From: Jani Nikula <jani.nikula@linux.intel.com>
To: "Ville Syrjälä" <ville.syrjala@linux.intel.com>,
"Rodrigo Vivi" <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 3/3] drm/i915: Pick the backlight controller based on VBT on ICP+
Date: Thu, 09 Feb 2023 12:14:12 +0200 [thread overview]
Message-ID: <87357fxi17.fsf@intel.com> (raw)
In-Reply-To: <Y+PLnhNNm+X3Z8r1@intel.com>
On Wed, 08 Feb 2023, Ville Syrjälä <ville.syrjala@linux.intel.com> wrote:
> On Wed, Feb 08, 2023 at 10:23:55AM -0500, Rodrigo Vivi wrote:
>> On Tue, Feb 07, 2023 at 08:43:37AM +0200, Ville Syrjala wrote:
>> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> >
>> > Use the second backlight controller on ICP+ if the VBT asks
>> > us to do so.
>> >
>> > On pre-MTP we also check the chicken bit to make sure the
>> > pins have been correctly muxed by the firmware.
>> >
>>
>> It looks like CC: stable was added while merging this patch.
>> But it doesn't go clean. build fails due to s/dev_priv/i915
>> and also due to the lack of ICP_SECOND_PPS_IO_SELECT that
>> was added by another patch.
>>
>> So we need a backported version of this patch to be included
>> in the stable trees... how far we will go in the stable tree?
>>
>> At this point of -rc7 I even wonder it will be better to stay
>> for 6.2 to get released and then send the backported version
>> to the stable ml directly...
>
> Yeah, let's attempt the backport after 6.2 is out.
Agreed.
In any case, Cc: stable doesn't mean the commit actually backports
cleanly, but that it should be backported. Otherwise it'll just be
forgotten.
BR,
Jani.
>
>>
>> > Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8016
>> > Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> > ---
>> > .../gpu/drm/i915/display/intel_backlight.c | 34 +++++++++++++++++--
>> > 1 file changed, 31 insertions(+), 3 deletions(-)
>> >
>> > diff --git a/drivers/gpu/drm/i915/display/intel_backlight.c b/drivers/gpu/drm/i915/display/intel_backlight.c
>> > index 5b7da72c95b8..a4e4b7f79e4d 100644
>> > --- a/drivers/gpu/drm/i915/display/intel_backlight.c
>> > +++ b/drivers/gpu/drm/i915/display/intel_backlight.c
>> > @@ -1431,6 +1431,30 @@ bxt_setup_backlight(struct intel_connector *connector, enum pipe unused)
>> > return 0;
>> > }
>> >
>> > +static int cnp_num_backlight_controllers(struct drm_i915_private *i915)
>> > +{
>> > + if (INTEL_PCH_TYPE(i915) >= PCH_DG1)
>> > + return 1;
>> > +
>> > + if (INTEL_PCH_TYPE(i915) >= PCH_ICP)
>> > + return 2;
>> > +
>> > + return 1;
>> > +}
>> > +
>> > +static bool cnp_backlight_controller_is_valid(struct drm_i915_private *i915, int controller)
>> > +{
>> > + if (controller < 0 || controller >= cnp_num_backlight_controllers(i915))
>> > + return false;
>> > +
>> > + if (controller == 1 &&
>> > + INTEL_PCH_TYPE(i915) >= PCH_ICP &&
>> > + INTEL_PCH_TYPE(i915) < PCH_MTP)
>> > + return intel_de_read(i915, SOUTH_CHICKEN1) & ICP_SECOND_PPS_IO_SELECT;
>> > +
>> > + return true;
>> > +}
>> > +
>> > static int
>> > cnp_setup_backlight(struct intel_connector *connector, enum pipe unused)
>> > {
>> > @@ -1440,10 +1464,14 @@ cnp_setup_backlight(struct intel_connector *connector, enum pipe unused)
>> >
>> > /*
>> > * CNP has the BXT implementation of backlight, but with only one
>> > - * controller. TODO: ICP has multiple controllers but we only use
>> > - * controller 0 for now.
>> > + * controller. ICP+ can have two controllers, depending on pin muxing.
>> > */
>> > - panel->backlight.controller = 0;
>> > + panel->backlight.controller = connector->panel.vbt.backlight.controller;
>> > + if (!cnp_backlight_controller_is_valid(i915, panel->backlight.controller)) {
>> > + drm_dbg_kms(&i915->drm, "Invalid backlight controller %d, assuming 0\n",
>> > + panel->backlight.controller);
>> > + panel->backlight.controller = 0;
>> > + }
>> >
>> > pwm_ctl = intel_de_read(i915,
>> > BXT_BLC_PWM_CTL(panel->backlight.controller));
>> > --
>> > 2.39.1
>> >
--
Jani Nikula, Intel Open Source Graphics Center
next prev parent reply other threads:[~2023-02-09 10:14 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-07 6:43 [Intel-gfx] [PATCH 0/3] drm/i915: Fix eDP+DSI dual panel systems Ville Syrjala
2023-02-07 6:43 ` [Intel-gfx] [PATCH 1/3] drm/i915: Fix VBT DSI DVO port handling Ville Syrjala
2023-02-07 8:59 ` Jani Nikula
2023-02-07 9:05 ` Ville Syrjälä
2023-02-07 9:33 ` Jani Nikula
2023-02-07 6:43 ` [Intel-gfx] [PATCH 2/3] drm/i915: Populate encoder->devdata for DSI on icl+ Ville Syrjala
2023-02-07 9:06 ` Jani Nikula
2023-02-08 1:27 ` Ville Syrjälä
2023-02-07 6:43 ` [Intel-gfx] [PATCH 3/3] drm/i915: Pick the backlight controller based on VBT on ICP+ Ville Syrjala
2023-02-07 9:32 ` Jani Nikula
2023-02-08 15:23 ` Rodrigo Vivi
2023-02-08 16:19 ` Ville Syrjälä
2023-02-09 10:14 ` Jani Nikula [this message]
2023-02-07 7:24 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915: Fix eDP+DSI dual panel systems Patchwork
2023-02-07 7:41 ` [Intel-gfx] ✗ Fi.CI.BAT: failure " Patchwork
2023-02-07 10:22 ` [Intel-gfx] ✗ Fi.CI.SPARSE: warning for drm/i915: Fix eDP+DSI dual panel systems (rev2) Patchwork
2023-02-07 22:32 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915: Fix eDP+DSI dual panel systems (rev3) Patchwork
2023-02-08 0:20 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87357fxi17.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=rodrigo.vivi@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.