From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from smtp.codeaurora.org ([198.145.29.96]) by bombadil.infradead.org with esmtps (Exim 4.92 #3 (Red Hat Linux)) id 1hgrC4-0002bg-10 for ath10k@lists.infradead.org; Fri, 28 Jun 2019 13:45:37 +0000 From: Kalle Valo Subject: Re: ath10k-firmware: IPQ4018 hw1.0: Add EnGenius ENS620EXT specific BDFs References: <7C60B6E9-D2E1-44C6-8818-5E22D435C4BD@cablelabs.com> Date: Fri, 28 Jun 2019 16:45:31 +0300 In-Reply-To: <7C60B6E9-D2E1-44C6-8818-5E22D435C4BD@cablelabs.com> (Steve Glennon's message of "Mon, 11 Mar 2019 18:41:53 +0000") Message-ID: <875zopdds4.fsf@kamboji.qca.qualcomm.com> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: Steve Glennon Cc: "ath10k@lists.infradead.org" Steve Glennon writes: > I am adding support for this device to OpenWrt. This AP requires > two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board- > id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't > provide special IDs for customers and seems to use the AP-DK board-ids in the > wifi firmware to change its behavior. > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a IPQ4018 based board > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - from stock firmware image > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT > md5sum: > 06b06ff901de575a57b054af238c1335 > + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT.bin > md5sum: > 7cb23e1ff21179de5c4e726552864285 > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin") Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENS620EXT bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENS620EXT Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 50 in total https://github.com/kvalo/ath10k-firmware/commit/30a36dcd3c77668891cf12971f80b5cdb4fa851d -- Kalle Valo _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k