From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Tue, 18 Jul 2017 15:01:45 +0200 Subject: [PATCH] arm64: dts: marvell: mcbin: add an stdout-path In-Reply-To: <20170717073022.25452-1-antoine.tenart@free-electrons.com> (Antoine Tenart's message of "Mon, 17 Jul 2017 09:30:22 +0200") References: <20170717073022.25452-1-antoine.tenart@free-electrons.com> Message-ID: <877ez599vq.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Antoine, On lun., juil. 17 2017, Antoine Tenart wrote: > This patch adds an stdout-path to the mcbin device tree. This allows to > use earlycon. > > Signed-off-by: Antoine Tenart Applied on mvebu/dt64 Thanks, Gregory > --- > arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > index a4f87faae67b..178fe1fca015 100644 > --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > @@ -51,6 +51,10 @@ > compatible = "marvell,armada8040-mcbin", "marvell,armada8040", > "marvell,armada-ap806-quad", "marvell,armada-ap806"; > > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > memory at 00000000 { > device_type = "memory"; > reg = <0x0 0x0 0x0 0x80000000>; > -- > 2.13.3 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com