All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: "A. Sverdlin" <alexander.sverdlin@siemens.com>, u-boot@lists.denx.de
Cc: Felipe Balbi <felipe.balbi@linux.intel.com>,
	Marek Vasut <marex@denx.de>,
	Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
	Nishanth Menon <nm@ti.com>, Sjoerd Simons <sjoerd@collabora.com>,
	Alexander Sverdlin <alexander.sverdlin@siemens.com>
Subject: Re: [PATCH 1/6] usb: dwc3: gadget: combine return points into a single one
Date: Tue, 14 May 2024 14:48:29 +0200	[thread overview]
Message-ID: <8734qk5zky.fsf@baylibre.com> (raw)
In-Reply-To: <20240412202611.3565052-2-alexander.sverdlin@siemens.com>

Hi Alexander,

Thank you for the patch.

On ven., avril 12, 2024 at 22:26, "A. Sverdlin" <alexander.sverdlin@siemens.com> wrote:

> From: Felipe Balbi <felipe.balbi@linux.intel.com>
>
> Upstream Linux commit c0ca324d09a0.
>
> dwc3_send_gadget_ep_cmd() had three return
> points. That becomes a pain to track when we need to
> debug something or if we need to add more code
> before returning.
>
> Let's combine all three return points into a single
> one just by introducing a local 'ret' variable.
>
> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>

Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>

> ---
>  drivers/usb/dwc3/gadget.c | 12 +++++++++---
>  1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 69d9fe40e2f87..17c19285f1c24 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -302,6 +302,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
>  {
>  	u32			timeout = 500;
>  	u32			reg;
> +	int			ret = -EINVAL;
>  
>  	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
>  	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
> @@ -313,7 +314,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
>  		if (!(reg & DWC3_DEPCMD_CMDACT)) {
>  			dev_vdbg(dwc->dev, "Command Complete --> %d\n",
>  					DWC3_DEPCMD_STATUS(reg));
> -			return 0;
> +			ret = 0;
> +			break;
>  		}
>  
>  		/*
> @@ -321,11 +323,15 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
>  		 * interrupt context.
>  		 */
>  		timeout--;
> -		if (!timeout)
> -			return -ETIMEDOUT;
> +		if (!timeout) {
> +			ret = -ETIMEDOUT;
> +			break;
> +		}
>  
>  		udelay(1);
>  	} while (1);
> +
> +	return ret;
>  }
>  
>  static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
> -- 
> 2.44.0

  reply	other threads:[~2024-05-14 12:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-12 20:26 [PATCH 0/6] usb: dwc3: gadget: avoid EP command timeout A. Sverdlin
2024-04-12 20:26 ` [PATCH 1/6] usb: dwc3: gadget: combine return points into a single one A. Sverdlin
2024-05-14 12:48   ` Mattijs Korpershoek [this message]
2024-04-12 20:26 ` [PATCH 2/6] usb: dwc3: gadget: clear SUSPHY bit before ep cmds A. Sverdlin
2024-05-14 12:52   ` Mattijs Korpershoek
2024-04-12 20:26 ` [PATCH 3/6] usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED A. Sverdlin
2024-05-14 12:55   ` Mattijs Korpershoek
2024-04-12 20:26 ` [PATCH 4/6] usb: dwc3: gadget: Check ENBLSLPM before sending ep command A. Sverdlin
2024-05-14 12:57   ` Mattijs Korpershoek
2024-04-12 20:26 ` [PATCH 5/6] usb: dwc3: gadget: properly check ep cmd A. Sverdlin
2024-05-14 13:00   ` Mattijs Korpershoek
2024-04-12 20:26 ` [PATCH 6/6] usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer A. Sverdlin
2024-04-13  6:02   ` Greg Kroah-Hartman
2024-05-14 13:05   ` Mattijs Korpershoek
2024-05-16  6:40 ` [PATCH 0/6] usb: dwc3: gadget: avoid EP command timeout Mattijs Korpershoek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8734qk5zky.fsf@baylibre.com \
    --to=mkorpershoek@baylibre.com \
    --cc=Thinh.Nguyen@synopsys.com \
    --cc=alexander.sverdlin@siemens.com \
    --cc=felipe.balbi@linux.intel.com \
    --cc=marex@denx.de \
    --cc=nm@ti.com \
    --cc=sjoerd@collabora.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.