From: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
To: David Gibson <david@gibson.dropbear.id.au>,
mpe@ellerman.id.au, paulus@samba.org, benh@kernel.crashing.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
David Gibson <david@gibson.dropbear.id.au>
Subject: Re: [PATCH 2/4] powerpc/mm: Handle removing maybe-present bolted HPTEs
Date: Wed, 10 Feb 2016 14:28:43 +0530 [thread overview]
Message-ID: <877fidx7p8.fsf@linux.vnet.ibm.com> (raw)
In-Reply-To: <1454988763-5580-3-git-send-email-david@gibson.dropbear.id.au>
David Gibson <david@gibson.dropbear.id.au> writes:
> At the moment the hpte_removebolted callback in ppc_md returns void and
> will BUG_ON() if the hpte it's asked to remove doesn't exist in the first
> place. This is awkward for the case of cleaning up a mapping which was
> partially made before failing.
>
> So, we add a return value to hpte_removebolted, and have it return ENOENT
> in the case that the HPTE to remove didn't exist in the first place.
>
> In the (sole) caller, we propagate errors in hpte_removebolted to its
> caller to handle. However, we handle ENOENT specially, continuing to
> complete the unmapping over the specified range before returning the error
> to the caller.
>
> This means that htab_remove_mapping() will work sanely on a partially
> present mapping, removing any HPTEs which are present, while also returning
> ENOENT to its caller in case it's important there.
>
> There are two callers of htab_remove_mapping():
> - In remove_section_mapping() we already WARN_ON() any error return,
> which is reasonable - in this case the mapping should be fully
> present
> - In vmemmap_remove_mapping() we BUG_ON() any error. We change that to
> just a WARN_ON() in the case of ENOENT, since failing to remove a
> mapping that wasn't there in the first place probably shouldn't be
> fatal.
>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
> ---
> arch/powerpc/include/asm/machdep.h | 2 +-
> arch/powerpc/mm/hash_utils_64.c | 15 ++++++++++++---
> arch/powerpc/mm/init_64.c | 9 +++++----
> arch/powerpc/platforms/pseries/lpar.c | 9 ++++++---
> 4 files changed, 24 insertions(+), 11 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
> index 3f191f5..fa25643 100644
> --- a/arch/powerpc/include/asm/machdep.h
> +++ b/arch/powerpc/include/asm/machdep.h
> @@ -54,7 +54,7 @@ struct machdep_calls {
> int psize, int apsize,
> int ssize);
> long (*hpte_remove)(unsigned long hpte_group);
> - void (*hpte_removebolted)(unsigned long ea,
> + int (*hpte_removebolted)(unsigned long ea,
> int psize, int ssize);
> void (*flush_hash_range)(unsigned long number, int local);
> void (*hugepage_invalidate)(unsigned long vsid,
> diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
> index 9f7d727..99fbee0 100644
> --- a/arch/powerpc/mm/hash_utils_64.c
> +++ b/arch/powerpc/mm/hash_utils_64.c
> @@ -269,6 +269,8 @@ int htab_remove_mapping(unsigned long vstart, unsigned long vend,
> {
> unsigned long vaddr;
> unsigned int step, shift;
> + int rc;
> + int ret = 0;
>
> shift = mmu_psize_defs[psize].shift;
> step = 1 << shift;
> @@ -276,10 +278,17 @@ int htab_remove_mapping(unsigned long vstart, unsigned long vend,
> if (!ppc_md.hpte_removebolted)
> return -ENODEV;
>
> - for (vaddr = vstart; vaddr < vend; vaddr += step)
> - ppc_md.hpte_removebolted(vaddr, psize, ssize);
> + for (vaddr = vstart; vaddr < vend; vaddr += step) {
> + rc = ppc_md.hpte_removebolted(vaddr, psize, ssize);
> + if (rc == -ENOENT) {
> + ret = -ENOENT;
> + continue;
> + }
> + if (rc < 0)
> + return rc;
> + }
>
> - return 0;
> + return ret;
> }
> #endif /* CONFIG_MEMORY_HOTPLUG */
>
> diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
> index 379a6a9..baa1a23 100644
> --- a/arch/powerpc/mm/init_64.c
> +++ b/arch/powerpc/mm/init_64.c
> @@ -232,10 +232,11 @@ static void __meminit vmemmap_create_mapping(unsigned long start,
> static void vmemmap_remove_mapping(unsigned long start,
> unsigned long page_size)
> {
> - int mapped = htab_remove_mapping(start, start + page_size,
> - mmu_vmemmap_psize,
> - mmu_kernel_ssize);
> - BUG_ON(mapped < 0);
> + int rc = htab_remove_mapping(start, start + page_size,
> + mmu_vmemmap_psize,
> + mmu_kernel_ssize);
> + BUG_ON((rc < 0) && (rc != -ENOENT));
> + WARN_ON(rc == -ENOENT);
> }
> #endif
>
> diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
> index 477290a..2415a0d 100644
> --- a/arch/powerpc/platforms/pseries/lpar.c
> +++ b/arch/powerpc/platforms/pseries/lpar.c
> @@ -505,8 +505,8 @@ static void pSeries_lpar_hugepage_invalidate(unsigned long vsid,
> }
> #endif
>
> -static void pSeries_lpar_hpte_removebolted(unsigned long ea,
> - int psize, int ssize)
> +static int pSeries_lpar_hpte_removebolted(unsigned long ea,
> + int psize, int ssize)
> {
> unsigned long vpn;
> unsigned long slot, vsid;
> @@ -515,11 +515,14 @@ static void pSeries_lpar_hpte_removebolted(unsigned long ea,
> vpn = hpt_vpn(ea, vsid, ssize);
>
> slot = pSeries_lpar_hpte_find(vpn, psize, ssize);
> - BUG_ON(slot == -1);
> + if (slot == -1)
> + return -ENOENT;
> +
> /*
> * lpar doesn't use the passed actual page size
> */
> pSeries_lpar_hpte_invalidate(slot, vpn, psize, 0, ssize, 0);
> + return 0;
> }
>
> /*
> --
> 2.5.0
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
next prev parent reply other threads:[~2016-02-10 8:58 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-09 3:32 [PATCH 0/4] powerpc/mm: Cleanups to hotplug memory path David Gibson
2016-02-09 3:32 ` [PATCH 1/4] powerpc/mm: Clean up error handling for htab_remove_mapping David Gibson
2016-02-10 8:56 ` Aneesh Kumar K.V
2016-03-01 22:21 ` [1/4] " Michael Ellerman
2016-02-09 3:32 ` [PATCH 2/4] powerpc/mm: Handle removing maybe-present bolted HPTEs David Gibson
2016-02-10 8:58 ` Aneesh Kumar K.V [this message]
2016-03-01 22:21 ` [2/4] " Michael Ellerman
2016-02-09 3:32 ` [PATCH 3/4] powerpc/mm: Clean up memory hotplug failure paths David Gibson
2016-02-10 9:00 ` Aneesh Kumar K.V
2016-03-01 1:59 ` [3/4] " Michael Ellerman
2016-03-01 2:27 ` David Gibson
2016-03-01 22:21 ` Michael Ellerman
2016-02-09 3:32 ` [PATCH 4/4] powerpc/mm: Split hash page table sizing heuristic into a helper David Gibson
2016-02-10 9:01 ` Aneesh Kumar K.V
2016-03-01 22:21 ` [4/4] " Michael Ellerman
2016-03-01 23:26 ` David Gibson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877fidx7p8.fsf@linux.vnet.ibm.com \
--to=aneesh.kumar@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=david@gibson.dropbear.id.au \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.