diff for duplicates of <877evpdscc.fsf@kamboji.qca.qualcomm.com>

diff --git a/a/1.txt b/N1/1.txt
index 85440d7..646e195 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -9,31 +9,31 @@ problems. What kind of setup you have?
 
 I tested on a x86 laptop and current ath.git master branch:
 
-ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
-ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
-ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1
-ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.66 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c2dd2ad5
+ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode =
+0
+ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff=
+ sub 0000:0000
+ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode=
+ 1
+ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.66 api 5 features no-p2p,ra=
+w-mode,mfp,allows-mesh-bcast crc32 c2dd2ad5
 ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
 
 And my hostapd.conf:
 
-driver=nl80211
-hw_mode=a
-channel=36
-ieee80211n=1
-interface=wlan0
-ctrl_interface=/var/run/hostapd
-ctrl_interface_group=adm
-ssid=test-psk
-wpa=2
-wpa_key_mgmt=WPA-PSK
-wpa_pairwise=CCMP
-wpa_passphrase=12345678
-
-
--- 
-Kalle Valo
-_______________________________________________
-ath10k mailing list
-ath10k@lists.infradead.org
-http://lists.infradead.org/mailman/listinfo/ath10k
+driver=3Dnl80211
+hw_mode=3Da
+channel=3D36
+ieee80211n=3D1
+interface=3Dwlan0
+ctrl_interface=3D/var/run/hostapd
+ctrl_interface_group=3Dadm
+ssid=3Dtest-psk
+wpa=3D2
+wpa_key_mgmt=3DWPA-PSK
+wpa_pairwise=3DCCMP
+wpa_passphrase=3D12345678
+
+
+--=20
+Kalle Valo=
diff --git a/a/content_digest b/N1/content_digest
index 6ada0d4..10ff7ae 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -5,9 +5,9 @@
  "Subject\0Re: [PATCH] ath10k: rebuild crypto header in RX data frames\0"
  "Date\0Sat, 21 Oct 2017 04:42:44 +0000\0"
  "To\0Jasmine Strong <jas@eero.com>\0"
- "Cc\0linux-wireless@vger.kernel.org <linux-wireless@vger.kernel.org>"
+ "Cc\0Sebastian Gottschall <s.gottschall@dd-wrt.com>"
   ath10k <ath10k@lists.infradead.org>
- " Sebastian Gottschall <s.gottschall@dd-wrt.com>\0"
+ " linux-wireless@vger.kernel.org <linux-wireless@vger.kernel.org>\0"
  "\00:1\0"
  "b\0"
  "Jasmine Strong <jas@eero.com> writes:\n"
@@ -21,33 +21,33 @@
  "\n"
  "I tested on a x86 laptop and current ath.git master branch:\n"
  "\n"
- "ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0\n"
- "ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000\n"
- "ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1\n"
- "ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.66 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c2dd2ad5\n"
+ "ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode =\n"
+ "0\n"
+ "ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff=\n"
+ " sub 0000:0000\n"
+ "ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode=\n"
+ " 1\n"
+ "ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.66 api 5 features no-p2p,ra=\n"
+ "w-mode,mfp,allows-mesh-bcast crc32 c2dd2ad5\n"
  "ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08\n"
  "\n"
  "And my hostapd.conf:\n"
  "\n"
- "driver=nl80211\n"
- "hw_mode=a\n"
- "channel=36\n"
- "ieee80211n=1\n"
- "interface=wlan0\n"
- "ctrl_interface=/var/run/hostapd\n"
- "ctrl_interface_group=adm\n"
- "ssid=test-psk\n"
- "wpa=2\n"
- "wpa_key_mgmt=WPA-PSK\n"
- "wpa_pairwise=CCMP\n"
- "wpa_passphrase=12345678\n"
- "\n"
- "\n"
- "-- \n"
- "Kalle Valo\n"
- "_______________________________________________\n"
- "ath10k mailing list\n"
- "ath10k@lists.infradead.org\n"
- http://lists.infradead.org/mailman/listinfo/ath10k
+ "driver=3Dnl80211\n"
+ "hw_mode=3Da\n"
+ "channel=3D36\n"
+ "ieee80211n=3D1\n"
+ "interface=3Dwlan0\n"
+ "ctrl_interface=3D/var/run/hostapd\n"
+ "ctrl_interface_group=3Dadm\n"
+ "ssid=3Dtest-psk\n"
+ "wpa=3D2\n"
+ "wpa_key_mgmt=3DWPA-PSK\n"
+ "wpa_pairwise=3DCCMP\n"
+ "wpa_passphrase=3D12345678\n"
+ "\n"
+ "\n"
+ "--=20\n"
+ Kalle Valo=
 
-403beffef1eba5047c6bad9a3740cb85ea62c4931017383c945d669a1c8a33dd
+f0ce7bfd7243f1b8524bbd6a1fb6ae50ef42a523abad0baa7f710177f20e45e7
