Re: Problem with driver ath10k_pci

[Kalle Valo <kvalo@kernel.org>]

SALVATORE BUONO <tottobuono@gmail.com> writes:

> Good morning, there is a problem with this driver with new version of
> ubuntu, since before I update to 24.04 it works correctly, but now it does
> not work anymore after sleep/suspension. It disconnects and I tried a lot
> of commands to restart the wifi module but it does not work. This is the
> discussion on ubuntu forum, but no solution is found. Can you fix it?
>
>
> *Salvatore Buono*
> salvatore@salvatore-Inspiron-5515:~$ sudo dmesg | grep ath10k
> [    3.509206] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002)
> [    3.511043] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
> [    3.734071] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310
> [    3.734081] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
> [    3.734432] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
> [    3.799439] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> [    3.881223] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> [    5.804589] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
> [  394.964239] ath10k_pci 0000:02:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000b address=0xfb294f50 flags=0x0070]
> [  402.843038] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
> [  403.045772] ath10k_pci 0000:02:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 1028:0310
> [  403.045788] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0
> [  403.046353] ath10k_pci 0000:02:00.0: firmware ver WLAN.RM.4.4.1-00309- api 6 features wowlan,ignore-otp,mfp crc32 0793bcf2
> [  403.110616] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 d2863f91
> [  403.197531] ath10k_pci 0000:02:00.0: htt-ver 3.87 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
> [  403.259722] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0
> [  418.545075] ath10k_pci 0000:02:00.0: timed out waiting peer stats info
> [  423.537127] ath10k_pci 0000:02:00.0: wmi command 90113 timeout, restarting hardware
> [  423.537147] ath10k_pci 0000:02:00.0: could not request stats (-11)
> [  423.549132] ath10k_pci 0000:02:00.0: could not request peer stats info: -108
> [  423.559691] ath10k_pci 0000:02:00.0: failed to read hi_board_data address: -16
> [  426.587606] ath10k_pci 0000:02:00.0: failed to receive initialized event from target: 00000000
> [  429.603807] ath10k_pci 0000:02:00.0: failed to receive initialized event from target: 00000000
> [  429.603824] ath10k_pci 0000:02:00.0: failed to wait for target init: -110
> [  429.606647] ath10k_pci 0000:02:00.0: failed to delete WMI vdev 1: -108
> [  429.606657] ath10k_pci 0000:02:00.0: failed to set 2g txpower 46: -108
> [  429.606661] ath10k_pci 0000:02:00.0: failed to setup tx power 23: -108
> [  429.606664] ath10k_pci 0000:02:00.0: failed to recalc tx power: -108
> [  429.606855] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 1 ar-state 2): 5000
> [  429.606898] ath10k_pci 0000:02:00.0: failed to flush transmit queue (skip 1 ar-state 2): 5000

You need to report this to Ubuntu. We don't support distro kernels, only
vanilla kernel.org releases.

Adding also ath10k list.

-- 
https://patchwork.kernel.org/project/linux-wireless/list/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches