Re: [patch 3/3] mpc8349emitx.dts: Add ds1339 RTC

[Peter Korsgaard <jacmet@sunsite.dk>]

>>>>> "Scott" == Scott Wood <scottwood@freescale.com> writes:

Hi,

 Scott> #size-cells is zero on i2c, so it should just be reg = <68>.

 Scott> You'll probably need to add #address-cells and #size-cells to the
 Scott> controller node, as well.

Ahh - Thanks. This should be better.
---

[PATCH] mpc8349emitx.dts: Add ds1339 RTC

Add ds1339 I2C RTC chip as child of 2nd I2C controller.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
 arch/powerpc/boot/dts/mpc8349emitx.dts |    9 +++++++++
 1 file changed, 9 insertions(+)

Index: linux/arch/powerpc/boot/dts/mpc8349emitx.dts
===================================================================
--- linux.orig/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ linux/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -62,12 +62,21 @@
 		};
 
 		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			device_type = "i2c";
 			compatible = "fsl-i2c";
 			reg = <3100 100>;
 			interrupts = <f 8>;
 			interrupt-parent = < &ipic >;
 			dfsrr;
+
+			rtc@68 {
+				device_type = "rtc";
+				compatible = "dallas,ds1339";
+				reg = <68>;
+			};
+
 		};
 
 		spi@7000 {

-- 
Bye, Peter Korsgaard