All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fabiano Rosas <farosas@suse.de>
To: Prasad Pandit <ppandit@redhat.com>, qemu-devel@nongnu.org
Cc: peterx@redhat.com, berrange@redhat.com,
	Prasad Pandit <pjp@fedoraproject.org>
Subject: Re: [PATCH v6 4/4] tests/qtest/migration: add postcopy tests with multifd
Date: Mon, 17 Feb 2025 12:33:02 -0300	[thread overview]
Message-ID: <871pvwvb69.fsf@suse.de> (raw)
In-Reply-To: <20250215123119.814345-5-ppandit@redhat.com>

Prasad Pandit <ppandit@redhat.com> writes:

> From: Prasad Pandit <pjp@fedoraproject.org>
>
> Add new qtests to run postcopy migration with multifd
> channels enabled.
>
> Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
> ---
>  tests/qtest/migration/compression-tests.c | 13 ++++++++
>  tests/qtest/migration/framework.c         |  4 +++
>  tests/qtest/migration/postcopy-tests.c    | 23 +++++++++++++
>  tests/qtest/migration/precopy-tests.c     | 19 +++++++++++
>  tests/qtest/migration/tls-tests.c         | 40 +++++++++++++++++++++++
>  5 files changed, 99 insertions(+)
>
> v6:
> - Reorder, make this the second patch in this series.
>
> v5:
> - https://lore.kernel.org/qemu-devel/20250205122712.229151-1-ppandit@redhat.com/T/#t
>
> diff --git a/tests/qtest/migration/compression-tests.c b/tests/qtest/migration/compression-tests.c
> index 4558a7b9ff..d4d6b3c4de 100644
> --- a/tests/qtest/migration/compression-tests.c
> +++ b/tests/qtest/migration/compression-tests.c
> @@ -40,6 +40,17 @@ static void test_multifd_tcp_zstd(void)
>      };
>      test_precopy_common(&args);
>  }
> +
> +static void test_multifd_postcopy_tcp_zstd(void)
> +{
> +    MigrateCommon args = {
> +        .listen_uri = "defer",
> +        .caps[MIGRATION_CAPABILITY_POSTCOPY_RAM] = true,
> +        .start_hook = migrate_hook_start_precopy_tcp_multifd_zstd,
> +    };
> +
> +    test_precopy_common(&args);
> +}
>  #endif /* CONFIG_ZSTD */
>  
>  #ifdef CONFIG_QATZIP
> @@ -172,6 +183,8 @@ void migration_test_add_compression(MigrationTestEnv *env)
>  #ifdef CONFIG_ZSTD
>      migration_test_add("/migration/multifd/tcp/plain/zstd",
>                         test_multifd_tcp_zstd);
> +    migration_test_add("/migration/multifd+postcopy/tcp/plain/zstd",
> +                       test_multifd_postcopy_tcp_zstd);
>  #endif
>  
>  #ifdef CONFIG_QATZIP
> diff --git a/tests/qtest/migration/framework.c b/tests/qtest/migration/framework.c
> index 82aaa13e85..2396405b51 100644
> --- a/tests/qtest/migration/framework.c
> +++ b/tests/qtest/migration/framework.c
> @@ -469,6 +469,10 @@ static int migrate_postcopy_prepare(QTestState **from_ptr,
>      args->caps[MIGRATION_CAPABILITY_POSTCOPY_BLOCKTIME] = true;
>      args->caps[MIGRATION_CAPABILITY_POSTCOPY_RAM] = true;
>      set_migration_capabilities(from, to, args);
> +    if (args->caps[MIGRATION_CAPABILITY_MULTIFD]) {
> +        migrate_set_parameter_int(from, "multifd-channels", 8);
> +        migrate_set_parameter_int(to, "multifd-channels", 8);
> +    }
>  
>      migrate_ensure_non_converge(from);
>      migrate_prepare_for_dirty_mem(from);
> diff --git a/tests/qtest/migration/postcopy-tests.c b/tests/qtest/migration/postcopy-tests.c
> index b0e70a6367..32fe7b0324 100644
> --- a/tests/qtest/migration/postcopy-tests.c
> +++ b/tests/qtest/migration/postcopy-tests.c
> @@ -90,6 +90,25 @@ static void migration_test_add_postcopy_smoke(MigrationTestEnv *env)
>      }
>  }
>  
> +static void test_multifd_postcopy(void)
> +{
> +    MigrateCommon args = {
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +    };
> +
> +    test_postcopy_common(&args);
> +}
> +
> +static void test_multifd_postcopy_preempt(void)
> +{
> +    MigrateCommon args = {
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +        .caps[MIGRATION_CAPABILITY_POSTCOPY_PREEMPT] = true,
> +    };
> +
> +    test_postcopy_common(&args);
> +}
> +
>  void migration_test_add_postcopy(MigrationTestEnv *env)
>  {
>      migration_test_add_postcopy_smoke(env);
> @@ -110,6 +129,10 @@ void migration_test_add_postcopy(MigrationTestEnv *env)
>              "/migration/postcopy/recovery/double-failures/reconnect",
>              test_postcopy_recovery_fail_reconnect);
>  
> +        migration_test_add("/migration/multifd+postcopy/plain",
> +                           test_multifd_postcopy);
> +        migration_test_add("/migration/multifd+postcopy/preempt/plain",
> +                           test_multifd_postcopy_preempt);

For postcopy-tests.c I'd use /migration/postcopy/multifd so we can run
them all via command-line. These are also the only ones actually doing
postcopy migration. We need to distinguish multifd+postcopy proper from
merely postcopy-ram=true.

>          if (env->is_x86) {
>              migration_test_add("/migration/postcopy/suspend",
>                                 test_postcopy_suspend);
> diff --git a/tests/qtest/migration/precopy-tests.c b/tests/qtest/migration/precopy-tests.c
> index e5d8c49dbe..2126cb8e2c 100644
> --- a/tests/qtest/migration/precopy-tests.c
> +++ b/tests/qtest/migration/precopy-tests.c
> @@ -33,6 +33,7 @@
>  #define DIRTYLIMIT_TOLERANCE_RANGE  25  /* MB/s */
>  
>  static char *tmpfs;
> +static bool postcopy_ram = false;
>  
>  static void test_precopy_unix_plain(void)
>  {
> @@ -465,6 +466,11 @@ static void test_multifd_tcp_cancel(void)
>      migrate_ensure_non_converge(from);
>      migrate_prepare_for_dirty_mem(from);
>  
> +    if (postcopy_ram) {
> +        migrate_set_capability(from, "postcopy-ram", true);
> +        migrate_set_capability(to, "postcopy-ram", true);
> +    }
> +
>      migrate_set_parameter_int(from, "multifd-channels", 16);
>      migrate_set_parameter_int(to, "multifd-channels", 16);
>  
> @@ -506,6 +512,10 @@ static void test_multifd_tcp_cancel(void)
>          return;
>      }
>  
> +    if (postcopy_ram) {
> +        migrate_set_capability(to2, "postcopy-ram", true);
> +    }
> +
>      migrate_set_parameter_int(to2, "multifd-channels", 16);
>  
>      migrate_set_capability(to2, "multifd", true);
> @@ -529,6 +539,13 @@ static void test_multifd_tcp_cancel(void)
>      migrate_end(from, to2, true);
>  }
>  
> +static void test_multifd_postcopy_tcp_cancel(void)
> +{
> +    postcopy_ram = true;
> +    test_multifd_tcp_cancel();
> +    postcopy_ram = false;

You could pass this in, there's just one other caller.

> +}
> +
>  static void calc_dirty_rate(QTestState *who, uint64_t calc_time)
>  {
>      qtest_qmp_assert_success(who,
> @@ -1001,6 +1018,8 @@ void migration_test_add_precopy(MigrationTestEnv *env)
>                         test_multifd_tcp_zero_page_legacy);
>      migration_test_add("/migration/multifd/tcp/plain/zero-page/none",
>                         test_multifd_tcp_no_zero_page);
> +    migration_test_add("migration/multifd+postcopy/tcp/plain/cancel",
> +                       test_multifd_postcopy_tcp_cancel);
>      if (g_str_equal(env->arch, "x86_64")
>          && env->has_kvm && env->has_dirty_ring) {
>  
> diff --git a/tests/qtest/migration/tls-tests.c b/tests/qtest/migration/tls-tests.c
> index 30ab79e058..ce57f0cb5d 100644
> --- a/tests/qtest/migration/tls-tests.c
> +++ b/tests/qtest/migration/tls-tests.c
> @@ -393,6 +393,17 @@ static void test_postcopy_recovery_tls_psk(void)
>      test_postcopy_recovery_common(&args);
>  }
>  
> +static void test_multifd_postcopy_recovery_tls_psk(void)
> +{
> +    MigrateCommon args = {
> +        .start_hook = migrate_hook_start_tls_psk_match,
> +        .end_hook = migrate_hook_end_tls_psk,
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +    };
> +
> +    test_postcopy_recovery_common(&args);
> +}
> +
>  /* This contains preempt+recovery+tls test altogether */
>  static void test_postcopy_preempt_all(void)
>  {
> @@ -405,6 +416,17 @@ static void test_postcopy_preempt_all(void)
>      test_postcopy_recovery_common(&args);
>  }
>  
> +static void test_multifd_postcopy_preempt_recovery_tls_psk(void)
> +{
> +    MigrateCommon args = {
> +        .start_hook = migrate_hook_start_tls_psk_match,
> +        .end_hook = migrate_hook_end_tls_psk,
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +    };
> +
> +    test_postcopy_recovery_common(&args);
> +}
> +
>  static void test_precopy_unix_tls_psk(void)
>  {
>      g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
> @@ -651,6 +673,18 @@ static void test_multifd_tcp_tls_psk_mismatch(void)
>      test_precopy_common(&args);
>  }
>  
> +static void test_multifd_postcopy_tcp_tls_psk_match(void)
> +{
> +    MigrateCommon args = {
> +        .listen_uri = "defer",
> +        .caps[MIGRATION_CAPABILITY_MULTIFD] = true,
> +        .start_hook = migrate_hook_start_multifd_tcp_tls_psk_match,
> +        .end_hook = migrate_hook_end_tls_psk,
> +    };
> +
> +    test_precopy_common(&args);
> +}
> +
>  #ifdef CONFIG_TASN1
>  static void test_multifd_tcp_tls_x509_default_host(void)
>  {
> @@ -762,6 +796,10 @@ void migration_test_add_tls(MigrationTestEnv *env)
>                             test_postcopy_preempt_tls_psk);
>          migration_test_add("/migration/postcopy/preempt/recovery/tls/psk",
>                             test_postcopy_preempt_all);
> +        migration_test_add("/migration/multifd+postcopy/recovery/tls/psk",
> +                           test_multifd_postcopy_recovery_tls_psk);
> +        migration_test_add("/migration/multifd+postcopy/preempt/recovery/tls/psk",
> +                           test_multifd_postcopy_preempt_recovery_tls_psk);
>      }
>  #ifdef CONFIG_TASN1
>      migration_test_add("/migration/precopy/unix/tls/x509/default-host",
> @@ -793,6 +831,8 @@ void migration_test_add_tls(MigrationTestEnv *env)
>                         test_multifd_tcp_tls_psk_match);
>      migration_test_add("/migration/multifd/tcp/tls/psk/mismatch",
>                         test_multifd_tcp_tls_psk_mismatch);
> +    migration_test_add("/migration/multifd+postcopy/tcp/tls/psk/match",
> +                       test_multifd_postcopy_tcp_tls_psk_match);
>  #ifdef CONFIG_TASN1
>      migration_test_add("/migration/multifd/tcp/tls/x509/default-host",
>                         test_multifd_tcp_tls_x509_default_host);
> --
> 2.48.1


  reply	other threads:[~2025-02-17 15:34 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-15 12:31 [PATCH v6 0/4] Allow to enable multifd and postcopy migration together Prasad Pandit
2025-02-15 12:31 ` [PATCH v6 1/4] migration/multifd: move macros to multifd header Prasad Pandit
2025-02-15 12:31 ` [PATCH v6 2/4] migration: enable multifd and postcopy together Prasad Pandit
2025-02-17 21:49   ` Fabiano Rosas
2025-02-18  8:17     ` Prasad Pandit
2025-02-18 14:22       ` Fabiano Rosas
2025-02-19 11:57         ` Prasad Pandit
2025-02-19 17:22           ` Fabiano Rosas
2025-02-20  9:47             ` Prasad Pandit
2025-02-20 13:36               ` Fabiano Rosas
2025-02-21  8:44                 ` Prasad Pandit
2025-02-18 11:17   ` Juraj Marcin
2025-02-19  7:13     ` Prasad Pandit
2025-02-15 12:31 ` [PATCH v6 3/4] tests/qtest/migration: consolidate set capabilities Prasad Pandit
2025-02-17 15:17   ` Fabiano Rosas
2025-02-18  8:53     ` Prasad Pandit
2025-02-15 12:31 ` [PATCH v6 4/4] tests/qtest/migration: add postcopy tests with multifd Prasad Pandit
2025-02-17 15:33   ` Fabiano Rosas [this message]
2025-02-18  8:58     ` Prasad Pandit
2025-02-18 14:28       ` Fabiano Rosas
2025-02-25  7:25         ` Prasad Pandit
2025-02-25 13:07           ` Fabiano Rosas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=871pvwvb69.fsf@suse.de \
    --to=farosas@suse.de \
    --cc=berrange@redhat.com \
    --cc=peterx@redhat.com \
    --cc=pjp@fedoraproject.org \
    --cc=ppandit@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.