All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kalle Valo <kvalo@codeaurora.org>
To: Pavel Procopiuc <pavel.procopiuc@gmail.com>
Cc: ath11k@lists.infradead.org
Subject: Re: ath11k-qca6390-bringup-202011191920: new suspend implementation
Date: Fri, 20 Nov 2020 11:40:19 +0200	[thread overview]
Message-ID: <875z60tlh8.fsf@codeaurora.org> (raw)
In-Reply-To: <ba11dcda-ed2c-6840-e42c-bb3fa4e59cec@gmail.com> (Pavel Procopiuc's message of "Thu, 19 Nov 2020 23:00:48 +0100")

Pavel Procopiuc <pavel.procopiuc@gmail.com> writes:

> Suspend seems to work. The log after booting with memmap=20M$12M and doing suspend:
> Nov 19 22:47:59 razor kernel: Linux version 5.10.0-rc4 (root@razor)
> (gcc (Gentoo 9.3.0-r1 p3) 9.3.0, GNU ld (Gentoo 2.34 p6) 2.34.0) #14
> SMP Thu Nov 19 22:44:32 CET 2020
> Nov 19 22:47:59 razor kernel: Command line: ro root=/dev/nvme0n1p2
> resume=/dev/nvme1n1p1 zram.num_devices=2 memmap=20M$12M quiet
> Nov 19 22:47:59 razor kernel:   DMA zone: 47 pages used for memmap
> Nov 19 22:47:59 razor kernel:   DMA32 zone: 5149 pages used for memmap
> Nov 19 22:47:59 razor kernel:   Normal zone: 255840 pages used for memmap
> Nov 19 22:47:59 razor kernel: Kernel command line: ro
> root=/dev/nvme0n1p2 resume=/dev/nvme1n1p1 zram.num_devices=2
> memmap=20M$12M quiet ro root=/dev/nvme0n1p2 resume=/dev/nvme1n1p1
> zram.num_devices=2 memmap=20M$12M quiet
> Nov 19 22:47:59 razor kernel: pci 0000:05:00.0: [17cb:1101] type 00 class 0x028000
> Nov 19 22:47:59 razor kernel: pci 0000:05:00.0: reg 0x10: [mem
> 0xd2100000-0xd21fffff 64bit]
> Nov 19 22:47:59 razor kernel: pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
> Nov 19 22:47:59 razor kernel: pci 0000:05:00.0: 4.000 Gb/s available
> PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:1c.1
> (capable of 7.876 Gb/s with 8.0 GT/s PCIe x1 link)
> Nov 19 22:47:59 razor kernel: pci 0000:05:00.0: Adding to iommu group 21
> Nov 19 22:48:00 razor kernel: ath11k_pci 0000:05:00.0: WARNING: ath11k
> PCI support is experimental!
> Nov 19 22:48:00 razor kernel: ath11k_pci 0000:05:00.0: BAR 0: assigned
> [mem 0xd2100000-0xd21fffff 64bit]
> Nov 19 22:48:00 razor kernel: ath11k_pci 0000:05:00.0: enabling device (0000 -> 0002)
> Nov 19 22:48:00 razor kernel: ath11k_pci 0000:05:00.0: MSI vectors: 32
> Nov 19 22:48:00 razor kernel: mhi 0000:05:00.0: Requested to power ON
> Nov 19 22:48:00 razor kernel: mhi 0000:05:00.0: Power on setup success
> Nov 19 22:48:00 razor kernel: ath11k_pci 0000:05:00.0: qmi req
> mem_seg[0] 0x2800000 3522560 1
> Nov 19 22:48:00 razor kernel: ath11k_pci 0000:05:00.0: qmi req
> mem_seg[1] 0x2500000 884736 4
> Nov 19 22:48:00 razor kernel: ath11k_pci 0000:05:00.0: chip_id 0x0
> chip_family 0xb board_id 0xff soc_id 0xffffffff
> Nov 19 22:48:00 razor kernel: ath11k_pci 0000:05:00.0: fw_version
> 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id
> Nov 19 22:48:02 razor NetworkManager[793]: <info>  [1605822482.1378]
> rfkill1: found Wi-Fi radio killswitch (at
> /sys/devices/pci0000:00/0000:00:1c.1/0000:05:00.0/ieee80211/phy0/rfkill1)
> (driver ath11k_pci)
> Nov 19 22:48:04 razor ModemManager[725]: <info>  Couldn't check
> support for device
> '/sys/devices/pci0000:00/0000:00:1c.1/0000:05:00.0': not supported by
> any plugin
>
> ... suspend here ...
>
> Nov 19 22:49:30 razor kernel: mhi 0000:05:00.0: Allowing M3 transition
> Nov 19 22:49:30 razor kernel: mhi 0000:05:00.0: Wait for M3 completion
> Nov 19 22:49:30 razor kernel: mhi 0000:05:00.0: Entered with PM state:
> M3, MHI state: M3
> Nov 19 22:49:33 razor ModemManager[725]: <info>  Couldn't check
> support for device
> '/sys/devices/pci0000:00/0000:00:1c.1/0000:05:00.0': not supported by
> any plugin

And I guess resume also worked? :) Do you have logs about resume?

You had Dell XPS 17, right?

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

-- 
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  parent reply	other threads:[~2020-11-20  9:40 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-19 19:48 ath11k-qca6390-bringup-202011191920: new suspend implementation Kalle Valo
2020-11-19 19:52 ` Kalle Valo
2020-11-19 22:00   ` Pavel Procopiuc
2020-11-19 22:11     ` wi nk
2020-11-19 23:08       ` wi nk
2020-11-20 16:01         ` Kalle Valo
2020-11-20 16:59           ` wi nk
2020-11-20  8:16       ` Pavel Procopiuc
2020-11-20  9:40     ` Kalle Valo [this message]
2020-11-20 10:24       ` Pavel Procopiuc
2020-11-20 15:56         ` Kalle Valo
2020-11-21 23:44   ` Mitchell Nordine
2020-11-22 13:15     ` Mitchell Nordine
2020-11-22 15:07       ` wi nk
2020-11-23  3:14         ` wi nk
2020-11-23 23:30           ` wi nk
2020-11-23 23:38             ` wi nk
2020-11-26 22:45               ` wi nk
2020-12-02 18:51 ` Pavel Procopiuc

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=875z60tlh8.fsf@codeaurora.org \
    --to=kvalo@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=pavel.procopiuc@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.