From: Kevin Hilman <khilman@deeprootsystems.com>
To: m-karicheri2@ti.com
Cc: linux-media@vger.kernel.org, hverkuil@xs4all.nl,
davinci-linux-open-source@linux.davincidsp.com
Subject: Re: [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver
Date: Tue, 05 Jan 2010 15:28:02 -0800 [thread overview]
Message-ID: <871vi4rv25.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1260895054-13232-1-git-send-email-m-karicheri2@ti.com> (m-karicheri2@ti.com's message of "Tue\, 15 Dec 2009 11\:37\:31 -0500")
m-karicheri2@ti.com writes:
> From: Muralidharan Karicheri <m-karicheri2@ti.com>
>
> This combines the two patches sent earlier to change the clock configuration
> and converting ccdc drivers to platform drivers. This has updated comments
> against v2 of these patches. Two new clocks "master" and "slave" are defined for ccdc driver
> as per comments from Kevin Hilman.
>
> This adds platform code for ccdc driver on DM355 and DM6446.
>
> Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com>
> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com>
>
> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
> ---
> Applies to linux-davinci tree
> arch/arm/mach-davinci/dm355.c | 41 ++++++++++++++++++++++++++++-----------
> arch/arm/mach-davinci/dm644x.c | 20 ++++++++++++++++++-
> 2 files changed, 48 insertions(+), 13 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
> index 2244e8c..a9ea761 100644
> --- a/arch/arm/mach-davinci/dm355.c
> +++ b/arch/arm/mach-davinci/dm355.c
> @@ -378,6 +378,8 @@ static struct davinci_clk dm355_clks[] = {
> CLK(NULL, "timer3", &timer3_clk),
> CLK(NULL, "rto", &rto_clk),
> CLK(NULL, "usb", &usb_clk),
> + CLK("dm355_ccdc", "master", &vpss_master_clk),
> + CLK("dm355_ccdc", "slave", &vpss_slave_clk),
I still don't understand why you have to add new entries here and
can't simply rename the existing CLK nodes using vpss_*_clk.
Same comment for dm644x.c changes.
Kevin
> CLK(NULL, NULL, NULL),
> };
>
> @@ -665,6 +667,17 @@ static struct platform_device dm355_asp1_device = {
> .resource = dm355_asp1_resources,
> };
>
> +static void dm355_ccdc_setup_pinmux(void)
> +{
> + davinci_cfg_reg(DM355_VIN_PCLK);
> + davinci_cfg_reg(DM355_VIN_CAM_WEN);
> + davinci_cfg_reg(DM355_VIN_CAM_VD);
> + davinci_cfg_reg(DM355_VIN_CAM_HD);
> + davinci_cfg_reg(DM355_VIN_YIN_EN);
> + davinci_cfg_reg(DM355_VIN_CINL_EN);
> + davinci_cfg_reg(DM355_VIN_CINH_EN);
> +}
> +
> static struct resource dm355_vpss_resources[] = {
> {
> /* VPSS BL Base address */
> @@ -701,6 +714,10 @@ static struct resource vpfe_resources[] = {
> .end = IRQ_VDINT1,
> .flags = IORESOURCE_IRQ,
> },
> +};
> +
> +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
> +static struct resource dm355_ccdc_resource[] = {
> /* CCDC Base address */
> {
> .flags = IORESOURCE_MEM,
> @@ -708,8 +725,18 @@ static struct resource vpfe_resources[] = {
> .end = 0x01c70600 + 0x1ff,
> },
> };
> +static struct platform_device dm355_ccdc_dev = {
> + .name = "dm355_ccdc",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(dm355_ccdc_resource),
> + .resource = dm355_ccdc_resource,
> + .dev = {
> + .dma_mask = &vpfe_capture_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + .platform_data = dm355_ccdc_setup_pinmux,
> + },
> +};
>
> -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
> static struct platform_device vpfe_capture_dev = {
> .name = CAPTURE_DRV_NAME,
> .id = -1,
> @@ -860,17 +887,7 @@ static int __init dm355_init_devices(void)
> davinci_cfg_reg(DM355_INT_EDMA_CC);
> platform_device_register(&dm355_edma_device);
> platform_device_register(&dm355_vpss_device);
> - /*
> - * setup Mux configuration for vpfe input and register
> - * vpfe capture platform device
> - */
> - davinci_cfg_reg(DM355_VIN_PCLK);
> - davinci_cfg_reg(DM355_VIN_CAM_WEN);
> - davinci_cfg_reg(DM355_VIN_CAM_VD);
> - davinci_cfg_reg(DM355_VIN_CAM_HD);
> - davinci_cfg_reg(DM355_VIN_YIN_EN);
> - davinci_cfg_reg(DM355_VIN_CINL_EN);
> - davinci_cfg_reg(DM355_VIN_CINH_EN);
> + platform_device_register(&dm355_ccdc_dev);
> platform_device_register(&vpfe_capture_dev);
>
> return 0;
> diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
> index e65e29e..e5f1ee9 100644
> --- a/arch/arm/mach-davinci/dm644x.c
> +++ b/arch/arm/mach-davinci/dm644x.c
> @@ -315,6 +315,8 @@ struct davinci_clk dm644x_clks[] = {
> CLK(NULL, "timer0", &timer0_clk),
> CLK(NULL, "timer1", &timer1_clk),
> CLK("watchdog", NULL, &timer2_clk),
> + CLK("dm644x_ccdc", "master", &vpss_master_clk),
> + CLK("dm644x_ccdc", "slave", &vpss_slave_clk),
> CLK(NULL, NULL, NULL),
> };
>
> @@ -612,6 +614,11 @@ static struct resource vpfe_resources[] = {
> .end = IRQ_VDINT1,
> .flags = IORESOURCE_IRQ,
> },
> +};
> +
> +static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
> +static struct resource dm644x_ccdc_resource[] = {
> + /* CCDC Base address */
> {
> .start = 0x01c70400,
> .end = 0x01c70400 + 0xff,
> @@ -619,7 +626,17 @@ static struct resource vpfe_resources[] = {
> },
> };
>
> -static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
> +static struct platform_device dm644x_ccdc_dev = {
> + .name = "dm644x_ccdc",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(dm644x_ccdc_resource),
> + .resource = dm644x_ccdc_resource,
> + .dev = {
> + .dma_mask = &vpfe_capture_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> + },
> +};
> +
> static struct platform_device vpfe_capture_dev = {
> .name = CAPTURE_DRV_NAME,
> .id = -1,
> @@ -772,6 +789,7 @@ static int __init dm644x_init_devices(void)
> platform_device_register(&dm644x_edma_device);
> platform_device_register(&dm644x_emac_device);
> platform_device_register(&dm644x_vpss_device);
> + platform_device_register(&dm644x_ccdc_dev);
> platform_device_register(&vpfe_capture_dev);
>
> return 0;
> --
> 1.6.0.4
next prev parent reply other threads:[~2010-01-05 23:34 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-15 16:37 [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver m-karicheri2
2009-12-15 16:37 ` [PATCH - v3 2/4] V4L - vpfe capture - convert dm355 ccdc driver to a " m-karicheri2
2009-12-15 16:37 ` [PATCH - v3 3/4] V4L - vpfe capture - convert dm644x ccdc module " m-karicheri2
2009-12-15 16:37 ` [PATCH - v3 1/4] V4L - vpfe_capture - remove clock and ccdc resource handling m-karicheri2
2010-01-05 23:28 ` Kevin Hilman [this message]
2010-01-06 14:44 ` [PATCH - v3 4/4] DaVinci - vpfe-capture-converting ccdc drivers to platform driver Karicheri, Muralidharan
2010-01-06 16:04 ` Kevin Hilman
2010-01-06 16:20 ` Karicheri, Muralidharan
2010-01-06 16:36 ` Kevin Hilman
2010-01-07 18:18 ` Karicheri, Muralidharan
2010-01-07 19:43 ` Kevin Hilman
2010-01-07 21:33 ` Karicheri, Muralidharan
2010-01-07 21:50 ` Kevin Hilman
2010-01-07 23:25 ` Karicheri, Muralidharan
2010-01-08 9:06 ` Hiremath, Vaibhav
2010-01-08 15:10 ` Kevin Hilman
2010-01-11 4:36 ` Hiremath, Vaibhav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=871vi4rv25.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=hverkuil@xs4all.nl \
--cc=linux-media@vger.kernel.org \
--cc=m-karicheri2@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.