Re: [Intel-gfx] [PATCH v2] drm/i915/display: Don't disable DDI/Transcoder when setting phy test pattern

[Jani Nikula <jani.nikula@linux.intel.com>]

On Fri, 16 Sep 2022, Khaled Almahallawy <khaled.almahallawy@intel.com> wrote:
> Bspecs has updated recently to remove the restriction to disable
> DDI/Transcoder before setting PHY test pattern. This update is to
> address PHY compliance test failures observed on a port with LTTPR.
> The issue is that when Transc. is disabled, the main link signals fed
> to LTTPR will be dropped invalidating link training, which will affect
> the quality of the phy test pattern when the transcoder is enabled again.

And how about platforms prior to display 12? The requirement is still
there AFAICT.

BR,
Jani.


>
> v2: Update commit message (Clint)
>
> Bspec: 50482
> Cc: Imre Deak <imre.deak@intel.com>
> Cc: Clint Taylor <clinton.a.taylor@intel.com>
> Cc: Or Cochvi <or.cochvi@intel.com>
> Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c | 59 -------------------------
>  1 file changed, 59 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c9be61d2348e..2bf323f3f155 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -3675,61 +3675,6 @@ static void intel_dp_phy_pattern_update(struct intel_dp *intel_dp,
>  	}
>  }
>  
> -static void
> -intel_dp_autotest_phy_ddi_disable(struct intel_dp *intel_dp,
> -				  const struct intel_crtc_state *crtc_state)
> -{
> -	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> -	struct drm_device *dev = dig_port->base.base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> -	struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
> -	enum pipe pipe = crtc->pipe;
> -	u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
> -
> -	trans_ddi_func_ctl_value = intel_de_read(dev_priv,
> -						 TRANS_DDI_FUNC_CTL(pipe));
> -	trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
> -	dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
> -
> -	trans_ddi_func_ctl_value &= ~(TRANS_DDI_FUNC_ENABLE |
> -				      TGL_TRANS_DDI_PORT_MASK);
> -	trans_conf_value &= ~PIPECONF_ENABLE;
> -	dp_tp_ctl_value &= ~DP_TP_CTL_ENABLE;
> -
> -	intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
> -	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
> -		       trans_ddi_func_ctl_value);
> -	intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
> -}
> -
> -static void
> -intel_dp_autotest_phy_ddi_enable(struct intel_dp *intel_dp,
> -				 const struct intel_crtc_state *crtc_state)
> -{
> -	struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
> -	struct drm_device *dev = dig_port->base.base.dev;
> -	struct drm_i915_private *dev_priv = to_i915(dev);
> -	enum port port = dig_port->base.port;
> -	struct intel_crtc *crtc = to_intel_crtc(dig_port->base.base.crtc);
> -	enum pipe pipe = crtc->pipe;
> -	u32 trans_ddi_func_ctl_value, trans_conf_value, dp_tp_ctl_value;
> -
> -	trans_ddi_func_ctl_value = intel_de_read(dev_priv,
> -						 TRANS_DDI_FUNC_CTL(pipe));
> -	trans_conf_value = intel_de_read(dev_priv, PIPECONF(pipe));
> -	dp_tp_ctl_value = intel_de_read(dev_priv, TGL_DP_TP_CTL(pipe));
> -
> -	trans_ddi_func_ctl_value |= TRANS_DDI_FUNC_ENABLE |
> -				    TGL_TRANS_DDI_SELECT_PORT(port);
> -	trans_conf_value |= PIPECONF_ENABLE;
> -	dp_tp_ctl_value |= DP_TP_CTL_ENABLE;
> -
> -	intel_de_write(dev_priv, PIPECONF(pipe), trans_conf_value);
> -	intel_de_write(dev_priv, TGL_DP_TP_CTL(pipe), dp_tp_ctl_value);
> -	intel_de_write(dev_priv, TRANS_DDI_FUNC_CTL(pipe),
> -		       trans_ddi_func_ctl_value);
> -}
> -
>  static void intel_dp_process_phy_request(struct intel_dp *intel_dp,
>  					 const struct intel_crtc_state *crtc_state)
>  {
> @@ -3748,14 +3693,10 @@ static void intel_dp_process_phy_request(struct intel_dp *intel_dp,
>  	intel_dp_get_adjust_train(intel_dp, crtc_state, DP_PHY_DPRX,
>  				  link_status);
>  
> -	intel_dp_autotest_phy_ddi_disable(intel_dp, crtc_state);
> -
>  	intel_dp_set_signal_levels(intel_dp, crtc_state, DP_PHY_DPRX);
>  
>  	intel_dp_phy_pattern_update(intel_dp, crtc_state);
>  
> -	intel_dp_autotest_phy_ddi_enable(intel_dp, crtc_state);
> -
>  	drm_dp_dpcd_write(&intel_dp->aux, DP_TRAINING_LANE0_SET,
>  			  intel_dp->train_set, crtc_state->lane_count);

-- 
Jani Nikula, Intel Open Source Graphics Center