diff for duplicates of <8760jafiy8.fsf@free-electrons.com> diff --git a/a/1.txt b/N1/1.txt index cb3f115..2480d48 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,6 +1,6 @@ Hi Ralph, - On mer., mars 08 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote: + On mer., mars 08 2017, Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > Add appropriate properties to devices in the Linksys WRT AC Series for the > mvneta driver to use hardware buffer management. @@ -8,7 +8,7 @@ Hi Ralph, > Also update "soc" ranges property and set the status of bm and bm-bppi > to "okay" (SRAM). > -> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> +> Signed-off-by: Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > --- > arch/arm/boot/dts/armada-385-linksys.dtsi | 17 ++++++++++++++++- > arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 17 ++++++++++++++++- @@ -27,9 +27,9 @@ Hi Ralph, > + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; > > internal-regs { -> i2c at 11000 { +> i2c@11000 { > @@ -88,6 +89,9 @@ -> ethernet at 70000 { +> ethernet@70000 { > status = "okay"; > phy-mode = "rgmii-id"; > + buffer-manager = <&bm>; @@ -39,7 +39,7 @@ Hi Ralph, > speed = <1000>; > full-duplex; > @@ -97,6 +101,9 @@ -> ethernet at 34000 { +> ethernet@34000 { > status = "okay"; > phy-mode = "sgmii"; > + buffer-manager = <&bm>; @@ -57,12 +57,12 @@ As only two ports are used here, then each of them can have use 2 of the > status = "okay"; > }; > -> + bm at c8000 { +> + bm@c8000 { > + status = "okay"; > + }; > + > /* USB part of the eSATA/USB 2.0 port */ -> usb at 58000 { +> usb@58000 { > status = "okay"; > @@ -241,6 +252,10 @@ > }; @@ -117,11 +117,11 @@ Gregory > }; > }; > -> + bm at c8000 { +> + bm@c8000 { > + status = "okay"; > + }; > + -> nand at d0000 { +> nand@d0000 { > status = "okay"; > num-cs = <1>; > @@ -259,6 +270,10 @@ @@ -144,3 +144,7 @@ Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 4a60bb5..36fcf2d 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,13 +1,26 @@ "ref\020170308053312.29243-1-ralph.sennhauser@gmail.com\0" - "From\0gregory.clement@free-electrons.com (Gregory CLEMENT)\0" - "Subject\0[PATCH] ARM: dts: mvebu: linksys: enable buffer manager support\0" + "ref\020170308053312.29243-1-ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org\0" + "From\0Gregory CLEMENT <gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>\0" + "Subject\0Re: [PATCH] ARM: dts: mvebu: linksys: enable buffer manager support\0" "Date\0Wed, 15 Mar 2017 20:17:35 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Cc\0Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>" + Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org> + Sebastian Hesselbarth <sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> + Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> + Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org> + Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org> + moderated list:ARM/Marvell Kirkwood and Armada 370 + 375 + 38x + ... <linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org> + open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + " open list <linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>\0" "\00:1\0" "b\0" "Hi Ralph,\n" " \n" - " On mer., mars 08 2017, Ralph Sennhauser <ralph.sennhauser@gmail.com> wrote:\n" + " On mer., mars 08 2017, Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:\n" "\n" "> Add appropriate properties to devices in the Linksys WRT AC Series for the\n" "> mvneta driver to use hardware buffer management.\n" @@ -15,7 +28,7 @@ "> Also update \"soc\" ranges property and set the status of bm and bm-bppi\n" "> to \"okay\" (SRAM).\n" ">\n" - "> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail.com>\n" + "> Signed-off-by: Ralph Sennhauser <ralph.sennhauser-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\n" "> ---\n" "> arch/arm/boot/dts/armada-385-linksys.dtsi | 17 ++++++++++++++++-\n" "> arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 17 ++++++++++++++++-\n" @@ -34,9 +47,9 @@ "> +\t\t\t MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;\n" "> \n" "> \t\tinternal-regs {\n" - "> \t\t\ti2c at 11000 {\n" + "> \t\t\ti2c@11000 {\n" "> @@ -88,6 +89,9 @@\n" - "> \t\t\tethernet at 70000 {\n" + "> \t\t\tethernet@70000 {\n" "> \t\t\t\tstatus = \"okay\";\n" "> \t\t\t\tphy-mode = \"rgmii-id\";\n" "> +\t\t\t\tbuffer-manager = <&bm>;\n" @@ -46,7 +59,7 @@ "> \t\t\t\t\tspeed = <1000>;\n" "> \t\t\t\t\tfull-duplex;\n" "> @@ -97,6 +101,9 @@\n" - "> \t\t\tethernet at 34000 {\n" + "> \t\t\tethernet@34000 {\n" "> \t\t\t\tstatus = \"okay\";\n" "> \t\t\t\tphy-mode = \"sgmii\";\n" "> +\t\t\t\tbuffer-manager = <&bm>;\n" @@ -64,12 +77,12 @@ "> \t\t\t\tstatus = \"okay\";\n" "> \t\t\t};\n" "> \n" - "> +\t\t\tbm at c8000 {\n" + "> +\t\t\tbm@c8000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" "> \t\t\t/* USB part of the eSATA/USB 2.0 port */\n" - "> \t\t\tusb at 58000 {\n" + "> \t\t\tusb@58000 {\n" "> \t\t\t\tstatus = \"okay\";\n" "> @@ -241,6 +252,10 @@\n" "> \t\t\t};\n" @@ -124,11 +137,11 @@ "> \t\t\t\t};\n" "> \t\t\t};\n" "> \n" - "> +\t\t\tbm at c8000 {\n" + "> +\t\t\tbm@c8000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" - "> \t\t\tnand at d0000 {\n" + "> \t\t\tnand@d0000 {\n" "> \t\t\t\tstatus = \"okay\";\n" "> \t\t\t\tnum-cs = <1>;\n" "> @@ -259,6 +270,10 @@\n" @@ -150,6 +163,10 @@ "Gregory Clement, Free Electrons\n" "Kernel, drivers, real-time and embedded Linux\n" "development, consulting, training and support.\n" - http://free-electrons.com + "http://free-electrons.com\n" + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -f9c771bb1a63a39e0ed2ded338b9fdc31483c7beac8fef2c1b31d9482340294b +e61876ddccbe07c69ec8b23f26617245f8e1f82ca9ea390d2a75541c5407e794
diff --git a/a/1.txt b/N2/1.txt index cb3f115..d33037c 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -27,9 +27,9 @@ Hi Ralph, > + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; > > internal-regs { -> i2c at 11000 { +> i2c@11000 { > @@ -88,6 +89,9 @@ -> ethernet at 70000 { +> ethernet@70000 { > status = "okay"; > phy-mode = "rgmii-id"; > + buffer-manager = <&bm>; @@ -39,7 +39,7 @@ Hi Ralph, > speed = <1000>; > full-duplex; > @@ -97,6 +101,9 @@ -> ethernet at 34000 { +> ethernet@34000 { > status = "okay"; > phy-mode = "sgmii"; > + buffer-manager = <&bm>; @@ -57,12 +57,12 @@ As only two ports are used here, then each of them can have use 2 of the > status = "okay"; > }; > -> + bm at c8000 { +> + bm@c8000 { > + status = "okay"; > + }; > + > /* USB part of the eSATA/USB 2.0 port */ -> usb at 58000 { +> usb@58000 { > status = "okay"; > @@ -241,6 +252,10 @@ > }; @@ -117,11 +117,11 @@ Gregory > }; > }; > -> + bm at c8000 { +> + bm@c8000 { > + status = "okay"; > + }; > + -> nand at d0000 { +> nand@d0000 { > status = "okay"; > num-cs = <1>; > @@ -259,6 +270,10 @@ diff --git a/a/content_digest b/N2/content_digest index 4a60bb5..4fd88e0 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,8 +1,20 @@ "ref\020170308053312.29243-1-ralph.sennhauser@gmail.com\0" - "From\0gregory.clement@free-electrons.com (Gregory CLEMENT)\0" - "Subject\0[PATCH] ARM: dts: mvebu: linksys: enable buffer manager support\0" + "From\0Gregory CLEMENT <gregory.clement@free-electrons.com>\0" + "Subject\0Re: [PATCH] ARM: dts: mvebu: linksys: enable buffer manager support\0" "Date\0Wed, 15 Mar 2017 20:17:35 +0100\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Ralph Sennhauser <ralph.sennhauser@gmail.com>\0" + "Cc\0Jason Cooper <jason@lakedaemon.net>" + Andrew Lunn <andrew@lunn.ch> + Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + Rob Herring <robh+dt@kernel.org> + Mark Rutland <mark.rutland@arm.com> + Russell King <linux@armlinux.org.uk> + linux-arm-kernel@lists.infradead.org (moderated list:ARM/Marvell Kirkwood and Armada 370 + 375 + 38x + ...) + devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS) + " linux-kernel@vger.kernel.org (open list)\0" "\00:1\0" "b\0" "Hi Ralph,\n" @@ -34,9 +46,9 @@ "> +\t\t\t MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;\n" "> \n" "> \t\tinternal-regs {\n" - "> \t\t\ti2c at 11000 {\n" + "> \t\t\ti2c@11000 {\n" "> @@ -88,6 +89,9 @@\n" - "> \t\t\tethernet at 70000 {\n" + "> \t\t\tethernet@70000 {\n" "> \t\t\t\tstatus = \"okay\";\n" "> \t\t\t\tphy-mode = \"rgmii-id\";\n" "> +\t\t\t\tbuffer-manager = <&bm>;\n" @@ -46,7 +58,7 @@ "> \t\t\t\t\tspeed = <1000>;\n" "> \t\t\t\t\tfull-duplex;\n" "> @@ -97,6 +101,9 @@\n" - "> \t\t\tethernet at 34000 {\n" + "> \t\t\tethernet@34000 {\n" "> \t\t\t\tstatus = \"okay\";\n" "> \t\t\t\tphy-mode = \"sgmii\";\n" "> +\t\t\t\tbuffer-manager = <&bm>;\n" @@ -64,12 +76,12 @@ "> \t\t\t\tstatus = \"okay\";\n" "> \t\t\t};\n" "> \n" - "> +\t\t\tbm at c8000 {\n" + "> +\t\t\tbm@c8000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" "> \t\t\t/* USB part of the eSATA/USB 2.0 port */\n" - "> \t\t\tusb at 58000 {\n" + "> \t\t\tusb@58000 {\n" "> \t\t\t\tstatus = \"okay\";\n" "> @@ -241,6 +252,10 @@\n" "> \t\t\t};\n" @@ -124,11 +136,11 @@ "> \t\t\t\t};\n" "> \t\t\t};\n" "> \n" - "> +\t\t\tbm at c8000 {\n" + "> +\t\t\tbm@c8000 {\n" "> +\t\t\t\tstatus = \"okay\";\n" "> +\t\t\t};\n" "> +\n" - "> \t\t\tnand at d0000 {\n" + "> \t\t\tnand@d0000 {\n" "> \t\t\t\tstatus = \"okay\";\n" "> \t\t\t\tnum-cs = <1>;\n" "> @@ -259,6 +270,10 @@\n" @@ -152,4 +164,4 @@ "development, consulting, training and support.\n" http://free-electrons.com -f9c771bb1a63a39e0ed2ded338b9fdc31483c7beac8fef2c1b31d9482340294b +d95b36c2b386b78971d11e19e99d763a4b87492c138f904cdea509b3c8e1d505
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.