From: Stefan Agner <stefan@agner.ch>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
linux-kernel@vger.kernel.org,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
Lucas Stach <dev@lynxeye.de>
Subject: Re: [PATCH v6 2/4] ARM: dts: tegra: Fix unit_address_vs_reg DTC warnings for /memory
Date: Wed, 23 May 2018 13:00:19 +0200 [thread overview]
Message-ID: <870361d2b9451af2e21cc570c8fca2c2@agner.ch> (raw)
In-Reply-To: <1527069406-6359-2-git-send-email-krzk@kernel.org>
On 23.05.2018 11:56, Krzysztof Kozlowski wrote:
> Add a generic /memory node in each Tegra DTSI (with empty reg property,
> to be overidden by each DTS) and set proper unit address for /memory
> nodes to fix the DTC warnings:
>
> arch/arm/boot/dts/tegra20-harmony.dtb: Warning (unit_address_vs_reg):
> /memory: node has a reg or ranges property, but no unit name
>
> The DTB after the change is the same as before except adding
> unit-address to /memory node.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
>
> ---
>
> Changes since v5:
> 1. Split with skeleton.dtsi removal (suggested by Stefan).
>
> Changes since v4:
> 1. None
> ---
> arch/arm/boot/dts/tegra114-dalmore.dts | 2 +-
> arch/arm/boot/dts/tegra114-roth.dts | 2 +-
> arch/arm/boot/dts/tegra114-tn7.dts | 2 +-
> arch/arm/boot/dts/tegra114.dtsi | 3 ++-
> arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi | 2 +-
> arch/arm/boot/dts/tegra124-apalis.dtsi | 2 +-
> arch/arm/boot/dts/tegra124-jetson-tk1.dts | 2 +-
> arch/arm/boot/dts/tegra124-nyan.dtsi | 2 +-
> arch/arm/boot/dts/tegra124-venice2.dts | 2 +-
> arch/arm/boot/dts/tegra124.dtsi | 3 ++-
> arch/arm/boot/dts/tegra20-colibri-512.dtsi | 2 +-
> arch/arm/boot/dts/tegra20-harmony.dts | 2 +-
> arch/arm/boot/dts/tegra20-paz00.dts | 2 +-
> arch/arm/boot/dts/tegra20-seaboard.dts | 2 +-
> arch/arm/boot/dts/tegra20-tamonten.dtsi | 2 +-
> arch/arm/boot/dts/tegra20-trimslice.dts | 2 +-
> arch/arm/boot/dts/tegra20-ventana.dts | 2 +-
> arch/arm/boot/dts/tegra20.dtsi | 3 ++-
> arch/arm/boot/dts/tegra30-apalis.dtsi | 4 ++--
> arch/arm/boot/dts/tegra30-beaver.dts | 2 +-
> arch/arm/boot/dts/tegra30-cardhu.dtsi | 2 +-
> arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +-
> arch/arm/boot/dts/tegra30.dtsi | 3 ++-
> 23 files changed, 28 insertions(+), 24 deletions(-)
>
> diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts
> b/arch/arm/boot/dts/tegra114-dalmore.dts
> index eafff16765b4..1788556b4977 100644
> --- a/arch/arm/boot/dts/tegra114-dalmore.dts
> +++ b/arch/arm/boot/dts/tegra114-dalmore.dts
> @@ -23,7 +23,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@80000000 {
> reg = <0x80000000 0x40000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra114-roth.dts
> b/arch/arm/boot/dts/tegra114-roth.dts
> index 7ed7370ee67a..3d3835591cd2 100644
> --- a/arch/arm/boot/dts/tegra114-roth.dts
> +++ b/arch/arm/boot/dts/tegra114-roth.dts
> @@ -28,7 +28,7 @@
> };
> };
>
> - memory {
> + memory@80000000 {
> /* memory >= 0x79600000 is reserved for firmware usage */
> reg = <0x80000000 0x79600000>;
> };
> diff --git a/arch/arm/boot/dts/tegra114-tn7.dts
> b/arch/arm/boot/dts/tegra114-tn7.dts
> index 7fc4a8b31e45..bfdd1bf61816 100644
> --- a/arch/arm/boot/dts/tegra114-tn7.dts
> +++ b/arch/arm/boot/dts/tegra114-tn7.dts
> @@ -28,7 +28,7 @@
> };
> };
>
> - memory {
> + memory@80000000 {
> /* memory >= 0x37e00000 is reserved for firmware usage */
> reg = <0x80000000 0x37e00000>;
> };
> diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
> index 27ef515e5640..aff4b8e115bc 100644
> --- a/arch/arm/boot/dts/tegra114.dtsi
> +++ b/arch/arm/boot/dts/tegra114.dtsi
> @@ -11,8 +11,9 @@
> #address-cells = <1>;
> #size-cells = <1>;
>
> - memory {
> + memory@80000000 {
> device_type = "memory";
> + reg = <0x80000000 0>;
Nit: I'd rather prefer
reg = <0x80000000 0x0>;
> };
>
> host1x@50000000 {
> diff --git a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
> b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
> index bb67edb016c5..6a7f45651d38 100644
> --- a/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
> +++ b/arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
> @@ -15,7 +15,7 @@
> compatible = "toradex,apalis-tk1-v1.2", "toradex,apalis-tk1",
> "nvidia,tegra124";
>
> - memory {
> + memory@0 {
> reg = <0x0 0x80000000 0x0 0x80000000>;
> };
Unit address combines all address cells, so this should be 80000000
here. See also the device tree spec (v0.2) which has an example in
chapter 3.4 /memory node.
So this should be:
memory@80000000 {
...
Same with all the board files below.
>
> diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi
> b/arch/arm/boot/dts/tegra124-apalis.dtsi
> index 65a2161b9b8e..e4625abd0a8a 100644
> --- a/arch/arm/boot/dts/tegra124-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
> @@ -50,7 +50,7 @@
> model = "Toradex Apalis TK1";
> compatible = "toradex,apalis-tk1", "nvidia,tegra124";
>
> - memory {
> + memory@0 {
> reg = <0x0 0x80000000 0x0 0x80000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> index 6dbcf84dafbc..e23b1159e8fd 100644
> --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
> @@ -24,7 +24,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x0 0x80000000 0x0 0x80000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi
> b/arch/arm/boot/dts/tegra124-nyan.dtsi
> index 3609367037a6..f45ac668d88c 100644
> --- a/arch/arm/boot/dts/tegra124-nyan.dtsi
> +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi
> @@ -13,7 +13,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x0 0x80000000 0x0 0x80000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra124-venice2.dts
> b/arch/arm/boot/dts/tegra124-venice2.dts
> index 89bcc178994d..44492b48e165 100644
> --- a/arch/arm/boot/dts/tegra124-venice2.dts
> +++ b/arch/arm/boot/dts/tegra124-venice2.dts
> @@ -18,7 +18,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x0 0x80000000 0x0 0x80000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
> index 951feea784af..ad9c9cd6fa8a 100644
> --- a/arch/arm/boot/dts/tegra124.dtsi
> +++ b/arch/arm/boot/dts/tegra124.dtsi
> @@ -13,8 +13,9 @@
> #address-cells = <2>;
> #size-cells = <2>;
>
> - memory {
> + memory@0 {
> device_type = "memory";
> + reg = <0 0>;
> };
This should have two address and two size cells I guess. And DDR for all
TK1 start at 0x0 0x80000000...
So here with a default length of 0:
memory@80000000 {
reg = <0x0 0x80000000 0x0 0x0>;
};
>
> pcie@1003000 {
> diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> index 5c202b3e3bb1..5623ff8d128c 100644
> --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> @@ -10,7 +10,7 @@
> rtc1 = "/rtc@7000e000";
> };
>
> - memory {
> + memory@0 {
> reg = <0x00000000 0x20000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra20-harmony.dts
> b/arch/arm/boot/dts/tegra20-harmony.dts
> index 628a55a9318b..1d96d92b72a7 100644
> --- a/arch/arm/boot/dts/tegra20-harmony.dts
> +++ b/arch/arm/boot/dts/tegra20-harmony.dts
> @@ -18,7 +18,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x00000000 0x40000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra20-paz00.dts
> b/arch/arm/boot/dts/tegra20-paz00.dts
> index 30436969adc0..ef245291924f 100644
> --- a/arch/arm/boot/dts/tegra20-paz00.dts
> +++ b/arch/arm/boot/dts/tegra20-paz00.dts
> @@ -19,7 +19,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x00000000 0x20000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts
> b/arch/arm/boot/dts/tegra20-seaboard.dts
> index 284aae351ff2..f91441683aad 100644
> --- a/arch/arm/boot/dts/tegra20-seaboard.dts
> +++ b/arch/arm/boot/dts/tegra20-seaboard.dts
> @@ -18,7 +18,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x00000000 0x40000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi
> b/arch/arm/boot/dts/tegra20-tamonten.dtsi
> index 872046d48709..20137fc578b1 100644
> --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
> +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
> @@ -15,7 +15,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x00000000 0x20000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts
> b/arch/arm/boot/dts/tegra20-trimslice.dts
> index d55c6b240a30..9eb26dc15f6b 100644
> --- a/arch/arm/boot/dts/tegra20-trimslice.dts
> +++ b/arch/arm/boot/dts/tegra20-trimslice.dts
> @@ -18,7 +18,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x00000000 0x40000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra20-ventana.dts
> b/arch/arm/boot/dts/tegra20-ventana.dts
> index ee3fbf941e79..f44551e2d9d0 100644
> --- a/arch/arm/boot/dts/tegra20-ventana.dts
> +++ b/arch/arm/boot/dts/tegra20-ventana.dts
> @@ -18,7 +18,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@0 {
> reg = <0x00000000 0x40000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
> index 88dd1afb5877..55581c0e5105 100644
> --- a/arch/arm/boot/dts/tegra20.dtsi
> +++ b/arch/arm/boot/dts/tegra20.dtsi
> @@ -13,8 +13,9 @@
> chosen { };
> aliases { };
>
> - memory {
> + memory@0 {
> device_type = "memory";
> + reg = <0 0>;
> };
>
> iram@40000000 {
> diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi
> b/arch/arm/boot/dts/tegra30-apalis.dtsi
> index 6f29cbad6e8a..9465fc592b7b 100644
> --- a/arch/arm/boot/dts/tegra30-apalis.dtsi
> +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
> @@ -10,8 +10,8 @@
> model = "Toradex Apalis T30";
> compatible = "toradex,apalis_t30", "nvidia,tegra30";
>
> - memory {
> - reg = <0 0>;
> + memory@80000000 {
> + reg = <0x80000000 0x40000000>;
> };
>
> pcie@3000 {
> diff --git a/arch/arm/boot/dts/tegra30-beaver.dts
> b/arch/arm/boot/dts/tegra30-beaver.dts
> index ae52a5039506..1434d50438f9 100644
> --- a/arch/arm/boot/dts/tegra30-beaver.dts
> +++ b/arch/arm/boot/dts/tegra30-beaver.dts
> @@ -17,7 +17,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@80000000 {
> reg = <0x80000000 0x7ff00000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi
> b/arch/arm/boot/dts/tegra30-cardhu.dtsi
> index 92a9740c533f..33b73dca16a3 100644
> --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
> +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
> @@ -40,7 +40,7 @@
> stdout-path = "serial0:115200n8";
> };
>
> - memory {
> + memory@80000000 {
> reg = <0x80000000 0x40000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi
> b/arch/arm/boot/dts/tegra30-colibri.dtsi
> index c44d8c40c410..9bf3327665d3 100644
> --- a/arch/arm/boot/dts/tegra30-colibri.dtsi
> +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
> @@ -10,7 +10,7 @@
> model = "Toradex Colibri T30";
> compatible = "toradex,colibri_t30", "nvidia,tegra30";
>
> - memory {
> + memory@80000000 {
> reg = <0x80000000 0x40000000>;
> };
>
> diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
> index 19237c08c166..2b6243b0c6d6 100644
> --- a/arch/arm/boot/dts/tegra30.dtsi
> +++ b/arch/arm/boot/dts/tegra30.dtsi
> @@ -14,8 +14,9 @@
> chosen { };
> aliases { };
>
> - memory {
> + memory@80000000 {
> device_type = "memory";
> + reg = <0x80000000 0>;
Nit: for consistency sake, 0x0 :-)
--
Stefan
> };
>
> pcie@3000 {
next prev parent reply other threads:[~2018-05-23 11:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 9:56 [PATCH v6 1/4] ARM: dts: tegra: Remove usage of deprecated skeleton.dtsi Krzysztof Kozlowski
2018-05-23 9:56 ` [PATCH v6 2/4] ARM: dts: tegra: Fix unit_address_vs_reg DTC warnings for /memory Krzysztof Kozlowski
2018-05-23 11:00 ` Stefan Agner [this message]
2018-05-23 11:27 ` Krzysztof Kozlowski
2018-05-23 9:56 ` [PATCH v6 3/4] ARM: dts: tegra: Fix unit_address_vs_reg and avoid_unnecessary_addr_size DTC warnings Krzysztof Kozlowski
2018-05-23 9:56 ` [PATCH v6 4/4] ARM: dts: tegra: Work safely with 256 MB Colibri-T20 modules Krzysztof Kozlowski
2018-05-23 11:35 ` Stefan Agner
2018-05-23 11:38 ` Krzysztof Kozlowski
2018-05-23 10:46 ` [PATCH v6 1/4] ARM: dts: tegra: Remove usage of deprecated skeleton.dtsi Stefan Agner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=870361d2b9451af2e21cc570c8fca2c2@agner.ch \
--to=stefan@agner.ch \
--cc=dev@lynxeye.de \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.