From: Peter Korsgaard <jacmet@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] Add sysstat tools
Date: Tue, 20 Oct 2009 23:11:53 +0200 [thread overview]
Message-ID: <878wf5src6.fsf@macbook.be.48ers.dk> (raw)
In-Reply-To: <1255892589.19306.107.camel@coalu.atr> (Lionel Landwerlin's message of "Sun\, 18 Oct 2009 21\:03\:09 +0200")
>>>>> "Lionel" == Lionel Landwerlin <lionel.landwerlin@openwide.fr> writes:
Lionel> Hi Bernhard,
Lionel> Thanks a lot for reviewing my patch. I made some correction following
Lionel> your review :
Lionel> * The description has been completed (from the sysstat website).
Lionel> * I rebased my patch on the last git revision and the
Lionel> install-strip rule doesn't seem required anymore, so I removed
Lionel> the patch.
Lionel> * Removed dependency on uclibc.
Lionel> * Filled INSTALL_DOC according to BR2_HAVE_DOCUMENTATION.
Lionel> * And last, INSTALL_ISAG is set to 'n' to avoid the isag script
Lionel> installation which is a postprocessing script depending on
Lionel> tcl/tk.
Thanks, committed. There were still a few minor issues, but I've fixed
those myself.
Lionel> Maybe later I will add the rules for host installation, but it doesn't
Lionel> look like a high priority to me.
Lionel> Here is a new patch :
Lionel> [PATCH] Add sysstat tools
Lionel> Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Lionel> ---
Lionel> package/Config.in | 3 ++-
Lionel> package/sysstat/Config.in | 40 ++++++++++++++++++++++++++++++++++++++++
Lionel> package/sysstat/sysstat.mk | 26 ++++++++++++++++++++++++++
Lionel> 3 files changed, 68 insertions(+), 1 deletions(-)
Lionel> create mode 100644 package/sysstat/Config.in
Lionel> create mode 100644 package/sysstat/sysstat.mk
Lionel> diff --git a/package/Config.in b/package/Config.in
Lionel> index ff7fc3d..aa02d2b 100644
Lionel> --- a/package/Config.in
Lionel> +++ b/package/Config.in
Lionel> @@ -270,7 +270,8 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
Lionel> source "package/sfdisk/Config.in"
Lionel> endif
Lionel> source "package/smartmontools/Config.in"
Lionel> -if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
Lionel> +source "package/sysstat/Config.in"
Lionel> +if BR2_PACKAGE_BUSYBOX_HIDE_OTHERS
Don't change SHOW_OTHERS to HIDE_OTHERS.
Lionel> +
Lionel> + http://pagesperso-orange.fr/sebastien.godard/
Lionel> + ftp://ibiblio.org/pub/Linux/system/status/
One URL should be enough.
Lionel> +SYSSTAT_SOURCE = sysstat-$(SYSSTAT_VERSION).tar.bz2
Lionel> +SYSSTAT_SITE = http://pagesperso-orange.fr/sebastien.godard/
Lionel> +SYSSTAT_AUTORECONF = NO
Lionel> +SYSSTAT_LIBTOOL_PATCH = NO
Lionel> +SYSSTAT_INSTALL_STAGING = YES
sysstat is a collection of programs, not a library - So there afaik
isn't any reason to install into staging.
Lionel> +SYSSTAT_INSTALL_TARGET = YES
Lionel> +
Lionel> +# Should be --disable-man-group, it might be a little mistake in the
Lionel> +# configure.in script.
Lionel> +SYSSTAT_CONF_OPT = --enable-man-group
Lionel> +ifneq ($(BR2_HAVE_DOCUMENTATION),y)
Lionel> +SYSSTAT_CONF_OPT += --disable-documentation
Lionel> +endif
Lionel> +
Lionel> +# The isag tool is a post processing script that depends on tcl/tk
Lionel> +# among other things. So we don't install it.
Lionel> +SYSSTAT_INSTALL_TARGET_OPT = DESTDIR=$(TARGET_DIR) INSTALL_ISAG=n
You are forgetting to add a make target (E.G. install), so nothing will
get installed.
--
Bye, Peter Korsgaard
prev parent reply other threads:[~2009-10-20 21:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-09 13:48 [Buildroot] [PATCH] Add sysstat tools Lionel Landwerlin
2009-10-09 19:55 ` Lionel Landwerlin
2009-10-18 14:05 ` Lionel Landwerlin
2009-10-18 15:47 ` Bernhard Reutner-Fischer
2009-10-18 19:03 ` Lionel Landwerlin
2009-10-20 21:11 ` Peter Korsgaard [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878wf5src6.fsf@macbook.be.48ers.dk \
--to=jacmet@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.