All of lore.kernel.org
 help / color / mirror / Atom feed
* [Bluez-users] connecting linux laptop to a three-wire RS232 device via bluetooth
@ 2005-04-19  1:01 Russell Senior
  2005-04-19  1:09 ` Marcel Holtmann
  0 siblings, 1 reply; 3+ messages in thread
From: Russell Senior @ 2005-04-19  1:01 UTC (permalink / raw)
  To: bluez-users


I am looking for hardware recommendations for both ends of a bluetooth
link between a Linux (kernel v2.6.11) laptop and a serial DCE device
(9600 baud no-flow-control three-wire RS232).  I am assuming a USB
part (the laptop has a USB 1.x port) for the laptop and some kind of
serial-bluetooth converter for the device end.  We'll need to provide
battery power (it is a mobile application and won't have line power)
to the serial-bluetooth converter.

I'd like recommendations on both parts.  I think we'll need Class 1
devices for the range.

For the serial-bluetooth converter, we have looked at the: Brainboxes
BL-512; the Free2Move F2M01C1; the BRADATECH BlueSerial Adapter; and
the Digi Wavespeed/S (we found less information on this one).

The only lead I have on the USB side is that we probably want a CSR
chipset (??).  Can someone point me at some of those?

Thanks very much!



-- 
Russell Senior         ``I have nine fingers; you have ten.''
seniorr@aracnet.com


-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [Bluez-users] connecting linux laptop to a three-wire RS232 device via bluetooth
  2005-04-19  1:01 [Bluez-users] connecting linux laptop to a three-wire RS232 device via bluetooth Russell Senior
@ 2005-04-19  1:09 ` Marcel Holtmann
  2005-04-21 19:52   ` Russell Senior
  0 siblings, 1 reply; 3+ messages in thread
From: Marcel Holtmann @ 2005-04-19  1:09 UTC (permalink / raw)
  To: bluez-users

Hi Russell,

> I am looking for hardware recommendations for both ends of a bluetooth
> link between a Linux (kernel v2.6.11) laptop and a serial DCE device
> (9600 baud no-flow-control three-wire RS232).  I am assuming a USB
> part (the laptop has a USB 1.x port) for the laptop and some kind of
> serial-bluetooth converter for the device end.  We'll need to provide
> battery power (it is a mobile application and won't have line power)
> to the serial-bluetooth converter.
> 
> I'd like recommendations on both parts.  I think we'll need Class 1
> devices for the range.
> 
> For the serial-bluetooth converter, we have looked at the: Brainboxes
> BL-512; the Free2Move F2M01C1; the BRADATECH BlueSerial Adapter; and
> the Digi Wavespeed/S (we found less information on this one).
> 
> The only lead I have on the USB side is that we probably want a CSR
> chipset (??).  Can someone point me at some of those?

I didn't tested any Bluetooth-Serial converters, but for the laptop
equipment you should really get a CSR based USB dongle. You may simply
go with the D-Link DBT-120, because this is known to be upgradable to
the Bluetooth 1.2 standard.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [Bluez-users] connecting linux laptop to a three-wire RS232 device via bluetooth
  2005-04-19  1:09 ` Marcel Holtmann
@ 2005-04-21 19:52   ` Russell Senior
  0 siblings, 0 replies; 3+ messages in thread
From: Russell Senior @ 2005-04-21 19:52 UTC (permalink / raw)
  To: bluez-users

>>>>> "Marcel" == Marcel Holtmann <marcel@holtmann.org> writes:

Russell> I'd like recommendations on both parts.  I think we'll need
Russell> Class 1 devices for the range.

Marcel> [...] but for the laptop equipment you should really get a CSR
Marcel> based USB dongle. You may simply go with the D-Link DBT-120,
Marcel> because this is known to be upgradable to the Bluetooth 1.2
Marcel> standard.

Turns out (a couple just arrived) these are Class 2 devices.  Can you
point me at a Class 1 (100m) USB device?

BTW, how do the features hex decode on
<http://www.holtmann.org/linux/bluetooth/features.html>

Thanks!


-- 
Russell Senior         ``I have nine fingers; you have ten.''
seniorr@aracnet.com


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2005-04-21 19:52 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-19  1:01 [Bluez-users] connecting linux laptop to a three-wire RS232 device via bluetooth Russell Senior
2005-04-19  1:09 ` Marcel Holtmann
2005-04-21 19:52   ` Russell Senior

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.