diff for duplicates of <878ttl9f7v.fsf@aikidev.net> diff --git a/a/1.txt b/N1/1.txt index 5c50786..5377790 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,7 @@ On 2016-10-18, Paul Kocialkowski wrote: -> Le mardi 18 octobre 2016 à 11:21 +0200, Heiko Stübner a écrit : +> Le mardi 18 octobre 2016 ? 11:21 +0200, Heiko St?bner a ?crit?: >> Am Sonntag, 16. Oktober 2016, 21:49:43 schrieb Paul Kocialkowski: ->> > Le mardi 27 septembre 2016 à 13:53 -0700, Vagrant Cascadian a écrit : +>> > Le mardi 27 septembre 2016 ? 13:53 -0700, Vagrant Cascadian a ?crit : >> > > >> > > This essentially mimics what was done with rk3288-veyron-minnie in >> > > commit 984926781122f034d5bc9962815d135b6c4a8e1d. @@ -10,33 +10,33 @@ On 2016-10-18, Paul Kocialkowski wrote: >> > > workaround, as it frequently fails to recognize the eMMC without it. >> > >> > I have a device where (without this patch) eMMC sometimes fails, with: ->> > [ 3.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to ->> > 175 [ 3.571742] mmc2: new HS200 MMC card at address 0001 ->> > [ 3.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB ->> > [ 3.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB ->> > [ 3.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB ->> > [ 3.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB ->> > [ 3.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd +>> > [????3.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to +>> > 175 [????3.571742] mmc2: new HS200 MMC card at address 0001 +>> > [????3.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB? +>> > [????3.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB +>> > [????3.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB +>> > [????3.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB +>> > [????3.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd >> > response 0x900, card status 0x0 >> > And sometimes works, with: ->> > [ 3.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to ->> > 176 [ 3.491093] mmc2: new HS200 MMC card at address 0001 ->> > [ 3.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB ->> > [ 3.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB ->> > [ 3.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB ->> > [ 3.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB ->> > [ 3.493548] mmcblk2: p1 p2 +>> > [????3.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to +>> > 176 [????3.491093] mmc2: new HS200 MMC card at address 0001 +>> > [????3.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB? +>> > [????3.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB +>> > [????3.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB +>> > [????3.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB +>> > [????3.493548]??mmcblk2: p1 p2 This is similar behavior to my veyron-speedy. Here are several boot logs -From running 4.8.0-rc7, with some failures and some successes: +>From running 4.8.0-rc7, with some failures and some successes: https://cascadia.aikidev.net/~vagrant/veyron-speedy/ >> > However, with this change, it always fails, with: ->> > [ 3.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req ->> > 52000000Hz, actual 50000000HZ div = 0) [ 3.333174] mmc2: error -110 +>> > [????3.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req +>> > 52000000Hz, actual 50000000HZ div = 0) [????3.333174] mmc2: error -110 >> > whilst initialising MMC card >> > >> > I don't have so much time to investigate this issue, but it's clear that @@ -45,8 +45,8 @@ From running 4.8.0-rc7, with some failures and some successes: Well, that makes things more complicated. ->> As discussed on IRC we now have varying reports of the emmc working or not ->> working with and without that patch applied. So it's not really a bandaid fix +>> As discussed on IRC we now have varying reports of the emmc working or not? +>> working with and without that patch applied. So it's not really a bandaid fix? >> and I've thus dropped this patch again. > > Thanks for dropping it! For the record, my eMMC shows up as: @@ -70,3 +70,10 @@ it's marked as C201PA-DS02-LG. live well, vagrant +-------------- next part -------------- +A non-text attachment was scrubbed... +Name: signature.asc +Type: application/pgp-signature +Size: 800 bytes +Desc: not available +URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161018/643b245b/attachment.sig> diff --git a/a/2.bin b/a/2.bin deleted file mode 100644 index 94ee56b..0000000 --- a/a/2.bin +++ /dev/null @@ -1,16 +0,0 @@ ------BEGIN PGP SIGNATURE----- - -iQIcBAEBCgAGBQJYBuu0AAoJELeLgtSBS5G2PY0P/2Y9TGB784kgR3u1Csw5tH+v -kFjjTKNVy0lFuSIbRdrUvTorq5rMG+imDH/7PVwhOsznstdHiLDMlkVhKYmpkWZ9 -h1/xN1yFXCRX49vzO0JJXz0JIyAkcyFHBkNSWkAAN3jv6/Wm46Ei6FdwRsc3xU49 -Jmfui5fjwth6Bgc7C10z7IKSY5g8rnE+A1ri3YX5gGtmYMa8F498tI7ULT/Y59+p -Vlbaa2tELwRsi2DcGmZspqzvO6jsXeDP/nhZ7w98g7eX3VxdaAbYkYcVGChPIII1 -QZeMbJzt8eKVNypB8jup5qNLcIcq1KDQsT2d68Ib5lpWGJP7RYr9uZPMB22d9hbx -pcA4ri3XvSZKvn0Qf8u4DJeNn1V+yoJdMtqx7tY6tC2O609rjv7UBkAUqJw8WDIA -oy3YlezhvseWS8U/2QroNvxvtBj9pAfNfrtP7BULj36TIOCkZdavuP7uBf/viK3f -DKt1KSepZaJFCzwAa17OGBbpaNqib4AJ4Juj+Jzz1I0Dbi7mc4D5jFkXSIxGt8FR -s/9Ys513JCl+goPK8ns9xxzHLAcc5PPKK6FKyAvQNgzfEIaiioX9vREdstKYvtZK -Pb4WL/pmz5hdto0J9a2jBAepnETPOnR3ZxbeNjjVl1YTUvIJnsyI+HHmayc87s2w -mvnbJPFZG2WGVd3PthOh -=cE5v ------END PGP SIGNATURE----- diff --git a/a/2.hdr b/a/2.hdr deleted file mode 100644 index 5e5352c..0000000 --- a/a/2.hdr +++ /dev/null @@ -1 +0,0 @@ -Content-Type: application/pgp-signature; name="signature.asc" diff --git a/a/content_digest b/N1/content_digest index e9e0750..2ffb255 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -2,24 +2,16 @@ "ref\01476647383.3885.3.camel@paulk.fr\0" "ref\012872023.2LumKfgYDl@diego\0" "ref\01476824417.1031.9.camel@paulk.fr\0" - "From\0Vagrant Cascadian <vagrantc@aikidev.net>\0" - "Subject\0Re: [PATCH v2] ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288-veyron-speedy.\0" + "From\0vagrantc@aikidev.net (Vagrant Cascadian)\0" + "Subject\0[PATCH v2] ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288-veyron-speedy.\0" "Date\0Tue, 18 Oct 2016 20:42:44 -0700\0" - "To\0Paul Kocialkowski <contact@paulk.fr>" - " Heiko St\303\274bner <heiko@sntech.de>\0" - "Cc\0Mark Rutland <mark.rutland@arm.com>" - devicetree@vger.kernel.org - Russell King <linux@armlinux.org.uk> - linux-kernel@vger.kernel.org - linux-rockchip@lists.infradead.org - Rob Herring <robh+dt@kernel.org> - " linux-arm-kernel@lists.infradead.org\0" - "\01:1\0" + "To\0linux-arm-kernel@lists.infradead.org\0" + "\00:1\0" "b\0" "On 2016-10-18, Paul Kocialkowski wrote:\n" - "> Le mardi 18 octobre 2016 \303\240 11:21 +0200, Heiko St\303\274bner a \303\251crit\302\240:\n" + "> Le mardi 18 octobre 2016 ? 11:21 +0200, Heiko St?bner a ?crit?:\n" ">> Am Sonntag, 16. Oktober 2016, 21:49:43 schrieb Paul Kocialkowski:\n" - ">> > Le mardi 27 septembre 2016 \303\240 13:53 -0700, Vagrant Cascadian a \303\251crit :\n" + ">> > Le mardi 27 septembre 2016 ? 13:53 -0700, Vagrant Cascadian a ?crit :\n" ">> > > \n" ">> > > This essentially mimics what was done with rk3288-veyron-minnie in\n" ">> > > commit 984926781122f034d5bc9962815d135b6c4a8e1d.\n" @@ -28,33 +20,33 @@ ">> > > workaround, as it frequently fails to recognize the eMMC without it.\n" ">> > \n" ">> > I have a device where (without this patch) eMMC sometimes fails, with:\n" - ">> > [\302\240\302\240\302\240\302\2403.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to\n" - ">> > 175 [\302\240\302\240\302\240\302\2403.571742] mmc2: new HS200 MMC card at address 0001\n" - ">> > [\302\240\302\240\302\240\302\2403.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB\302\240\n" - ">> > [\302\240\302\240\302\240\302\2403.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB\n" - ">> > [\302\240\302\240\302\240\302\2403.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB\n" - ">> > [\302\240\302\240\302\240\302\2403.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB\n" - ">> > [\302\240\302\240\302\240\302\2403.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd\n" + ">> > [????3.561010] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to\n" + ">> > 175 [????3.571742] mmc2: new HS200 MMC card at address 0001\n" + ">> > [????3.571943] mmcblk2: mmc2:0001 HAG2e 14.7 GiB?\n" + ">> > [????3.572026] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB\n" + ">> > [????3.572107] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB\n" + ">> > [????3.572181] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB\n" + ">> > [????3.685647] mmcblk2: error -110 transferring data, sector 0, nr 8, cmd\n" ">> > response 0x900, card status 0x0\n" "\n" ">> > And sometimes works, with:\n" - ">> > [\302\240\302\240\302\240\302\2403.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to\n" - ">> > 176 [\302\240\302\240\302\240\302\2403.491093] mmc2: new HS200 MMC card at address 0001\n" - ">> > [\302\240\302\240\302\240\302\2403.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB\302\240\n" - ">> > [\302\240\302\240\302\240\302\2403.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB\n" - ">> > [\302\240\302\240\302\240\302\2403.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB\n" - ">> > [\302\240\302\240\302\240\302\2403.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB\n" - ">> > [\302\240\302\240\302\240\302\2403.493548]\302\240\302\240mmcblk2: p1 p2\n" + ">> > [????3.451058] dwmmc_rockchip ff0f0000.dwmmc: Successfully tuned phase to\n" + ">> > 176 [????3.491093] mmc2: new HS200 MMC card at address 0001\n" + ">> > [????3.491277] mmcblk2: mmc2:0001 HAG2e 14.7 GiB?\n" + ">> > [????3.491345] mmcblk2boot0: mmc2:0001 HAG2e partition 1 4.00 MiB\n" + ">> > [????3.491409] mmcblk2boot1: mmc2:0001 HAG2e partition 2 4.00 MiB\n" + ">> > [????3.491474] mmcblk2rpmb: mmc2:0001 HAG2e partition 3 4.00 MiB\n" + ">> > [????3.493548]??mmcblk2: p1 p2\n" "\n" "This is similar behavior to my veyron-speedy. Here are several boot logs\n" - "From running 4.8.0-rc7, with some failures and some successes:\n" + ">From running 4.8.0-rc7, with some failures and some successes:\n" "\n" " https://cascadia.aikidev.net/~vagrant/veyron-speedy/\n" "\n" "\n" ">> > However, with this change, it always fails, with:\n" - ">> > [\302\240\302\240\302\240\302\2403.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req\n" - ">> > 52000000Hz, actual 50000000HZ div = 0) [\302\240\302\240\302\240\302\2403.333174] mmc2: error -110\n" + ">> > [????3.322129] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req\n" + ">> > 52000000Hz, actual 50000000HZ div = 0) [????3.333174] mmc2: error -110\n" ">> > whilst initialising MMC card\n" ">> > \n" ">> > I don't have so much time to investigate this issue, but it's clear that\n" @@ -63,8 +55,8 @@ "Well, that makes things more complicated.\n" "\n" "\n" - ">> As discussed on IRC we now have varying reports of the emmc working or not\302\240\n" - ">> working with and without that patch applied. So it's not really a bandaid fix\302\240\n" + ">> As discussed on IRC we now have varying reports of the emmc working or not?\n" + ">> working with and without that patch applied. So it's not really a bandaid fix?\n" ">> and I've thus dropped this patch again.\n" ">\n" "> Thanks for dropping it! For the record, my eMMC shows up as:\n" @@ -87,25 +79,13 @@ "\n" "\n" "live well,\n" - vagrant - "\01:2\0" - "fn\0signature.asc\0" - "b\0" - "-----BEGIN PGP SIGNATURE-----\n" - "\n" - "iQIcBAEBCgAGBQJYBuu0AAoJELeLgtSBS5G2PY0P/2Y9TGB784kgR3u1Csw5tH+v\n" - "kFjjTKNVy0lFuSIbRdrUvTorq5rMG+imDH/7PVwhOsznstdHiLDMlkVhKYmpkWZ9\n" - "h1/xN1yFXCRX49vzO0JJXz0JIyAkcyFHBkNSWkAAN3jv6/Wm46Ei6FdwRsc3xU49\n" - "Jmfui5fjwth6Bgc7C10z7IKSY5g8rnE+A1ri3YX5gGtmYMa8F498tI7ULT/Y59+p\n" - "Vlbaa2tELwRsi2DcGmZspqzvO6jsXeDP/nhZ7w98g7eX3VxdaAbYkYcVGChPIII1\n" - "QZeMbJzt8eKVNypB8jup5qNLcIcq1KDQsT2d68Ib5lpWGJP7RYr9uZPMB22d9hbx\n" - "pcA4ri3XvSZKvn0Qf8u4DJeNn1V+yoJdMtqx7tY6tC2O609rjv7UBkAUqJw8WDIA\n" - "oy3YlezhvseWS8U/2QroNvxvtBj9pAfNfrtP7BULj36TIOCkZdavuP7uBf/viK3f\n" - "DKt1KSepZaJFCzwAa17OGBbpaNqib4AJ4Juj+Jzz1I0Dbi7mc4D5jFkXSIxGt8FR\n" - "s/9Ys513JCl+goPK8ns9xxzHLAcc5PPKK6FKyAvQNgzfEIaiioX9vREdstKYvtZK\n" - "Pb4WL/pmz5hdto0J9a2jBAepnETPOnR3ZxbeNjjVl1YTUvIJnsyI+HHmayc87s2w\n" - "mvnbJPFZG2WGVd3PthOh\n" - "=cE5v\n" - -----END PGP SIGNATURE----- + " vagrant\n" + "-------------- next part --------------\n" + "A non-text attachment was scrubbed...\n" + "Name: signature.asc\n" + "Type: application/pgp-signature\n" + "Size: 800 bytes\n" + "Desc: not available\n" + URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20161018/643b245b/attachment.sig> -fd7d6536395eac004642585bf10104763ecb3cd6edafcb3ad2476f5579f92c68 +e1edddec0988ddbfbd1355d7835e9316ec2fb300e11187079b1b1b092e44bff4
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.