All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Subject: Re: [PATCH v2 8/9] drm/i915: Cleanup fbdev fb setup
Date: Fri, 10 May 2024 14:32:45 +0300	[thread overview]
Message-ID: <87a5kxj40y.fsf@intel.com> (raw)
In-Reply-To: <20240510102257.25096-1-ville.syrjala@linux.intel.com>

On Fri, 10 May 2024, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> We use a mix of 'intel_fb' vs. 'ifbdev->fb' in the same function.
> Both should be pointing at the same thing. Make things less
> confusing by just getting existing fb from 'ifbdev->fb' at the
> start and then sticking with the local 'fb' (renamed from the
> 'intel_fb') until the very end.
>
> v2: rebase
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_fbdev.c | 38 ++++++++++++----------
>  1 file changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_fbdev.c b/drivers/gpu/drm/i915/display/intel_fbdev.c
> index 4bbbf481bb3a..e898018ab76a 100644
> --- a/drivers/gpu/drm/i915/display/intel_fbdev.c
> +++ b/drivers/gpu/drm/i915/display/intel_fbdev.c
> @@ -175,7 +175,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
>  			  struct drm_fb_helper_surface_size *sizes)
>  {
>  	struct intel_fbdev *ifbdev = to_intel_fbdev(helper);
> -	struct intel_framebuffer *intel_fb = ifbdev->fb;
> +	struct intel_framebuffer *fb = ifbdev->fb;
>  	struct drm_device *dev = helper->dev;
>  	struct drm_i915_private *dev_priv = to_i915(dev);
>  	const struct i915_gtt_view view = {
> @@ -195,29 +195,30 @@ static int intelfb_create(struct drm_fb_helper *helper,
>  	if (ret)
>  		return ret;
>  
> -	if (intel_fb &&
> -	    (sizes->fb_width > intel_fb->base.width ||
> -	     sizes->fb_height > intel_fb->base.height)) {
> +	ifbdev->fb = NULL;
> +
> +	if (fb &&
> +	    (sizes->fb_width > fb->base.width ||
> +	     sizes->fb_height > fb->base.height)) {
>  		drm_dbg_kms(&dev_priv->drm,
>  			    "BIOS fb too small (%dx%d), we require (%dx%d),"
>  			    " releasing it\n",
> -			    intel_fb->base.width, intel_fb->base.height,
> +			    fb->base.width, fb->base.height,
>  			    sizes->fb_width, sizes->fb_height);
> -		drm_framebuffer_put(&intel_fb->base);
> -		intel_fb = ifbdev->fb = NULL;
> +		drm_framebuffer_put(&fb->base);
> +		fb = NULL;
>  	}
> -	if (!intel_fb || drm_WARN_ON(dev, !intel_fb_obj(&intel_fb->base))) {
> +	if (!fb || drm_WARN_ON(dev, !intel_fb_obj(&fb->base))) {
>  		drm_dbg_kms(&dev_priv->drm,
>  			    "no BIOS fb, allocating a new one\n");
> -		intel_fb = intel_fbdev_fb_alloc(helper, sizes);
> -		if (IS_ERR(intel_fb))
> -			return PTR_ERR(intel_fb);
> -		ifbdev->fb = intel_fb;
> +		fb = intel_fbdev_fb_alloc(helper, sizes);
> +		if (IS_ERR(fb))
> +			return PTR_ERR(fb);
>  	} else {
>  		drm_dbg_kms(&dev_priv->drm, "re-using BIOS fb\n");
>  		prealloc = true;
> -		sizes->fb_width = intel_fb->base.width;
> -		sizes->fb_height = intel_fb->base.height;
> +		sizes->fb_width = fb->base.width;
> +		sizes->fb_height = fb->base.height;
>  	}
>  
>  	wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);
> @@ -226,7 +227,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
>  	 * This also validates that any existing fb inherited from the
>  	 * BIOS is suitable for own access.
>  	 */
> -	vma = intel_pin_and_fence_fb_obj(&ifbdev->fb->base, false,
> +	vma = intel_pin_and_fence_fb_obj(&fb->base, false,
>  					 &view, false, &flags);
>  	if (IS_ERR(vma)) {
>  		ret = PTR_ERR(vma);
> @@ -240,11 +241,11 @@ static int intelfb_create(struct drm_fb_helper *helper,
>  		goto out_unpin;
>  	}
>  
> -	ifbdev->helper.fb = &ifbdev->fb->base;
> +	ifbdev->helper.fb = &fb->base;
>  
>  	info->fbops = &intelfb_ops;
>  
> -	obj = intel_fb_obj(&intel_fb->base);
> +	obj = intel_fb_obj(&fb->base);
>  
>  	ret = intel_fbdev_fb_fill_info(dev_priv, info, obj, vma);
>  	if (ret)
> @@ -262,8 +263,9 @@ static int intelfb_create(struct drm_fb_helper *helper,
>  	/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
>  
>  	drm_dbg_kms(&dev_priv->drm, "allocated %dx%d fb: 0x%08x\n",
> -		    ifbdev->fb->base.width, ifbdev->fb->base.height,
> +		    fb->base.width, fb->base.height,
>  		    i915_ggtt_offset(vma));
> +	ifbdev->fb = fb;
>  	ifbdev->vma = vma;
>  	ifbdev->vma_flags = flags;

-- 
Jani Nikula, Intel

  reply	other threads:[~2024-05-10 11:32 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-06 12:57 [PATCH 0/9] drm/i915: Plane fb refactoring Ville Syrjala
2024-05-06 12:57 ` [PATCH 1/9] drm/i915: Split gen2 vs. gen3 .max_stride() Ville Syrjala
2024-05-06 13:57   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 2/9] drm/i915: Clean up skl+ plane stride limits Ville Syrjala
2024-05-06 14:03   ` Jani Nikula
2024-05-06 16:38     ` Ville Syrjälä
2024-05-07  9:02       ` Jani Nikula
2024-05-06 12:57 ` [PATCH 3/9] drm/i915: Drop 'uses_fence' parameter from intel_pin_fb_obj_dpt() Ville Syrjala
2024-05-06 14:04   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 4/9] drm/i915: Extract intel_plane_needs_physical() Ville Syrjala
2024-05-06 14:05   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 5/9] drm/i915: Polish types in fb calculations Ville Syrjala
2024-05-06 14:07   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 6/9] drm/i915: Constify 'fb' in during pinning Ville Syrjala
2024-05-06 14:11   ` Jani Nikula
2024-05-06 12:57 ` [PATCH 7/9] drm/i915: Change intel_fbdev_fb_alloc() reuturn type Ville Syrjala
2024-05-06 14:16   ` Jani Nikula
2024-05-06 16:51     ` Ville Syrjälä
2024-05-06 18:19       ` Ville Syrjälä
2024-05-10 10:22   ` [PATCH v2 7/9] drm/i915: Change intel_fbdev_fb_alloc() return type Ville Syrjala
2024-05-10 11:30     ` Jani Nikula
2024-05-06 12:57 ` [PATCH 8/9] drm/i915: Cleanup fbdev fb setup Ville Syrjala
2024-05-10 10:22   ` [PATCH v2 " Ville Syrjala
2024-05-10 11:32     ` Jani Nikula [this message]
2024-05-06 12:57 ` [PATCH 9/9] drm/i915: Rename the fb pinning functions to indicate the address space Ville Syrjala
2024-05-10 11:35   ` Jani Nikula
2024-05-06 13:02 ` ✓ CI.Patch_applied: success for drm/i915: Plane fb refactoring Patchwork
2024-05-06 13:03 ` ✓ CI.checkpatch: " Patchwork
2024-05-06 13:03 ` ✓ CI.KUnit: " Patchwork
2024-05-06 13:15 ` ✓ CI.Build: " Patchwork
2024-05-06 13:18 ` ✓ CI.Hooks: " Patchwork
2024-05-06 13:19 ` ✗ CI.checksparse: warning " Patchwork
2024-05-06 13:34 ` ✗ Fi.CI.SPARSE: " Patchwork
2024-05-06 13:42 ` ✓ Fi.CI.BAT: success " Patchwork
2024-05-06 13:53 ` ✓ CI.BAT: " Patchwork
2024-05-06 15:07 ` ✓ CI.FULL: " Patchwork
2024-05-06 18:13 ` ✗ Fi.CI.IGT: failure " Patchwork
2024-05-10 10:52 ` ✓ CI.Patch_applied: success for drm/i915: Plane fb refactoring (rev3) Patchwork
2024-05-10 10:53 ` ✓ CI.checkpatch: " Patchwork
2024-05-10 10:55 ` ✓ CI.KUnit: " Patchwork
2024-05-10 11:07 ` ✓ CI.Build: " Patchwork
2024-05-10 11:10 ` ✓ CI.Hooks: " Patchwork
2024-05-10 11:11 ` ✗ CI.checksparse: warning " Patchwork
2024-05-10 11:43 ` ✗ CI.BAT: failure " Patchwork
2024-05-10 12:37 ` ✓ Fi.CI.BAT: success " Patchwork
2024-05-10 13:54 ` ✓ CI.FULL: " Patchwork
2024-05-10 16:55 ` [PATCH 0/9] drm/i915: Plane fb refactoring Ville Syrjälä
2024-05-11 19:00   ` Lucas De Marchi
2024-05-11  4:12 ` ✗ Fi.CI.IGT: failure for drm/i915: Plane fb refactoring (rev3) Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87a5kxj40y.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=intel-xe@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.