All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitaly Kuznetsov <vkuznets@redhat.com>
To: Sean Christopherson <sean.j.christopherson@intel.com>,
	Paolo Bonzini <pbonzini@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>,
	Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>,
	kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
	Ben Gardon <bgardon@google.com>,
	Junaid Shahid <junaids@google.com>,
	Liran Alon <liran.alon@oracle.com>,
	Boris Ostrovsky <boris.ostrovsky@oracle.com>,
	John Haxby <john.haxby@oracle.com>,
	Miaohe Lin <linmiaohe@huawei.com>,
	Tom Lendacky <thomas.lendacky@amd.com>
Subject: Re: [PATCH v3 02/37] KVM: nVMX: Validate the EPTP when emulating INVEPT(EXTENT_CONTEXT)
Date: Mon, 23 Mar 2020 15:51:17 +0100	[thread overview]
Message-ID: <871rpj9lay.fsf@vitty.brq.redhat.com> (raw)
In-Reply-To: <20200320212833.3507-3-sean.j.christopherson@intel.com>

Sean Christopherson <sean.j.christopherson@intel.com> writes:

> Signal VM-Fail for the single-context variant of INVEPT if the specified
> EPTP is invalid.  Per the INEVPT pseudocode in Intel's SDM, it's subject
> to the standard EPT checks:
>
>   If VM entry with the "enable EPT" VM execution control set to 1 would
>   fail due to the EPTP value then VMfail(Invalid operand to INVEPT/INVVPID);
>
> Fixes: bfd0a56b90005 ("nEPT: Nested INVEPT")
> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
> ---
>  arch/x86/kvm/vmx/nested.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
> index 8578513907d7..f3774cef4fd4 100644
> --- a/arch/x86/kvm/vmx/nested.c
> +++ b/arch/x86/kvm/vmx/nested.c
> @@ -5156,8 +5156,12 @@ static int handle_invept(struct kvm_vcpu *vcpu)
>  	}
>  
>  	switch (type) {
> -	case VMX_EPT_EXTENT_GLOBAL:
>  	case VMX_EPT_EXTENT_CONTEXT:
> +		if (!nested_vmx_check_eptp(vcpu, operand.eptp))
> +			return nested_vmx_failValid(vcpu,
> +				VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID);

I was going to ask "and we don't seem to check that current nested VMPTR
is valid, how can we know that nested_vmx_failValid() is the right
VMfail() to use" but then I checked our nested_vmx_failValid() and there
is a fallback there:

	if (vmx->nested.current_vmptr == -1ull && !vmx->nested.hv_evmcs)
		return nested_vmx_failInvalid(vcpu);

so this is a non-issue. My question, however, transforms into "would it
make sense to introduce nested_vmx_fail() implementing the logic from
SDM:

VMfail(ErrorNumber):
	IF VMCS pointer is valid
		THEN VMfailValid(ErrorNumber);
	ELSE VMfailInvalid;
	FI;

to assist an innocent reader of the code?"

> +		fallthrough;
> +	case VMX_EPT_EXTENT_GLOBAL:
>  	/*
>  	 * TODO: Sync the necessary shadow EPT roots here, rather than
>  	 * at the next emulated VM-entry.

Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>

-- 
Vitaly


  reply	other threads:[~2020-03-23 14:51 UTC|newest]

Thread overview: 83+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-20 21:27 [PATCH v3 00/37] KVM: x86: TLB flushing fixes and enhancements Sean Christopherson
2020-03-20 21:27 ` [PATCH v3 01/37] KVM: VMX: Flush all EPTP/VPID contexts on remote TLB flush Sean Christopherson
2021-08-03  1:45   ` Lai Jiangshan
2021-08-03 15:39     ` Sean Christopherson
2021-08-04  3:11       ` Lai Jiangshan
2021-08-04 15:33         ` Sean Christopherson
2020-03-20 21:27 ` [PATCH v3 02/37] KVM: nVMX: Validate the EPTP when emulating INVEPT(EXTENT_CONTEXT) Sean Christopherson
2020-03-23 14:51   ` Vitaly Kuznetsov [this message]
2020-03-23 15:45     ` Sean Christopherson
2020-03-23 23:46       ` Paolo Bonzini
2020-03-20 21:27 ` [PATCH v3 03/37] KVM: nVMX: Invalidate all EPTP contexts when emulating INVEPT for L1 Sean Christopherson
2020-03-23 15:24   ` Vitaly Kuznetsov
2020-03-23 15:53     ` Sean Christopherson
2020-03-23 16:24   ` Jim Mattson
2020-03-23 16:28     ` Sean Christopherson
2020-03-23 16:36       ` Jim Mattson
2020-03-23 16:44         ` Sean Christopherson
2020-03-23 23:50           ` Paolo Bonzini
2020-03-24  0:12             ` Jim Mattson
2020-03-30 18:38               ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 04/37] KVM: nVMX: Invalidate all roots when emulating INVVPID without EPT Sean Christopherson
2020-03-23 15:34   ` Vitaly Kuznetsov
2020-03-23 16:04     ` Sean Christopherson
2020-03-23 16:33       ` Vitaly Kuznetsov
2020-03-23 16:50         ` Sean Christopherson
2020-03-23 16:57           ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 05/37] KVM: x86: Export kvm_propagate_fault() (as kvm_inject_emulated_page_fault) Sean Christopherson
2020-03-23 15:47   ` Vitaly Kuznetsov
2020-03-23 16:24     ` Sean Christopherson
2020-03-23 23:56       ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 06/37] KVM: x86: Consolidate logic for injecting page faults to L1 Sean Christopherson
2020-03-24  0:47   ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 07/37] KVM: x86: Sync SPTEs when injecting page/EPT fault into L1 Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 08/37] KVM: VMX: Skip global INVVPID fallback if vpid==0 in vpid_sync_context() Sean Christopherson
2020-03-25  9:33   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 09/37] KVM: VMX: Use vpid_sync_context() directly when possible Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 10/37] KVM: VMX: Move vpid_sync_vcpu_addr() down a few lines Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 11/37] KVM: VMX: Handle INVVPID fallback logic in vpid_sync_vcpu_addr() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 12/37] KVM: VMX: Drop redundant capability checks in low level INVVPID helpers Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 13/37] KVM: nVMX: Use vpid_sync_vcpu_addr() to emulate INVVPID with address Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 14/37] KVM: x86: Move "flush guest's TLB" logic to separate kvm_x86_ops hook Sean Christopherson
2020-03-25 10:23   ` Vitaly Kuznetsov
2020-03-25 15:41     ` Paolo Bonzini
2020-03-25 16:08       ` Vitaly Kuznetsov
2020-03-25 15:48     ` Sean Christopherson
2020-03-25 16:11       ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 15/37] KVM: VMX: Clean up vmx_flush_tlb_gva() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 16/37] KVM: x86: Drop @invalidate_gpa param from kvm_x86_ops' tlb_flush() Sean Christopherson
2020-03-25 11:23   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 17/37] KVM: SVM: Wire up ->tlb_flush_guest() directly to svm_flush_tlb() Sean Christopherson
2020-03-25 11:23   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 18/37] KVM: VMX: Move vmx_flush_tlb() to vmx.c Sean Christopherson
2020-03-25 11:25   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 19/37] KVM: nVMX: Move nested_get_vpid02() to vmx/nested.h Sean Christopherson
2020-03-25 11:25   ` Vitaly Kuznetsov
2020-03-20 21:28 ` [PATCH v3 20/37] KVM: VMX: Introduce vmx_flush_tlb_current() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 21/37] KVM: SVM: Document the ASID logic in svm_flush_tlb() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 22/37] KVM: x86: Rename ->tlb_flush() to ->tlb_flush_all() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 23/37] KVM: nVMX: Add helper to handle TLB flushes on nested VM-Enter/VM-Exit Sean Christopherson
2021-10-28 13:11   ` Lai Jiangshan
2021-10-28 15:22     ` Sean Christopherson
2021-10-29  0:44       ` Lai Jiangshan
2021-10-29 17:10         ` Sean Christopherson
2021-10-30  1:34           ` Lai Jiangshan
2021-11-04 17:47             ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 24/37] KVM: x86: Introduce KVM_REQ_TLB_FLUSH_CURRENT to flush current ASID Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 25/37] KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 26/37] KVM: nVMX: Selectively use TLB_FLUSH_CURRENT for nested VM-Enter/VM-Exit Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 27/37] KVM: nVMX: Reload APIC access page on nested VM-Exit only if necessary Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 28/37] KVM: VMX: Retrieve APIC access page HPA only when necessary Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 29/37] KVM: VMX: Don't reload APIC access page if its control is disabled Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 30/37] KVM: x86/mmu: Move fast_cr3_switch() side effects to __kvm_mmu_new_cr3() Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 31/37] KVM: x86/mmu: Add separate override for MMU sync during fast CR3 switch Sean Christopherson
2020-03-24 11:07   ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 32/37] KVM: x86/mmu: Add module param to force TLB flush on root reuse Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 33/37] KVM: nVMX: Skip MMU sync on nested VMX transition when possible Sean Christopherson
2020-03-24 11:19   ` Paolo Bonzini
2020-03-20 21:28 ` [PATCH v3 34/37] KVM: nVMX: Don't flush TLB on nested VMX transition Sean Christopherson
2020-03-24 11:20   ` Paolo Bonzini
2020-03-24 18:10     ` Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 35/37] KVM: nVMX: Free only the affected contexts when emulating INVEPT Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 36/37] KVM: x86: Replace "cr3" with "pgd" in "new cr3/pgd" related code Sean Christopherson
2020-03-20 21:28 ` [PATCH v3 37/37] KVM: VMX: Clean cr3/pgd handling in vmx_load_mmu_pgd() Sean Christopherson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=871rpj9lay.fsf@vitty.brq.redhat.com \
    --to=vkuznets@redhat.com \
    --cc=bgardon@google.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=jmattson@google.com \
    --cc=john.haxby@oracle.com \
    --cc=joro@8bytes.org \
    --cc=junaids@google.com \
    --cc=kvm@vger.kernel.org \
    --cc=linmiaohe@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=liran.alon@oracle.com \
    --cc=pbonzini@redhat.com \
    --cc=sean.j.christopherson@intel.com \
    --cc=thomas.lendacky@amd.com \
    --cc=wanpengli@tencent.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.