From: Alex Romosan <romosan@sycorax.lbl.gov>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless@vger.kernel.org
Subject: Re: iwlwifi unable to reconnect after suspend since v3.9-rc1
Date: Wed, 27 Mar 2013 11:58:26 -0700 [thread overview]
Message-ID: <878v58oejx.fsf@sycorax.lbl.gov> (raw)
In-Reply-To: <1364406895.8388.14.camel@jlt4.sipsolutions.net> (message from Johannes Berg on Wed, 27 Mar 2013 18:54:55 +0100)
Johannes Berg <johannes@sipsolutions.net> writes:
> Ok, well, that doesn't tell us all that much since you don't have
> sub-second timestamps. Maybe you can enable printk timestamps:
>
> echo Y > /sys/module/printk/parameters/time
in case it helps. first the logs when the card connected on startup:
[ 18.198708] wlan0: authenticate with xx:xx:xx:xx:xx:xx
[ 18.236585] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[ 18.255020] wlan0: authenticated
[ 18.271878] wlan0: associate with xx:xx:xx:xx:xx:xx (try 1/3)
[ 18.273285] wlan0: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x401 status=0 aid=1)
[ 18.275783] wlan0: associated
and then when i took the interface down and tried to bring it back up:
[ 135.930592] wlan0: deauthenticating from xx:xx:xx:xx:xx:xx by local choice (reason=3)
[ 135.938013] cfg80211: Calling CRDA to update world regulatory domain
[ 135.951043] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 135.951274] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 136.072911] cfg80211: World regulatory domain updated:
[ 136.072924] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 136.072932] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.072938] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 136.072944] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 136.072949] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.072955] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 144.804742] wlan0: authenticate with xx:xx:xx:xx:xx:xx
[ 144.816187] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
[ 144.821469] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 2/3)
[ 144.826866] wlan0: send auth to xx:xx:xx:xx:xx:xx (try 3/3)
[ 144.832539] wlan0: authentication with xx:xx:xx:xx:xx:xx timed out
--alex--
--
| I believe the moment is at hand when, by a paranoiac and active |
| advance of the mind, it will be possible (simultaneously with |
| automatism and other passive states) to systematize confusion |
| and thus to help to discredit completely the world of reality. |
prev parent reply other threads:[~2013-03-27 18:58 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 20:52 iwlwifi unable to reconnect after suspend since v3.9-rc1 Alex Romosan
2013-03-27 13:14 ` Johannes Berg
2013-03-27 17:35 ` Alex Romosan
2013-03-27 17:41 ` Johannes Berg
2013-03-27 18:02 ` Alex Romosan
2013-03-27 19:02 ` Johannes Berg
2013-03-27 19:08 ` Alex Romosan
2013-03-27 19:11 ` Johannes Berg
2013-03-27 19:14 ` Johannes Berg
2013-03-27 19:33 ` Alex Romosan
2013-03-27 19:44 ` Johannes Berg
2013-03-27 20:03 ` Alex Romosan
2013-03-27 20:13 ` Johannes Berg
2013-03-27 20:29 ` Alex Romosan
2013-03-27 17:42 ` Johannes Berg
2013-03-27 17:48 ` Alex Romosan
2013-03-27 17:54 ` Johannes Berg
2013-03-27 18:58 ` Alex Romosan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878v58oejx.fsf@sycorax.lbl.gov \
--to=romosan@sycorax.lbl.gov \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.