From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Richard Genoud <richard.genoud@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Gregory CLEMENT <gregory.clement@free-electrons.com>,
Ralph Sennhauser <ralph.sennhauser@gmail.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] clk: mvebu: armada-38x: add support for missing clocks
Date: Thu, 08 Mar 2018 14:23:43 +0100 [thread overview]
Message-ID: <877eqm4s68.fsf@bootlin.com> (raw)
In-Reply-To: <87h8pq4s92.fsf@bootlin.com> (Gregory CLEMENT's message of "Thu, 08 Mar 2018 14:22:01 +0100")
Hi,
On jeu., mars 08 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:
> Hi Richard,
>
> On jeu., mars 08 2018, Richard Genoud <richard.genoud@gmail.com> wrote:
>
>> Clearfog boards can come with a CPU clocked at 1600MHz (commercial)
>> or 1333MHz (industrial).
>>
>> They have also some dip-switches to select a different clock (666, 800,
>> 1066, 1200).
>
> The patch looks goo and it will also be usefull for any other board
> using these frequencies, thanks for this. I have only one small comment,
> see below.
I forgot to mention that you can add my
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Thanks,
Gregory
>
>
>>
>> The funny thing is that the recovery button is on the MPP34 fq selector.
>> So, when booting an industrial board with this button down, the frequency
>> 666MHz is selected (and the kernel didn't boot).
>>
>> This patch add all the missing clocks.
>>
>> The only mode I didn't test is 2GHz (uboot found 4294MHz instead :/ ).
>>
>> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
>> ---
>> drivers/clk/mvebu/armada-38x.c | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/clk/mvebu/armada-38x.c b/drivers/clk/mvebu/armada-38x.c
>> index 394aa6f03f01..9ff4ea63932d 100644
>> --- a/drivers/clk/mvebu/armada-38x.c
>> +++ b/drivers/clk/mvebu/armada-38x.c
>> @@ -46,11 +46,11 @@ static u32 __init armada_38x_get_tclk_freq(void __iomem *sar)
>> }
>>
>> static const u32 armada_38x_cpu_frequencies[] __initconst = {
>> - 0, 0, 0, 0,
>> - 1066 * 1000 * 1000, 0, 0, 0,
>> + 666 * 1000 * 1000, 0, 800 * 1000 * 1000, 0,
>> + 1066 * 1000 * 1000, 0, 1200 * 1000 * 1000, 0,
>> 1332 * 1000 * 1000, 0, 0, 0,
>> 1600 * 1000 * 1000, 0, 0, 0,
>> - 1866 * 1000 * 1000,
>> + 1866 * 1000 * 1000, 0, 0, 2000 * 1000 * 1000,
>
> Maybe you could add a comment here to say that the 2GHz mode didn't have
> been tested.
>
> Thanks,
> Gregory
>
>
>> };
>>
>> static u32 __init armada_38x_get_cpu_freq(void __iomem *sar)
>> @@ -76,11 +76,11 @@ static const struct coreclk_ratio armada_38x_coreclk_ratios[] __initconst = {
>> };
>>
>> static const int armada_38x_cpu_l2_ratios[32][2] __initconst = {
>> - {0, 1}, {0, 1}, {0, 1}, {0, 1},
>> - {1, 2}, {0, 1}, {0, 1}, {0, 1},
>> - {1, 2}, {0, 1}, {0, 1}, {0, 1},
>> + {1, 2}, {0, 1}, {1, 2}, {0, 1},
>> + {1, 2}, {0, 1}, {1, 2}, {0, 1},
>> {1, 2}, {0, 1}, {0, 1}, {0, 1},
>> {1, 2}, {0, 1}, {0, 1}, {0, 1},
>> + {1, 2}, {0, 1}, {0, 1}, {1, 2},
>> {0, 1}, {0, 1}, {0, 1}, {0, 1},
>> {0, 1}, {0, 1}, {0, 1}, {0, 1},
>> {0, 1}, {0, 1}, {0, 1}, {0, 1},
>> @@ -91,7 +91,7 @@ static const int armada_38x_cpu_ddr_ratios[32][2] __initconst = {
>> {1, 2}, {0, 1}, {0, 1}, {0, 1},
>> {1, 2}, {0, 1}, {0, 1}, {0, 1},
>> {1, 2}, {0, 1}, {0, 1}, {0, 1},
>> - {1, 2}, {0, 1}, {0, 1}, {0, 1},
>> + {1, 2}, {0, 1}, {0, 1}, {7, 15},
>> {0, 1}, {0, 1}, {0, 1}, {0, 1},
>> {0, 1}, {0, 1}, {0, 1}, {0, 1},
>> {0, 1}, {0, 1}, {0, 1}, {0, 1},
>
> --
> Gregory Clement, Bootlin (formerly Free Electrons)
> Embedded Linux and Kernel engineering
> http://bootlin.com
--
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
next prev parent reply other threads:[~2018-03-08 13:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-08 9:03 [PATCH] clk: mvebu: armada-38x: add support for missing clocks Richard Genoud
2018-03-08 13:22 ` Gregory CLEMENT
2018-03-08 13:23 ` Gregory CLEMENT [this message]
2018-03-13 10:20 ` Richard Genoud
2018-03-13 10:32 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877eqm4s68.fsf@bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=gregory.clement@free-electrons.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=ralph.sennhauser@gmail.com \
--cc=richard.genoud@gmail.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.