From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>,
Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: Re: [PATCH v2 2/3] ARM: dts: marvell: kirkwood: Correct indentation
Date: Mon, 13 Jul 2026 17:52:12 +0200 [thread overview]
Message-ID: <874ii27uqb.fsf@BLaptop.bootlin.com> (raw)
In-Reply-To: <20260706180333.648401-5-krzysztof.kozlowski@oss.qualcomm.com>
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> writes:
> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>
Applied on mvebu/dt
Thanks,
Gregory
> ---
>
> Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
>
> Changes in v2:
> 1. One more fix in arch/arm/boot/dts/marvell/kirkwood-b3.dts
> ---
> arch/arm/boot/dts/marvell/kirkwood-b3.dts | 4 ++--
> .../arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts | 2 +-
> arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi | 2 +-
> arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts | 2 +-
> arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts | 2 +-
> arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi | 2 +-
> 6 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-b3.dts b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> index 681343c1357a..9d5cc1689864 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-b3.dts
> @@ -94,10 +94,10 @@ i2c@11000 {
>
> serial@12000 {
> /* Internal on test pins, 3.3v TTL
> - * UART0_RX = Testpoint 65
> + * UART0_RX = Testpoint 65
> * UART0_TX = Testpoint 66
> * See the Excito Wiki for more details.
> - */
> + */
> status = "okay";
> };
>
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> index cb564c3bcdc4..a9adb777c7a0 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-netgear_readynas_duo_v2.dts
> @@ -239,7 +239,7 @@ ethernet0-port@0 {
> };
>
> &pciec {
> - status = "okay";
> + status = "okay";
> };
>
> &pcie0 {
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> index d6b615cf6390..121d84609f20 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi
> @@ -83,7 +83,7 @@ &mdio {
> status = "okay";
>
> ethphy0: ethernet-phy@X {
> - /* overwrite reg property in board file */
> + /* overwrite reg property in board file */
> };
> };
>
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> index 20c6290d2037..82ccc6feaf3c 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts
> @@ -109,7 +109,7 @@ led-yellow {
> label = "obsa6:yellow:stat";
> gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> };
> - };
> + };
>
> gpio_keys {
> compatible = "gpio-keys";
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> index 2bc4b68bd723..ff08b01434bf 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts
> @@ -130,7 +130,7 @@ led-yellow {
> label = "obsa7:yellow:stat";
> gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
> };
> - };
> + };
>
> gpio_keys {
> compatible = "gpio-keys";
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> index f136059607b7..6c15e9257de3 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> +++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi
> @@ -57,7 +57,7 @@ &mdio {
>
> ethphy1: ethernet-phy@1 {
> device_type = "ethernet-phy";
> - /* overwrite reg property in board file */
> + /* overwrite reg property in board file */
> };
> };
>
> --
> 2.53.0
>
--
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2026-07-13 15:52 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 18:03 [PATCH v2 1/3] ARM: dts: marvell: armada: Correct indentation Krzysztof Kozlowski
2026-07-06 18:03 ` [PATCH v2 2/3] ARM: dts: marvell: kirkwood: " Krzysztof Kozlowski
2026-07-13 15:52 ` Gregory CLEMENT [this message]
2026-07-06 18:03 ` [PATCH v2 3/3] ARM: dts: marvell: orion5x: " Krzysztof Kozlowski
2026-07-13 15:52 ` Gregory CLEMENT
2026-07-13 15:52 ` [PATCH v2 1/3] ARM: dts: marvell: armada: " Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874ii27uqb.fsf@BLaptop.bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.