From: khilman@linaro.org (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: mx6: Add mx6solo support
Date: Tue, 10 Sep 2013 07:42:04 -0700 [thread overview]
Message-ID: <877geohh6r.fsf@linaro.org> (raw)
In-Reply-To: <CAOMZO5D8VW=M_DW69p+p512Uw9eySt+PoM-iWN=m3jXb0tfvaw@mail.gmail.com> (Fabio Estevam's message of "Mon, 9 Sep 2013 18:24:16 -0300")
Fabio Estevam <festevam@gmail.com> writes:
> On Mon, Sep 9, 2013 at 1:19 PM, Robert Nelson <robertcnelson@gmail.com> wrote:
>
>>> Ok, I made this test and it booted fine.
>>>
>>> So I will change U-boot so that it searches for imx6dl-wandboard.dtb
>>> instead of imx6s-wandboard.dtb.
>>
>> Since there is no WiFi/Bluetooth on the "solo" vs the wandboard dual
>> lite, we should really still have a separate solo dtb file..
>
> I think we could still represent the im6solo-wandboard using the
> imx6dl-wandboard.dts.
>
> In the case of lack of bcm4329 populated on a mx6solo board, the SDHC3
> port will just not probe bcm4329 without any negative effect, right?
I've noticed in my auto build/boot[1] that booting a wandboard solo with
imx6dl-wandboard.dtb actually faults[2]. Just disabling usdhc2[3] makes
it boot fine.
This only happens on current linus/HEAD. v3.11 boots fine as does
linux-next (as of next-20130910.)
Kevin
P.S. Thanks to Fabio Estevam and the folks at TexhNexion for donating
Wandboards for my automated build/boot farm. As you'll see in the
build/boot reports[1], A wandboard solo, dual and quad are now part
of the regular boot testing.
[1] build/root reports available here:
http://lists.linaro.org/pipermail/kernel-build-reports/2013-September/thread.html
[2]
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: no vqmmc regulator found
mmc0: no vmmc regulator found
mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
mmc1: no vqmmc regulator found
mmc1: no vmmc regulator found
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = 80004000
[00000000] *pgd=00000000
Internal error: Oops: 17 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.11.0+ #1
task: 9f868000 ti: 9f86a000 task.ti: 9f86a000
PC is at wake_up_process+0xc/0x48
LR is at sdhci_irq+0x74c/0x9f8
pc : [<8004ea48>] lr : [<8042bb98>] psr: 60000193
sp : 9f86bb88 ip : 9f86bba0 fp : 9f86bb9c
r10: 9f8079c0 r9 : 00000100 r8 : 00000037
r7 : 00000000 r6 : 00000000 r5 : 00000001 r4 : 9f9df800
r3 : 00000001 r2 : 00000002 r1 : 20000193 r0 : 00000000
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: 2f14004a DAC: 00000017
Process swapper/0 (pid: 1, stack limit = 0x9f86a240)
Stack: (0x9f86bb88 to 0x9f86c000)
bb80: 00000001 9f9df800 9f86bbe4 9f86bba0 8042bb98 8004ea48
bba0: 00000000 9f80fe80 9f86bbcc 00000000 00000001 00000000 00000000 9f12a140
bbc0: 00000001 00000000 00000000 00000037 808257ff 9f8079c0 9f86bc1c 9f86bbe8
bbe0: 8007ae8c 8042b458 80829bbc 00004027 9f86bc14 9f8079c0 00000001 9f86a000
bc00: 00000037 00000000 9f8079f4 00000037 9f86bc34 9f86bc20 8007b020 8007ae44
bc20: 9f8079c0 00000001 9f86bc4c 9f86bc38 8007e1c8 8007afe0 00000037 807dcd8c
bc40: 9f86bc64 9f86bc50 8007a808 8007e138 00000180 807e6bb8 9f86bc8c 9f86bc68
bc60: 8000f1d8 8007a7ec 000000a0 f400010c 807e6d04 9f86bcb0 f4000100 60000013
bc80: 9f86bcac 9f86bc90 800085d8 8000f190 805c1aac 60000013 ffffffff 9f86bce4
bca0: 9f86bd04 9f86bcb0 80012c40 800085b4 9f807a14 60000013 00000007 00000000
bcc0: 9f8079c0 9f12a140 9f807a14 00000080 60000013 9f8079f4 00000037 9f86bd04
bce0: 9f86bd08 9f86bcf8 8007c67c 805c1aac 60000013 ffffffff 9f86bd44 9f86bd08
bd00: 8007c67c 805c1a8c 00000000 000080d0 00003ede 00000001 9f86bd34 9f12a140
bd20: 9f8079c0 8042b44c 00000080 00000037 00000000 9f9dfac0 9f86bd74 9f86bd48
bd40: 8007c9b4 8007c460 00000080 00000000 9f9dfc00 9f9dfac0 9f9df800 9f9dfbec
bd60: 9f86a000 00000800 9f86bda4 9f86bd78 8042cec8 8007c914 9f128f40 9f9dfac0
bd80: 9f126990 9f9dfac0 80ccf124 9f904000 9f824080 807cf5ec 9f86bdd4 9f86bda8
bda0: 8042e5d4 8042c848 9f86bdc4 9f86bdb8 8012d604 80875df8 9f904010 00000000
bdc0: 808175f8 807bb0b8 9f86bde4 9f86bdd8 80301c48 8042e348 9f86be04 9f86bde8
bde0: 803008f0 80301c34 9f904010 808175f8 9f904044 00000000 9f86be24 9f86be08
be00: 80300a9c 803007f0 9f83b55c 00000000 808175f8 80300a08 9f86be4c 9f86be28
be20: 802fed34 80300a14 9f83b55c 9f9030b4 9f83b570 808175f8 9f126300 80805548
be40: 9f86be5c 9f86be50 803003e4 802fece4 9f86be8c 9f86be60 802fff24 803003d0
be60: 80740bfc 80825980 9f86be8c 808175f8 00000006 80825980 8078d46c 807bb0b8
be80: 9f86bea4 9f86be90 80301160 802ffe54 807db588 00000006 9f86beb4 9f86bea8
bea0: 80301e64 803010ec 9f86bec4 9f86beb8 807bb0d0 80301e20 9f86bf54 9f86bec8
bec0: 80008898 807bb0c4 9f86bf0c 9f86bed8 805c145c 00000000 00100100 807f33fc
bee0: 9f86bf0c 9f86bef0 8078d400 80277164 8078d46c 80cd132d 805daf18 000000bd
bf00: 9f86bf54 9f86bf10 80040a8c 8078d478 00000000 00000006 00000006 8078a57c
bf20: 00000000 8073581c 9f86bf54 807db588 00000006 80825980 8078d46c 000000bd
bf40: 807cf5e0 807cf5ec 9f86bf94 9f86bf58 8078dc10 800087b0 00000006 00000006
bf60: 8078d46c 00000000 00000000 00000000 805b6c10 00000000 00000000 00000000
bf80: 00000000 00000000 9f86bfac 9f86bf98 805b6c20 8078db18 ffffffff 00000000
bfa0: 00000000 9f86bfb0 8000e978 805b6c1c 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
Backtrace:
[<8004ea3c>] (wake_up_process+0x0/0x48) from [<8042bb98>] (sdhci_irq+0x74c/0x9f8)
r4:9f9df800 r3:00000001
[<8042b44c>] (sdhci_irq+0x0/0x9f8) from [<8007ae8c>] (handle_irq_event_percpu+0x54/0x19c)
[<8007ae38>] (handle_irq_event_percpu+0x0/0x19c) from [<8007b020>] (handle_irq_event+0x4c/0x6c)
[<8007afd4>] (handle_irq_event+0x0/0x6c) from [<8007e1c8>] (handle_fasteoi_irq+0x9c/0x170)
r5:00000001 r4:9f8079c0
[<8007e12c>] (handle_fasteoi_irq+0x0/0x170) from [<8007a808>] (generic_handle_irq+0x28/0x38)
r5:807dcd8c r4:00000037
[<8007a7e0>] (generic_handle_irq+0x0/0x38) from [<8000f1d8>] (handle_IRQ+0x54/0xb8)
r4:807e6bb8 r3:00000180
[<8000f184>] (handle_IRQ+0x0/0xb8) from [<800085d8>] (gic_handle_irq+0x30/0x64)
r8:60000013 r7:f4000100 r6:9f86bcb0 r5:807e6d04 r4:f400010c
r3:000000a0
[<800085a8>] (gic_handle_irq+0x0/0x64) from [<80012c40>] (__irq_svc+0x40/0x54)
Exception stack(0x9f86bcb0 to 0x9f86bcf8)
bca0: 9f807a14 60000013 00000007 00000000
bcc0: 9f8079c0 9f12a140 9f807a14 00000080 60000013 9f8079f4 00000037 9f86bd04
bce0: 9f86bd08 9f86bcf8 8007c67c 805c1aac 60000013 ffffffff
r7:9f86bce4 r6:ffffffff r5:60000013 r4:805c1aac
[<805c1a80>] (_raw_spin_unlock_irqrestore+0x0/0x30) from [<8007c67c>] (__setup_irq+0x228/0x4b4)
[<8007c454>] (__setup_irq+0x0/0x4b4) from [<8007c9b4>] (request_threaded_irq+0xac/0x138)
[<8007c908>] (request_threaded_irq+0x0/0x138) from [<8042cec8>] (sdhci_add_host+0x68c/0xba4)
[<8042c83c>] (sdhci_add_host+0x0/0xba4) from [<8042e5d4>] (sdhci_esdhc_imx_probe+0x298/0x508)
[<8042e33c>] (sdhci_esdhc_imx_probe+0x0/0x508) from [<80301c48>] (platform_drv_probe+0x20/0x24)
r8:807bb0b8 r7:808175f8 r6:00000000 r5:9f904010 r4:80875df8
[<80301c28>] (platform_drv_probe+0x0/0x24) from [<803008f0>] (driver_probe_device+0x10c/0x224)
[<803007e4>] (driver_probe_device+0x0/0x224) from [<80300a9c>] (__driver_attach+0x94/0x98)
r7:00000000 r6:9f904044 r5:808175f8 r4:9f904010
[<80300a08>] (__driver_attach+0x0/0x98) from [<802fed34>] (bus_for_each_dev+0x5c/0x90)
r6:80300a08 r5:808175f8 r4:00000000 r3:9f83b55c
[<802fecd8>] (bus_for_each_dev+0x0/0x90) from [<803003e4>] (driver_attach+0x20/0x28)
r6:80805548 r5:9f126300 r4:808175f8
[<803003c4>] (driver_attach+0x0/0x28) from [<802fff24>] (bus_add_driver+0xdc/0x264)
[<802ffe48>] (bus_add_driver+0x0/0x264) from [<80301160>] (driver_register+0x80/0xfc)
r8:807bb0b8 r7:8078d46c r6:80825980 r5:00000006 r4:808175f8
[<803010e0>] (driver_register+0x0/0xfc) from [<80301e64>] (__platform_driver_register+0x50/0x64)
r5:00000006 r4:807db588
[<80301e14>] (__platform_driver_register+0x0/0x64) from [<807bb0d0>] (sdhci_esdhc_imx_driver_init+0x18/0x20)
[<807bb0b8>] (sdhci_esdhc_imx_driver_init+0x0/0x20) from [<80008898>] (do_one_initcall+0xf4/0x154)
[<800087a4>] (do_one_initcall+0x0/0x154) from [<8078dc10>] (kernel_init_freeable+0x104/0x1d0)
[<8078db0c>] (kernel_init_freeable+0x0/0x1d0) from [<805b6c20>] (kernel_init+0x10/0xec)
[<805b6c10>] (kernel_init+0x0/0xec) from [<8000e978>] (ret_from_fork+0x14/0x3c)
r4:00000000 r3:ffffffff
Code: e89da800 e1a0c00d e92dd818 e24cb004 (e5903000)
---[ end trace a890b0bf17e153b1 ]---
[3]
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index a55113e..8d80181 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -126,7 +126,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_2>;
non-removable;
- status = "okay";
+ status = "disabled";
};
&usdhc3 {
next prev parent reply other threads:[~2013-09-10 14:42 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-09 1:00 [PATCH 1/2] ARM: dts: mx6: Add mx6solo support Fabio Estevam
2013-09-09 1:00 ` [PATCH 2/2] ARM: dts: Add imx6s-wandboard support Fabio Estevam
2013-09-09 15:08 ` [PATCH 1/2] ARM: dts: mx6: Add mx6solo support Shawn Guo
2013-09-09 15:59 ` Fabio Estevam
2013-09-09 16:19 ` Robert Nelson
2013-09-09 21:24 ` Fabio Estevam
2013-09-10 14:42 ` Kevin Hilman [this message]
2013-09-10 15:05 ` Shawn Guo
2013-09-10 15:15 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877geohh6r.fsf@linaro.org \
--to=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.