All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Plail <linux-kernel@gitteundmarkus.de>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH] SG_IO readcd and various bugs
Date: Fri, 30 May 2003 15:47:55 +0200	[thread overview]
Message-ID: <878ysopmus.fsf@gitteundmarkus.de> (raw)
In-Reply-To: <20030530130230.GD813@suse.de> (Jens Axboe's message of "Fri, 30 May 2003 15:02:30 +0200")

Hi there!

The patch makes readcd work just fine here :-) Many thanks!

Now if only writing would also work...

regards
Markus

[15:44:31]-[Fri May 30]-[~]
[plail@plailis_lfs]dvdrecord dev=/dev/hdb speed=4 -v -dummy /video-2/trailer_final_1000_dl.mov 
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone 
Limited  features: speed 
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
devname: '/dev/hdb'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.7'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'TEAC    '
Identifikation : 'DV-W50E         '
Revision       : '1.30'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD-RW sequential overwrite
Profile: DVD-RW sequential overwrite (current)
Profile: DVD-RW restricted overwrite (current)
Profile: DVD-R sequential recording (current)
Profile: DVD-ROM 
Profile: CD-RW 
Profile: CD-R 
Profile: CD-ROM 
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW driver (mmc_dvd).
Driver flags   : DVD MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data    97 MB        
Total size:       97 MB = 49843 sectors
Current Secsize: 2048
Total power on  hours: 110055
WARNING: Phys disk size 49843 differs from rzone size 2298496! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 246450
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 2248653
Starting to write CD/DVD at speed 2 in dummy TAO mode for single session.
Last chance to quit, starting dummy write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Starting new track at sector: 0
Track 01:    1 of   97 MB written (fifo  85%) [buf  67%]  11.5x.cdrecord-ProDVD: Success. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 03 07 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70
Sense Key: 0x0 No Additional Sense, Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.005s timeout 100s

write track data: error after 1587200 bytes
cdrecord-ProDVD: A write error occured.
cdrecord-ProDVD: Please properly read the error message above.
Writing  time:    5.198s
Average write speed  14.3x.
Fixating...
Fixating time:    0.464s
cdrecord-ProDVD: fifo had 89 puts and 26 gets.
cdrecord-ProDVD: fifo was 0 times empty and 2 times full, min fill was 82%.
You have new mail in /var/mail/plail
[15:45:08]-[Fri May 30]-[~]
[plail@plailis_lfs]


  reply	other threads:[~2003-05-30 13:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-05-30 13:02 [PATCH] SG_IO readcd and various bugs Jens Axboe
2003-05-30 13:47 ` Markus Plail [this message]
2003-05-30 13:52   ` Markus Plail
2003-05-30 14:58     ` Jens Axboe
2003-05-30 16:57       ` Markus Plail
2003-06-01  7:50         ` uaca
2003-06-01  9:18           ` Markus Plail
2003-06-01 10:19             ` uaca
  -- strict thread matches above, loose matches on Subject: below --
2003-05-31  8:23 Douglas Gilbert
2003-05-31 10:57 ` Jens Axboe
2003-06-01  7:39   ` Douglas Gilbert
2003-06-02  7:27     ` Jens Axboe
2003-06-03  5:23       ` Douglas Gilbert
2003-06-03  5:39         ` Nick Piggin
2003-06-03  8:29         ` Jens Axboe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=878ysopmus.fsf@gitteundmarkus.de \
    --to=linux-kernel@gitteundmarkus.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.