From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?utf-8?Q?Bj=C3=B8rn_Mork?= Subject: Re: kernel problems with smart on LSI-92xx Date: Mon, 29 Nov 2010 08:09:14 +0100 Message-ID: <878w0cmwrp.fsf@nemi.mork.no> References: <4CD9A09D.7000508@ngs.ru> <87y690hs3r.fsf@nemi.mork.no> <4CEFD55D.8060200@ngs.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from canardo.mork.no ([148.122.252.1]:44058 "EHLO canardo.mork.no" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753341Ab0K2HWu convert rfc822-to-8bit (ORCPT ); Mon, 29 Nov 2010 02:22:50 -0500 In-Reply-To: <4CEFD55D.8060200@ngs.ru> (Artem Bokhan's message of "Fri, 26 Nov 2010 21:42:21 +0600") Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Artem Bokhan Cc: linux-ide@vger.kernel.org Artem Bokhan writes: > It appears that passing self-test command to SATA disk does not wor= k > too. Although nobody reports any error, self-test actually just does > not start. > > smartctl -d megaraid,10 -t long /dev/sg0 > > smartctl 5.40 2010-10-16 r3189 [x86_64-unknown-linux-gnu] (local buil= d) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforg= e.net > > /dev/sg0 [megaraid_disk_10] [SAT]: Device open changed type from 'meg= araid' to 'sat' > =3D=3D=3D START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION =3D=3D=3D > Sending command: "Execute SMART Extended self-test routine immediatel= y > in off-line mode". > Drive command "Execute SMART Extended self-test routine immediately i= n > off-line mode" successful. > Testing has begun. > Please wait 255 minutes for test to complete. > Test will complete after Sat Nov 27 01:54:44 2010 > > Use smartctl -X to abort test. I'm not sure I understand you correctly. The above output looks normal. You mean that "smartctl -l selftest" doesn't show any test in progress or finished?=20 Bj=C3=B8rn