hub 4-0:1.0: standalone hub
[ 1.260577] hub 4-0:1.0: no power switching (usb 1.0)
[ 1.260580] hub 4-0:1.0: individual port over-current protection
[ 1.260583] hub 4-0:1.0: power on to power good time: 2ms
[ 1.260588] hub 4-0:1.0: local power source is good
[ 1.260592] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 1.260618] drivers/usb/core/inode.c: creating file '001'
[ 1.260661] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[ 1.319627] ACPI: Battery Slot [BAT0] (battery present)
[ 1.322053] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[ 1.322081] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.340640] cfg80211: Calling CRDA to update world regulatory domain
[ 1.345651] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.345660] hub 1-0:1.0: port 1: status 0501 change 0001
[ 1.345673] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.345678] hub 1-0:1.0: port 2: status 0501 change 0001
[ 1.354771] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 0
[ 1.354819] brcmsmac 0000:02:00.0: enabling device (0000 -> 0002)
[ 1.354832] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.354849] brcmsmac 0000:02:00.0: setting latency timer to 64
[ 1.359684] uhci_hcd 0000:00:1a.0: port 1 portsc 0082,00
[ 1.359698] uhci_hcd 0000:00:1a.0: port 2 portsc 0082,00
[ 1.359721] uhci_hcd 0000:00:1d.0: port 1 portsc 0082,00
[ 1.360357] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 1.360362] hub 2-0:1.0: port 1: status 0501 change 0001
[ 1.420114] applesmc: : read arg fail
[ 1.445191] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 1.445202] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.445216] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 1.445267] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 1.445295] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 1.445559] hub 1-0:1.0: state 7 ports 6 chg 0006 evt 0000
[ 1.445570] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.496779] ehci_hcd 0000:00:1a.7: port 1 high speed
[ 1.496785] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.508297] applesmc: key=349 fan=1 temp=25 acc=0 lux=2 kbd=1
[ 1.508300] applesmc: init_smcreg() took 50 ms
[ 1.508585] Registered led device: smc::kbd_backlight
[ 1.547477] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.566426] Refined TSC clocksource calibration: 1800.012 MHz.
[ 1.566432] Switching to clocksource tsc
[ 1.598621] ehci_hcd 0000:00:1a.7: port 1 high speed
[ 1.598627] ehci_hcd 0000:00:1a.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.661437] ehci_hcd 0000:00:1a.7: set dev address 2 for port 1
[ 1.661444] ehci_hcd 0000:00:1a.7: LPM: no device attached
[ 1.661726] usb 1-1: udev 2, busnum 1, minor = 1
[ 1.661739] usb 1-1: New USB device found, idVendor=0424, idProduct=2513
[ 1.661742] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.661911] usb 1-1: usb_probe_device
[ 1.661917] usb 1-1: configuration #1 chosen from 1 choice
[ 1.662046] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 1.662080] hub 1-1:1.0: usb_probe_interface
[ 1.662084] hub 1-1:1.0: usb_probe_interface - got id
[ 1.662088] hub 1-1:1.0: USB hub found
[ 1.662185] hub 1-1:1.0: 3 ports detected
[ 1.662194] hub 1-1:1.0: compound device; port removable status: FFR
[ 1.662197] hub 1-1:1.0: individual port power switching
[ 1.662199] hub 1-1:1.0: individual port over-current protection
[ 1.662336] hub 1-1:1.0: TT per port
[ 1.662340] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 1.662342] hub 1-1:1.0: power on to power good time: 100ms
[ 1.662529] hub 1-1:1.0: local power source is good
[ 1.662535] hub 1-1:1.0: enabling power on all ports
[ 1.662967] drivers/usb/core/inode.c: creating file '002'
[ 1.663012] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 1.713440] ehci_hcd 0000:00:1a.7: port 2 high speed
[ 1.713447] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.762338] hub 1-1:1.0: port 1: status 0101 change 0001
[ 1.762825] hub 1-1:1.0: port 2: status 0101 change 0001
[ 1.764059] usb 1-2: new high-speed USB device number 3 using ehci_hcd
[ 1.815280] ehci_hcd 0000:00:1a.7: port 2 high speed
[ 1.815287] ehci_hcd 0000:00:1a.7: GetStatus port:2 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.862961] usb 1-1: link qh256-0001/ffff880165cf7a40 start 1 [1/0 us]
[ 1.878801] ehci_hcd 0000:00:1a.7: set dev address 3 for port 2
[ 1.878808] ehci_hcd 0000:00:1a.7: LPM: no device attached
[ 1.884996] usb 1-2: skipped 1 descriptor after configuration
[ 1.885000] usb 1-2: skipped 4 descriptors after interface
[ 1.885003] usb 1-2: skipped 1 descriptor after endpoint
[ 1.885005] usb 1-2: skipped 9 descriptors after interface
[ 1.885633] usb 1-2: default language 0x0409
[ 1.889897] usb 1-2: udev 3, busnum 1, minor = 2
[ 1.889911] usb 1-2: New USB device found, idVendor=05ac, idProduct=850a
[ 1.889914] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.889917] usb 1-2: Product: FaceTime Camera (Built-in)
[ 1.889919] usb 1-2: Manufacturer: Apple Inc.
[ 1.889921] usb 1-2: SerialNumber: CCGB6L03L5DL8LFX
[ 1.890121] usb 1-2: usb_probe_device
[ 1.890126] usb 1-2: configuration #1 chosen from 1 choice
[ 1.890888] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[ 1.892940] usb 1-2: adding 1-2:1.1 (config #1, interface 1)
[ 1.892988] usb 1-2: adding 1-2:1.2 (config #1, interface 2)
[ 1.893021] drivers/usb/core/inode.c: creating file '003'
[ 1.893056] hub 2-0:1.0: state 7 ports 8 chg 0002 evt 0000
[ 1.893067] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 1.944080] ehci_hcd 0000:00:1d.7: port 1 high speed
[ 1.944087] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 1.972338] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 1.972517] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 1.972724] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 1.972874] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 1.972955] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 1.973019] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 1.994754] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.045919] ehci_hcd 0000:00:1d.7: port 1 high speed
[ 2.045925] ehci_hcd 0000:00:1d.7: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.108799] ehci_hcd 0000:00:1d.7: set dev address 2 for port 1
[ 2.108805] ehci_hcd 0000:00:1d.7: LPM: no device attached
[ 2.109086] usb 2-1: udev 2, busnum 2, minor = 129
[ 2.109090] usb 2-1: New USB device found, idVendor=0424, idProduct=2513
[ 2.109092] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.109274] usb 2-1: usb_probe_device
[ 2.109280] usb 2-1: configuration #1 chosen from 1 choice
[ 2.109370] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 2.109409] hub 2-1:1.0: usb_probe_interface
[ 2.109412] hub 2-1:1.0: usb_probe_interface - got id
[ 2.109415] hub 2-1:1.0: USB hub found
[ 2.109457] hub 2-1:1.0: 1 port detected
[ 2.109459] hub 2-1:1.0: compound device; port removable status: R
[ 2.109460] hub 2-1:1.0: individual port power switching
[ 2.109462] hub 2-1:1.0: individual port over-current protection
[ 2.109632] hub 2-1:1.0: TT per port
[ 2.109636] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.109638] hub 2-1:1.0: power on to power good time: 100ms
[ 2.109884] hub 2-1:1.0: local power source is good
[ 2.109895] hub 2-1:1.0: enabling power on all ports
[ 2.109977] drivers/usb/core/inode.c: creating file '002'
[ 2.110027] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.110034] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.110038] hub 1-1:1.0: state 7 ports 3 chg 0006 evt 0000
[ 2.110109] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 2.120783] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
[ 2.182695] usb 1-1.1: new full-speed USB device number 4 using ehci_hcd
[ 2.193664] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
[ 2.209644] usb 2-1: link qh256-0001/ffff880165cf7e40 start 1 [1/0 us]
[ 2.267333] usb 1-1.1: ep0 maxpacket = 8
[ 2.269160] usb 1-1.1: default language 0x0409
[ 2.269658] usb 1-1.1: udev 4, busnum 1, minor = 3
[ 2.269672] usb 1-1.1: New USB device found, idVendor=0a5c, idProduct=4500
[ 2.269675] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.269678] usb 1-1.1: Product: BRCM20702 Hub
[ 2.269680] usb 1-1.1: Manufacturer: Apple Inc.
[ 2.269864] usb 1-1.1: usb_probe_device
[ 2.269869] usb 1-1.1: configuration #1 chosen from 1 choice
[ 2.270130] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[ 2.270171] hub 1-1.1:1.0: usb_probe_interface
[ 2.270174] hub 1-1.1:1.0: usb_probe_interface - got id
[ 2.270177] hub 1-1.1:1.0: USB hub found
[ 2.270360] hub 1-1.1:1.0: 3 ports detected
[ 2.270364] hub 1-1.1:1.0: compound device; port removable status: FFF
[ 2.270366] hub 1-1.1:1.0: ganged power switching
[ 2.270368] hub 1-1.1:1.0: global over-current protection
[ 2.270370] hub 1-1.1:1.0: power on to power good time: 100ms
[ 2.270671] hub 1-1.1:1.0: local power source is good
[ 2.270688] hub 1-1.1:1.0: no over-current condition exists
[ 2.270691] hub 1-1.1:1.0: enabling power on all ports
[ 2.271440] drivers/usb/core/inode.c: creating file '004'
[ 2.271611] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 2.282526] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
[ 2.344441] usb 1-1.2: new full-speed USB device number 5 using ehci_hcd
[ 2.355413] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
[ 2.361181] usb usb3: suspend_rh (auto-stop)
[ 2.361208] usb usb4: suspend_rh (auto-stop)
[ 2.371383] hub 1-1.1:1.0: port 1: status 0101 change 0001
[ 2.371896] hub 1-1.1:1.0: port 2: status 0101 change 0001
[ 2.372370] hub 1-1.1:1.0: port 3: status 0101 change 0001
[ 2.429085] usb 1-1.2: ep0 maxpacket = 8
[ 2.433205] usb 1-1.2: skipped 1 descriptor after interface
[ 2.433209] usb 1-1.2: skipped 1 descriptor after interface
[ 2.433212] usb 1-1.2: skipped 1 descriptor after interface
[ 2.433527] usb 1-1.2: default language 0x0409
[ 2.435664] usb 1-1.2: udev 5, busnum 1, minor = 4
[ 2.435678] usb 1-1.2: New USB device found, idVendor=05ac, idProduct=0249
[ 2.435680] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.435683] usb 1-1.2: Product: Apple Internal Keyboard / Trackpad
[ 2.435685] usb 1-1.2: Manufacturer: Apple Inc.
[ 2.435869] usb 1-1.2: usb_probe_device
[ 2.435875] usb 1-1.2: configuration #1 chosen from 1 choice
[ 2.436137] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 2.437319] usb 1-1.2: adding 1-1.2:1.1 (config #1, interface 1)
[ 2.437944] usb 1-1.2: adding 1-1.2:1.2 (config #1, interface 2)
[ 2.438568] drivers/usb/core/inode.c: creating file '005'
[ 2.438595] hub 2-1:1.0: state 7 ports 1 chg 0000 evt 0000
[ 2.445394] bcm5974 1-1.2:1.2: usb_probe_interface
[ 2.445399] bcm5974 1-1.2:1.2: usb_probe_interface - got id
[ 2.445463] input: bcm5974 as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.2/input/input8
[ 2.445556] usbcore: registered new interface driver bcm5974
[ 2.445976] Linux media interface: v0.10
[ 2.449925] Linux video capture interface: v2.00
[ 2.450620] usbhid 1-1.2:1.0: usb_probe_interface
[ 2.450635] usbhid 1-1.2:1.0: usb_probe_interface - got id
[ 2.450690] usbhid 1-1.2:1.1: usb_probe_interface
[ 2.450692] usbhid 1-1.2:1.1: usb_probe_interface - got id
[ 2.450733] usbcore: registered new interface driver usbhid
[ 2.450735] usbhid: USB HID core driver
[ 2.452447] uvcvideo 1-2:1.0: usb_probe_interface
[ 2.452452] uvcvideo 1-2:1.0: usb_probe_interface - got id
[ 2.452473] uvcvideo: Found UVC 1.00 device FaceTime Camera (Built-in) (05ac:850a)
[ 2.457453] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.2/1-1.2:1.0/input/input9
[ 2.457477] usb 1-1.2: link qh8-0e01/ffff880165d8fe40 start 2 [1/2 us]
[ 2.457561] apple 0003:05AC:0249.0001: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input0
[ 2.461089] input: FaceTime Camera (Built-in) as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input10
[ 2.461187] usbcore: registered new interface driver uvcvideo
[ 2.461189] USB Video Class driver (1.1.1)
[ 2.463278] usb 1-2: link qh4-0001/ffff88016715cf40 start 3 [1/0 us]
[ 2.463319] usb 1-2: unlink qh4-0001/ffff88016715cf40 start 3 [1/0 us]
[ 2.472010] usb 1-1.1: link qh128-0e01/ffff880165d8fb40 start 4 [1/2 us]
[ 2.472054] hub 1-1.1:1.0: state 7 ports 3 chg 000e evt 0000
[ 2.472357] hub 1-1.1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 2.534147] usb 1-1.1.1: new full-speed USB device number 6 using ehci_hcd
[ 2.545118] hub 1-1.1:1.0: port 1 not reset yet, waiting 10ms
[ 2.579936] apple 0003:05AC:0249.0002: hidraw1: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:1a.7-1.2/input1
[ 2.618782] usb 1-1.1.1: ep0 maxpacket = 8
[ 2.621998] usb 1-1.1.1: skipped 1 descriptor after interface
[ 2.622004] usb 1-1.1.1: udev 6, busnum 1, minor = 5
[ 2.622006] usb 1-1.1.1: New USB device found, idVendor=05ac, idProduct=820a
[ 2.622009] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.622192] usb 1-1.1.1: usb_probe_device
[ 2.622198] usb 1-1.1.1: configuration #1 chosen from 1 choice
[ 2.622295] usb 1-1.1.1: adding 1-1.1.1:1.0 (config #1, interface 0)
[ 2.622333] usbhid 1-1.1.1:1.0: usb_probe_interface
[ 2.622337] usbhid 1-1.1.1:1.0: usb_probe_interface - got id
[ 2.623677] input: HID 05ac:820a as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input11
[ 2.623709] usb 1-1.1.1: link qh8-0e01/ffff880165d931c0 start 5 [1/2 us]
[ 2.623899] generic-usb 0003:05AC:820A.0003: input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:1a.7-1.1.1/input0
[ 2.623931] drivers/usb/core/inode.c: creating file '006'
[ 2.624245] hub 1-1.1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 2.634988] hub 1-1.1:1.0: port 2 not reset yet, waiting 10ms
[ 2.696890] usb 1-1.1.2: new full-speed USB device number 7 using ehci_hcd
[ 2.771549] usb 1-1.1.2: ep0 maxpacket = 8
[ 2.774528] usb 1-1.1.2: skipped 1 descriptor after interface
[ 2.774533] usb 1-1.1.2: udev 7, busnum 1, minor = 6
[ 2.774536] usb 1-1.1.2: New USB device found, idVendor=05ac, idProduct=820b
[ 2.774538] usb 1-1.1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.774721] usb 1-1.1.2: usb_probe_device
[ 2.774728] usb 1-1.1.2: configuration #1 chosen from 1 choice
[ 2.774963] usb 1-1.1.2: adding 1-1.1.2:1.0 (config #1, interface 0)
[ 2.775007] usbhid 1-1.1.2:1.0: usb_probe_interface
[ 2.775011] usbhid 1-1.1.2:1.0: usb_probe_interface - got id
[ 2.776408] input: HID 05ac:820b as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1.1/1-1.1.2/1-1.1.2:1.0/input/input12
[ 2.776716] generic-usb 0003:05AC:820B.0004: input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:1a.7-1.1.2/input0
[ 2.776750] drivers/usb/core/inode.c: creating file '007'
[ 2.776989] hub 1-1.1:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 2.787744] hub 1-1.1:1.0: port 3 not reset yet, waiting 10ms
[ 2.849658] usb 1-1.1.3: new full-speed USB device number 8 using ehci_hcd
[ 2.860634] hub 1-1.1:1.0: port 3 not reset yet, waiting 10ms
[ 2.937139] usb 1-1.1.3: skipped 1 descriptor after interface
[ 2.937496] usb 1-1.1.3: default language 0x0409
[ 2.938252] usb 1-1.1.3: udev 8, busnum 1, minor = 7
[ 2.938266] usb 1-1.1.3: New USB device found, idVendor=05ac, idProduct=821f
[ 2.938269] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.938272] usb 1-1.1.3: Product: Bluetooth USB Host Controller
[ 2.938274] usb 1-1.1.3: Manufacturer: Apple Inc.
[ 2.938458] usb 1-1.1.3: usb_probe_device
[ 2.938464] usb 1-1.1.3: configuration #1 chosen from 1 choice
[ 2.938555] usb 1-1.1.3: adding 1-1.1.3:1.0 (config #1, interface 0)
[ 2.938644] usb 1-1.1.3: adding 1-1.1.3:1.1 (config #1, interface 1)
[ 2.938715] usb 1-1.1.3: adding 1-1.1.3:1.2 (config #1, interface 2)
[ 2.938780] usb 1-1.1.3: adding 1-1.1.3:1.3 (config #1, interface 3)
[ 2.938809] drivers/usb/core/inode.c: creating file '008'
[ 2.938844] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0008
[ 2.951992] Bluetooth: Core ver 2.16
[ 2.952009] NET: Registered protocol family 31
[ 2.952011] Bluetooth: HCI device and connection manager initialized
[ 2.952014] Bluetooth: HCI socket layer initialized
[ 2.952015] Bluetooth: L2CAP socket layer initialized
[ 2.952020] Bluetooth: SCO socket layer initialized
[ 2.953395] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 2.953416] btusb 1-1.1.3:1.0: usb_probe_interface
[ 2.953419] btusb 1-1.1.3:1.0: usb_probe_interface - got id
[ 2.953797] btusb 1-1.1.3:1.2: usb_probe_interface
[ 2.953801] btusb 1-1.1.3:1.2: usb_probe_interface - got id
[ 2.953809] btusb 1-1.1.3:1.3: usb_probe_interface
[ 2.953811] btusb 1-1.1.3:1.3: usb_probe_interface - got id
[ 2.953868] usb 1-1.1.3: link qh1-0e01/ffff880165cf74c0 start 0 [1/2 us]
[ 2.953871] usbcore: registered new interface driver btusb
[ 2.977214] usb 1-1.1.1: unlink qh8-0e01/ffff880165d931c0 start 5 [1/2 us]
[ 2.990207] ehci_hcd 0000:00:1a.7: reused qh ffff880165d931c0 schedule
[ 2.990214] usb 1-1.1.1: link qh8-0e01/ffff880165d931c0 start 5 [1/2 us]
[ 3.009048] usb 1-1.1.1: unlink qh8-0e01/ffff880165d931c0 start 5 [1/2 us]
[ 3.032029] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0006
[ 3.032295] hub 1-1.1:1.0: port 1, status 0100, change 0001, 12 Mb/s
[ 3.032301] usb 1-1.1.1: USB disconnect, device number 6
[ 3.032304] usb 1-1.1.1: unregistering device
[ 3.032308] usb 1-1.1.1: unregistering interface 1-1.1.1:1.0
[ 3.054150] usb 1-1.1.1: usb_disable_device nuking all URBs
[ 3.158263] EXT3-fs (sda4): using internal journal
[ 3.167087] hub 1-1.1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
[ 3.167314] hub 1-1.1:1.0: port 2, status 0100, change 0001, 12 Mb/s
[ 3.167318] usb 1-1.1.2: USB disconnect, device number 7
[ 3.167320] usb 1-1.1.2: unregistering device
[ 3.167323] usb 1-1.1.2: unregistering interface 1-1.1.2:1.0
[ 3.173967] loop: module loaded
[ 3.180504] usb 1-1.1.2: usb_disable_device nuking all URBs
[ 3.284882] hub 1-1.1:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
[ 3.284889] hub 1-1.1:1.0: state 7 ports 3 chg 0000 evt 0000
[ 4.290842] Adding 4194300k swap on /volatile/swapfile. Priority:-1 extents:1178 across:7720876k SS
[ 4.369125] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 4.550625] RPC: Registered named UNIX socket transport module.
[ 4.550629] RPC: Registered udp transport module.
[ 4.550632] RPC: Registered tcp transport module.
[ 4.550634] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.557003] FS-Cache: Loaded
[ 4.563178] FS-Cache: Netfs 'nfs' registered for caching
[ 4.569979] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 4.685168] fuse init (API version 7.17)
[ 4.939118] hub 2-1:1.0: hub_suspend
[ 4.939134] usb 1-2: usb auto-suspend, wakeup 0
[ 4.939152] usb 2-1: unlink qh256-0001/ffff880165cf7e40 start 1 [1/0 us]
[ 4.939162] hub 3-0:1.0: hub_suspend
[ 4.939169] usb usb3: bus auto-suspend, wakeup 1
[ 4.939172] usb usb3: suspend_rh
[ 4.939188] hub 4-0:1.0: hub_suspend
[ 4.939191] usb usb4: bus auto-suspend, wakeup 1
[ 4.939193] usb usb4: suspend_rh
[ 4.939351] usb 2-1: usb auto-suspend, wakeup 1
[ 5.067852] usb 1-1.1.3: unlink qh1-0e01/ffff880165cf74c0 start 0 [1/2 us]
[ 5.068068] usb 1-1: clear tt buffer port 1, a8 ep2 t04048d82
[ 5.079783] usb 1-1.2: link qh1-0e01/ffff880165c112c0 start 0 [1/2 us]
[ 5.079882] usb 1-1.2: link qh1-0e01/ffff880165f57f40 start 0 [1/3 us]
[ 5.083904] usb 1-1.2: unlink qh1-0e01/ffff880165f57f40 start 0 [1/3 us]
[ 5.083915] usb 1-1.2: unlink qh1-0e01/ffff880165c112c0 start 0 [1/2 us]
[ 5.105712] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.105715] Bluetooth: BNEP filters: protocol multicast
[ 5.106075] Bluetooth: RFCOMM TTY layer initialized
[ 5.106079] Bluetooth: RFCOMM socket layer initialized
[ 5.106081] Bluetooth: RFCOMM ver 1.11
[ 5.107462] ehci_hcd 0000:00:1a.7: reused qh ffff880165cf74c0 schedule
[ 5.107466] usb 1-1.1.3: link qh1-0e01/ffff880165cf74c0 start 0 [1/2 us]
[ 5.271126] ieee80211 phy0: brcms_ops_config: change monitor mode: false (implement)
[ 5.272011] ieee80211 phy0: brcms_ops_config: change power-save mode: false (implement)
[ 5.285122] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: false (implement)
[ 5.286709] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.973837] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[ 6.263461] [drm] Initialized drm 1.1.0 20060810
--
keith.packard@intel.com
[-- Attachment #2: Type: application/pgp-signature, Size: 827 bytes --]
next prev parent reply other threads:[~2011-12-12 16:35 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-12 0:12 [PATCH] Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" Keith Packard
2011-12-12 2:59 ` Linus Torvalds
2011-12-12 3:01 ` H. Peter Anvin
2011-12-12 3:11 ` Ingo Molnar
2011-12-12 3:31 ` Keith Packard
2011-12-12 3:32 ` H. Peter Anvin
2011-12-12 3:43 ` Keith Packard
2011-12-12 10:01 ` Matt Fleming
2011-12-12 16:35 ` Keith Packard [this message]
2011-12-12 16:50 ` Linus Torvalds
2011-12-12 17:09 ` H. Peter Anvin
2011-12-12 17:21 ` Keith Packard
2011-12-12 17:29 ` H. Peter Anvin
2011-12-12 17:37 ` Linus Torvalds
2011-12-15 15:29 ` Matt Fleming
2012-01-16 9:22 ` Matt Fleming
2012-01-16 9:31 ` Ingo Molnar
2012-01-16 9:49 ` Matt Fleming
2012-01-16 9:55 ` Ingo Molnar
2012-01-16 10:16 ` Matt Fleming
2012-01-16 14:54 ` [tip:x86/efi] x86/efi: Delete efi_ioremap() and fix CONFIG_X86_32 oops tip-bot for Matt Fleming
2012-02-08 12:46 ` [PATCH] Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" Matt Fleming
2012-02-08 17:15 ` Keith Packard
2012-02-15 12:13 ` Matt Fleming
2012-02-17 11:21 ` Ingo Molnar
2011-12-12 10:01 ` Matt Fleming
2011-12-12 17:09 ` H. Peter Anvin
2011-12-12 17:26 ` Ingo Molnar
2011-12-12 3:06 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=86sjkpiw8i.fsf@sumi.keithp.com \
--to=keithp@keithp.com \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=huang.ying.caritas@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@console-pimps.org \
--cc=mingo@elte.hu \
--cc=mjg@redhat.com \
--cc=rui.zhang@intel.com \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.