From: Konstantin Kletschke <lists@ku-gbr.de>
To: "Artem B. Bityutskiy" <dedekind@yandex.ru>
Cc: linux-mtd@lists.infradead.org
Subject: Re: Inode #274 was a directory with children - removing those too...
Date: Wed, 28 Sep 2005 13:54:50 +0200 [thread overview]
Message-ID: <877jd176gl.wl%kletschke@synertronixx.de> (raw)
In-Reply-To: <878xxh77zp.wl%kletschke@synertronixx.de>
[-- Attachment #1: Type: text/plain, Size: 2660 bytes --]
At Wed, 28 Sep 2005 13:21:46 +0200,
Konstantin Kletschke <lists@ku-gbr.de> wrote:
> It happens on a virgin created image. After that on every mount.
> The partition is used as /.
I did some further debugging:
konsti@synertronixx3:/usr/src/buildroot$ ls -laR
build_arm/root/etc/network/
build_arm/root/etc/network/:
total 8
drwxr-xr-x 3 konsti konsti 41 2005-09-28 09:51 .
drwxr-xr-x 4 konsti konsti 4096 2005-09-28 09:51 ..
drwxrwxr-x 2 konsti konsti 33 2005-08-26 15:42 if-pre-up.d
-rw-r--r-- 1 konsti konsti 1618 2005-09-28 11:09 interfaces
build_arm/root/etc/network/if-pre-up.d:
total 8
drwxrwxr-x 2 konsti konsti 33 2005-08-26 15:42 .
drwxr-xr-x 3 konsti konsti 41 2005-09-28 09:51 ..
-rwxr-xr-x 1 konsti konsti 6027 2005-08-26 15:42 linux-wlan-ng-pre-up
Then:
/usr/src/buildroot/toolchain_build_arm/mtd-20050122.orig/util/mkfs.jffs2\
-e 0x20000 -l \
-d /usr/src/buildroot/build_arm/root \
-o /usr/src/buildroot/root_fs_arm.jffs2 \
-D target/scb9328/device_table.txt
On Target:
# ls -laR /etc/network/
/etc/network/:
drwxr-xr-x 6 default default 0 Sep 28 2005 .
drwxr-xr-x 5 default default 0 Jan 1 00:00 ..
drwxr-xr-x 2 root root 0 Sep 28 2005 if-down.d
drwxr-xr-x 2 root root 0 Sep 28 2005 if-post-down.d
drwxr-xr-x 2 root root 0 Aug 26 2005 if-pre-up.d
drwxr-xr-x 2 root root 0 Sep 28 2005 if-up.d
-rw-r--r-- 1 default default 1618 Sep 28 2005 interfaces
/etc/network/if-down.d:
drwxr-xr-x 2 root root 0 Sep 28 2005 .
drwxr-xr-x 6 default default 0 Sep 28 2005 ..
/etc/network/if-post-down.d:
drwxr-xr-x 2 root root 0 Sep 28 2005 .
drwxr-xr-x 6 default default 0 Sep 28 2005 ..
/etc/network/if-pre-up.d:
drwxr-xr-x 2 root root 0 Aug 26 2005 .
drwxr-xr-x 6 default default 0 Sep 28 2005 ..
/etc/network/if-up.d:
drwxr-xr-x 2 root root 0 Sep 28 2005 .
drwxr-xr-x 6 default default 0 Sep 28 2005 ..
#
With this devicetable:
/etc/network/if-up.d d 755 0 0
- - - - -
/etc/network/if-pre-up.d d 755 0 0
- - - - -
/etc/network/if-down.d d 755 0 0
- - - - -
/etc/network/if-post-down.d d 755 0 0
- - - - -
I attach jffs2dump because I am not able to convince emacs to not
linebreak it, it looks unuseable broken at 72 chars.
Konsti
[-- Attachment #2: less --]
[-- Type: application/octet-stream, Size: 5520 bytes --]
Inode node at 0x0007e42c, totlen 0x00000799, #ino 266, version 1, isize 10873, csize 1877, dsize 4096, offset 0
Inode node at 0x0007ebc8, totlen 0x0000073e, #ino 266, version 2, isize 10873, csize 1786, dsize 4096, offset 4096
Inode node at 0x0007f308, totlen 0x000003f3, #ino 266, version 3, isize 10873, csize 943, dsize 2681, offset 8192
Dirent node at 0x0007f6fc, totlen 0x0000002e, #pino 4, version 265, #ino 267, nsize 6, name shadow
Inode node at 0x0007f72c, totlen 0x000000b3, #ino 267, version 1, isize 321, csize 111, dsize 321, offset 0
Dirent node at 0x0007f7e0, totlen 0x0000002e, #pino 4, version 266, #ino 268, nsize 6, name shadow
Inode node at 0x0007f810, totlen 0x000000b3, #ino 268, version 1, isize 321, csize 111, dsize 321, offset 0
Dirent node at 0x0007f8c4, totlen 0x0000002e, #pino 4, version 267, #ino 269, nsize 6, name passwd
Inode node at 0x0007f8f4, totlen 0x00000137, #ino 269, version 1, isize 489, csize 243, dsize 489, offset 0
Dirent node at 0x0007fa2c, totlen 0x00000032, #pino 254, version 268, #ino 270, nsize 10, name S20urandom
Inode node at 0x0007fa60, totlen 0x00000270, #ino 270, version 1, isize 1108, csize 556, dsize 1108, offset 0
Dirent node at 0x0007fcd0, totlen 0x00000032, #pino 254, version 269, #ino 271, nsize 10, name S40network
Inode node at 0x0007fd04, totlen 0x00000112, #ino 271, version 1, isize 340, csize 206, dsize 340, offset 0
Dirent node at 0x0007fe18, totlen 0x00000033, #pino 254, version 270, #ino 272, nsize 11, name S50dropbear
Inode node at 0x0007fe4c, totlen 0x000001af, #ino 272, version 1, isize 1007, csize 363, dsize 734, offset 0
Inode node at 0x0008000c, totlen 0x00000104, #ino 272, version 2, isize 1007, csize 192, dsize 273, offset 734
Dirent node at 0x00080110, totlen 0x0000002b, #pino 254, version 271, #ino 273, nsize 3, name rcS
Inode node at 0x0008013c, totlen 0x0000015c, #ino 273, version 1, isize 408, csize 280, dsize 408, offset 0
Dirent node at 0x00080298, totlen 0x00000033, #pino 259, version 272, #ino 274, nsize 11, name if-pre-up.d
Inode node at 0x000802cc, totlen 0x00000044, #ino 274, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x00080310, totlen 0x00000032, #pino 259, version 273, #ino 275, nsize 10, name interfaces
Inode node at 0x00080344, totlen 0x0000034a, #ino 275, version 1, isize 1618, csize 774, dsize 1618, offset 0
Dirent node at 0x00080690, totlen 0x0000002f, #pino 259, version 274, #ino 276, nsize 7, name if-up.d
Inode node at 0x000806c0, totlen 0x00000044, #ino 276, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x00080704, totlen 0x00000033, #pino 259, version 275, #ino 277, nsize 11, name if-pre-up.d
Inode node at 0x00080738, totlen 0x00000044, #ino 277, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x0008077c, totlen 0x00000031, #pino 259, version 276, #ino 278, nsize 9, name if-down.d
Inode node at 0x000807b0, totlen 0x00000044, #ino 278, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x000807f4, totlen 0x00000036, #pino 259, version 277, #ino 279, nsize 14, name if-post-down.d
Inode node at 0x0008082c, totlen 0x00000044, #ino 279, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x00080870, totlen 0x0000003c, #pino 274, version 278, #ino 280, nsize 20, name linux-wlan-ng-pre-up
Inode node at 0x000808ac, totlen 0x0000065b, #ino 280, version 1, isize 6027, csize 1559, dsize 4096, offset 0
Inode node at 0x00080f08, totlen 0x000002e8, #ino 280, version 2, isize 6027, csize 676, dsize 1931, offset 4096
Dirent node at 0x000811f0, totlen 0x0000002f, #pino 5, version 279, #ino 281, nsize 7, name default
Inode node at 0x00081220, totlen 0x00000044, #ino 281, version 1, isize 0, csize 0, dsize 0, offset 0
Dirent node at 0x00081264, totlen 0x0000003b, #pino 6, version 280, #ino 282, nsize 19, name ld-uClibc-0.9.27.so
Inode node at 0x000812a0, totlen 0x000008b1, #ino 282, version 1, isize 19452, csize 2157, dsize 4096, offset 0
Inode node at 0x00081b54, totlen 0x00000a7e, #ino 282, version 2, isize 19452, csize 2618, dsize 4096, offset 4096
[-- Attachment #3: Type: text/plain, Size: 90 bytes --]
--
GPG KeyID EF62FCEF
Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF
prev parent reply other threads:[~2005-09-28 11:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-28 10:38 Inode #274 was a directory with children - removing those too Konstantin Kletschke
2005-09-28 10:50 ` Artem B. Bityutskiy
2005-09-28 11:21 ` Konstantin Kletschke
2005-09-28 11:36 ` Artem B. Bityutskiy
2005-09-28 11:55 ` Konstantin Kletschke
2005-09-28 11:54 ` Konstantin Kletschke [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=877jd176gl.wl%kletschke@synertronixx.de \
--to=lists@ku-gbr.de \
--cc=dedekind@yandex.ru \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.