From: Arto Jantunen <viiru@iki.fi>
To: linux-input@vger.kernel.org
Subject: Touchpad on Asus GL552VW not detected
Date: Sun, 17 Jan 2016 10:20:24 +0200 [thread overview]
Message-ID: <8760ysy5vb.fsf@iki.fi> (raw)
(Please CC me on any replies, I'm not subscribed to the list)
Hi list,
The touchpad on an Asus GL552VW is not detected by Linux 4.2-4.4-rc8 (I
have not tested earlier versions, but booting them on this hardware gets
progressively more difficult and I doubt that the results would
change).
Sadly I don't know what touchpad this machine contains, that information
doesn't seem to be available. The touchpad did work on the pre-installed
Windows image I wiped. Similar generation Asus machines seem to often
have a Focaltech touchpad which has been supported by the kernel for
some time.
Dmesg output when booting with i8042.debug set:
[ 0.405193] i8042: PNP: PS/2 Controller [PNP030b:PS2K] at 0x60,0x64 irq 1
[ 0.405210] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.405247] i8042: [0] d1 -> i8042 (command)
[ 0.405316] i8042: [0] df -> i8042 (parameter)
[ 0.405386] i8042: [0] ff -> i8042 (command)
[ 0.405587] i8042: [0] 20 -> i8042 (command)
[ 0.405827] i8042: [0] 65 <- i8042 (return)
[ 0.405883] i8042: [0] 20 -> i8042 (command)
[ 0.406847] i8042: [0] 65 <- i8042 (return)
[ 0.406859] i8042: [0] 60 -> i8042 (command)
[ 0.407096] i8042: [0] 74 -> i8042 (parameter)
[ 0.407130] i8042: [0] 60 -> i8042 (command)
[ 0.407200] i8042: [0] 65 -> i8042 (parameter)
[ 0.407208] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.407303] mousedev: PS/2 mouse device common for all mice
[ 0.407334] i8042: [0] f2 -> i8042 (kbd-data)
With i8042.nopnp set:
[ 0.400776] i8042: PNP detection disabled
[ 0.400799] i8042: [0] d1 -> i8042 (command)
[ 0.400868] i8042: [0] df -> i8042 (parameter)
[ 0.400938] i8042: [0] ff -> i8042 (command)
[ 0.401138] i8042: [0] 20 -> i8042 (command)
[ 0.401379] i8042: [0] 65 <- i8042 (return)
[ 0.401435] i8042: [0] 20 -> i8042 (command)
[ 0.401678] i8042: [0] 65 <- i8042 (return)
[ 0.401691] i8042: [0] 60 -> i8042 (command)
[ 0.401927] i8042: [0] 74 -> i8042 (parameter)
[ 0.401956] i8042: [0] d3 -> i8042 (command)
[ 0.402026] i8042: [0] 5a -> i8042 (parameter)
[ 0.402110] i8042: [0] 5a <- i8042 (return)
[ 0.402117] i8042: [0] a7 -> i8042 (command)
[ 0.402346] i8042: [0] 20 -> i8042 (command)
[ 0.402478] i8042: [0] 74 <- i8042 (return)
[ 0.402485] i8042: [0] a8 -> i8042 (command)
[ 0.402714] i8042: [0] 20 -> i8042 (command)
[ 0.402846] i8042: [0] 54 <- i8042 (return)
[ 0.402867] i8042: [0] 60 -> i8042 (command)
[ 0.403102] i8042: [0] 56 -> i8042 (parameter)
[ 0.403117] i8042: [0] d3 -> i8042 (command)
[ 0.403187] i8042: [0] a5 -> i8042 (parameter)
[ 0.403268] i8042: [0] a5 <- i8042 (aux_test_irq, aux)
[ 0.403285] i8042: [0] 60 -> i8042 (command)
[ 0.403466] i8042: [0] 74 -> i8042 (parameter)
[ 0.403550] i8042: [0] d3 -> i8042 (command)
[ 0.403786] i8042: [0] f0 -> i8042 (parameter)
[ 0.403870] i8042: [0] f0 <- i8042 (return)
[ 0.403877] i8042: [0] d3 -> i8042 (command)
[ 0.404756] i8042: [1] 56 -> i8042 (parameter)
[ 0.404896] i8042: [1] 56 <- i8042 (return)
[ 0.404917] i8042: [1] d3 -> i8042 (command)
[ 0.405153] i8042: [1] a4 -> i8042 (parameter)
[ 0.405237] i8042: [1] 11 <- i8042 (return)
[ 0.405238] i8042: Detected active multiplexing controller, rev 1.1
[ 0.405260] i8042: [1] 60 -> i8042 (command)
[ 0.405496] i8042: [1] 74 -> i8042 (parameter)
[ 0.405525] i8042: [1] 90 -> i8042 (command)
[ 0.405594] i8042: [1] a8 -> i8042 (command)
[ 0.405664] i8042: [1] 91 -> i8042 (command)
[ 0.405734] i8042: [1] a8 -> i8042 (command)
[ 0.405804] i8042: [1] 92 -> i8042 (command)
[ 0.405873] i8042: [1] a8 -> i8042 (command)
[ 0.405943] i8042: [1] 93 -> i8042 (command)
[ 0.406179] i8042: [1] a8 -> i8042 (command)
[ 0.406249] i8042: [1] 60 -> i8042 (command)
[ 0.406319] i8042: [1] 56 -> i8042 (parameter)
[ 0.406346] i8042: [1] 60 -> i8042 (command)
[ 0.406415] i8042: [1] 47 -> i8042 (parameter)
[ 0.406423] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.406437] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.406454] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.406468] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.406531] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.406659] mousedev: PS/2 mouse device common for all mice
[ 0.407220] i8042: [1] f2 -> i8042 (kbd-data)
[ 0.410091] i8042: [2] fa <- i8042 (interrupt, 0, 1)
[ 0.446451] i8042: [11] f5 -> i8042 (kbd-data)
[ 0.449285] i8042: [12] fa <- i8042 (interrupt, 0, 1)
[ 0.449316] i8042: [12] ed -> i8042 (kbd-data)
[ 0.452935] i8042: [13] fa <- i8042 (interrupt, 0, 1)
[ 0.452975] i8042: [13] 00 -> i8042 (kbd-data)
[ 0.455932] i8042: [13] fa <- i8042 (interrupt, 0, 1)
[ 0.456036] i8042: [13] f3 -> i8042 (kbd-data)
[ 0.459595] i8042: [14] fa <- i8042 (interrupt, 0, 1)
[ 0.459620] i8042: [14] 00 -> i8042 (kbd-data)
[ 0.462583] i8042: [15] fa <- i8042 (interrupt, 0, 1)
[ 0.462615] i8042: [15] f4 -> i8042 (kbd-data)
[ 0.466255] i8042: [16] fa <- i8042 (interrupt, 0, 1)
[ 0.466303] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.467003] i8042: [16] 90 -> i8042 (command)
[ 0.467072] i8042: [16] f2 -> i8042 (parameter)
[ 0.493711] i8042: [23] MUX error, status is 35, data is fe
[ 0.493712] i8042: [23] fe <- i8042 (interrupt, 2, 12, timeout)
[ 0.493740] i8042: [23] 90 -> i8042 (command)
[ 0.494641] i8042: [23] ed -> i8042 (parameter)
[ 0.521296] i8042: [30] MUX error, status is 35, data is fe
[ 0.521297] i8042: [30] fe <- i8042 (interrupt, 2, 12, timeout)
[ 0.521325] i8042: [30] 91 -> i8042 (command)
[ 0.522175] i8042: [30] f2 -> i8042 (parameter)
[ 0.522463] i8042: [30] MUX error, status is 75, data is fe
[ 0.522464] i8042: [30] fe <- i8042 (interrupt, 3, 12, timeout)
[ 0.522492] i8042: [30] 91 -> i8042 (command)
[ 0.522711] i8042: [30] ed -> i8042 (parameter)
[ 0.522999] i8042: [30] MUX error, status is 75, data is fe
[ 0.523021] i8042: [30] fe <- i8042 (interrupt, 3, 12, timeout)
[ 0.523044] i8042: [30] 92 -> i8042 (command)
[ 0.523247] i8042: [30] f2 -> i8042 (parameter)
[ 0.549916] i8042: [37] MUX error, status is b5, data is fe
[ 0.549917] i8042: [37] fe <- i8042 (interrupt, 4, 12, timeout)
[ 0.549981] i8042: [37] 92 -> i8042 (command)
[ 0.550883] i8042: [37] ed -> i8042 (parameter)
[ 0.577522] i8042: [44] MUX error, status is b5, data is fe
[ 0.577523] i8042: [44] fe <- i8042 (interrupt, 4, 12, timeout)
[ 0.577553] i8042: [44] 93 -> i8042 (command)
[ 0.578460] i8042: [44] f2 -> i8042 (parameter)
[ 0.605342] i8042: [51] MUX error, status is f5, data is fe
[ 0.605344] i8042: [51] fe <- i8042 (interrupt, 5, 12, timeout)
[ 0.605359] i8042: [51] 93 -> i8042 (command)
[ 0.606259] i8042: [51] ed -> i8042 (parameter)
[ 0.633160] i8042: [58] MUX error, status is f5, data is fe
[ 0.633162] i8042: [58] fe <- i8042 (interrupt, 5, 12, timeout)
With i8042.nopnp and i8042.nomux set:
[ 0.409029] i8042: PNP detection disabled
[ 0.409065] i8042: [0] d1 -> i8042 (command)
[ 0.409134] i8042: [0] df -> i8042 (parameter)
[ 0.410090] i8042: [0] ff -> i8042 (command)
[ 0.410290] i8042: [0] 20 -> i8042 (command)
[ 0.410532] i8042: [0] 65 <- i8042 (return)
[ 0.410588] i8042: [0] 20 -> i8042 (command)
[ 0.410831] i8042: [0] 65 <- i8042 (return)
[ 0.410844] i8042: [0] 60 -> i8042 (command)
[ 0.411080] i8042: [0] 74 -> i8042 (parameter)
[ 0.411109] i8042: [0] d3 -> i8042 (command)
[ 0.411179] i8042: [0] 5a -> i8042 (parameter)
[ 0.411263] i8042: [0] 5a <- i8042 (return)
[ 0.411271] i8042: [0] a7 -> i8042 (command)
[ 0.411500] i8042: [0] 20 -> i8042 (command)
[ 0.411632] i8042: [0] 74 <- i8042 (return)
[ 0.411639] i8042: [0] a8 -> i8042 (command)
[ 0.411868] i8042: [0] 20 -> i8042 (command)
[ 0.412001] i8042: [0] 54 <- i8042 (return)
[ 0.412021] i8042: [0] 60 -> i8042 (command)
[ 0.412257] i8042: [0] 56 -> i8042 (parameter)
[ 0.412271] i8042: [0] d3 -> i8042 (command)
[ 0.412345] i8042: [1] a5 -> i8042 (parameter)
[ 0.412439] i8042: [1] a5 <- i8042 (aux_test_irq, aux)
[ 0.412459] i8042: [1] 60 -> i8042 (command)
[ 0.412648] i8042: [1] 74 -> i8042 (parameter)
[ 0.412738] i8042: [1] 60 -> i8042 (command)
[ 0.412974] i8042: [1] 56 -> i8042 (parameter)
[ 0.413000] i8042: [1] 60 -> i8042 (command)
[ 0.413070] i8042: [1] 47 -> i8042 (parameter)
[ 0.413078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.413092] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.413225] mousedev: PS/2 mouse device common for all mice
[ 0.413257] i8042: [1] f2 -> i8042 (kbd-data)
[ 0.416131] i8042: [1] fa <- i8042 (interrupt, 0, 1)
[ 0.427665] i8042: [4] ab <- i8042 (interrupt, 0, 1)
[ 0.451259] i8042: [10] f5 -> i8042 (kbd-data)
[ 0.454093] i8042: [11] fa <- i8042 (interrupt, 0, 1)
[ 0.454123] i8042: [11] ed -> i8042 (kbd-data)
[ 0.457746] i8042: [12] fa <- i8042 (interrupt, 0, 1)
[ 0.457763] i8042: [12] 00 -> i8042 (kbd-data)
[ 0.460723] i8042: [13] fa <- i8042 (interrupt, 0, 1)
[ 0.460740] i8042: [13] f3 -> i8042 (kbd-data)
[ 0.464465] i8042: [14] fa <- i8042 (interrupt, 0, 1)
[ 0.464522] i8042: [14] 00 -> i8042 (kbd-data)
[ 0.467417] i8042: [14] fa <- i8042 (interrupt, 0, 1)
[ 0.467449] i8042: [14] f4 -> i8042 (kbd-data)
[ 0.471092] i8042: [15] fa <- i8042 (interrupt, 0, 1)
[ 0.471139] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.471860] i8042: [15] d4 -> i8042 (command)
[ 0.471930] i8042: [15] f2 -> i8042 (parameter)
[ 0.498630] i8042: [22] fe <- i8042 (interrupt, 1, 12, timeout)
[ 0.498658] i8042: [22] d4 -> i8042 (command)
[ 0.499559] i8042: [22] ed -> i8042 (parameter)
[ 0.526256] i8042: [29] fe <- i8042 (interrupt, 1, 12, timeout)
[ 0.526272] i8042: [29] 60 -> i8042 (command)
[ 0.527269] i8042: [29] 45 -> i8042 (parameter)
[ 0.527331] i8042: [29] 60 -> i8042 (command)
[ 0.527404] i8042: [29] 47 -> i8042 (parameter)
--
Arto Jantunen
reply other threads:[~2016-01-17 8:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8760ysy5vb.fsf@iki.fi \
--to=viiru@iki.fi \
--cc=linux-input@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.