From: Felipe Balbi <felipe.balbi@linux.intel.com>
To: alex zheng <tc0721@gmail.com>,
linux-usb@vger.kernel.org,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: Re: BUG report: usb: dwc3: Link TRB triggered an intterupt without IOC being setted
Date: Mon, 23 Sep 2019 08:36:41 +0300 [thread overview]
Message-ID: <87a7avh8uu.fsf@gmail.com> (raw)
In-Reply-To: <CADGPSwj3aTJjjHvPSZVgxNRGikznL5i=-8Q2hOUb1LoLbWcRDA@mail.gmail.com>
Hi,
(it helps when you Cc correct maintainers ;-)
alex zheng <tc0721@gmail.com> writes:
> Hi all,
>
> I am a user of dwc3 USB host controller, I found there are some
> confused behavior of trb event on this controller.
> When I run a raw USB data transfer(run bulk in&out transfer with
> libusb) and iperf3(over rndis) at the same time,
> there are some strange interrupts occurs and make the driver report
> error(ERROR DMA transfer).
> And:
So dwc3 is workingo n host mode. Which platform is this?
> 1. this problem only hapened in USB SS mode
> 2. this problem seems not hapen when I run same test case with other
> xhci controller(such as asmedia/intel pcie xhci controller) on PC.
> 3. the kernel version is 4.9.130
Have you tried a more recent kernel? 4.9 is really ancient. Please try
v5.3.
> I think this may be a hw bug of DWC3 USB controller, could anyone
> please give me some help to debug this problem？
>
> The detail log see as below:
> [ 131.074102] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto: xHCI
> handle event, 8000
> 27630 [ 131.074109] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> process trans event : ep_index = 11, event_dma = 1eb13e90
> 27631 [ 131.074117] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> inc_deq, start trb dma = 1eb13e90, dequeue_p = e482ce90, trb_free num
> = 1871, ring type = 2
> 27632 [ 131.074123] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> inc_deq 111, start trb dma = 1eb13ea0, dequeue_p = e482cea0, trb_free
> num = 1872, ring type = 2
> 27633 [ 131.074130] c0 3 (ksoftirqd/0) xhci-hcd xh[ 133.057617] c0 3
> (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto: ERROR Transfer event TRB DMA
> ptr not part of current TD ep_index 16 comp_code 1
> 27634 [ 133.059312] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> Looking for event-dma 000000001eb0fff0 trb-start 000000001eb10000
> trb-end 000000001eb10000 seg-start 000000001eb10000 seg-end
> 000000001eb10ff0
> 27635 [ 133.066215] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> ERROR Transfer event TRB DMA ptr not part of current TD ep_index 16
> comp_code 1
> 27636 [ 133.067908] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> Looking for event-dma 000000001eb10000 trb-start 000000001eb10230
> trb-end 000000001eb10230 seg-start 000000001eb10000 seg-end
> 000000001eb10ff0
> 27637 [ 133.070572] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> ERROR Transfer event TRB DMA ptr not part of current TD ep_index 16
> comp_code 1
> 27638 [ 133.072260] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> Looking for event-dma 000000001eb10010 trb-start 000000001eb10230
> trb-end 000000001eb10230 seg-start 000000001eb10000 seg-end
> 000000001eb10ff0
> 27639 [ 133.075052] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> ERROR Transfer event TRB DMA ptr not part of current TD ep_index 16
> comp_code 1
> 27640 [ 133.076739] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> Looking for event-dma 000000001eb10020 trb-start 000000001eb10230
> trb-end 000000001eb10230 seg-start 000000001eb10000 seg-end
> 000000001eb10ff0
> 27641 [ 133.079472] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> ERROR Transfer event TRB DMA ptr not part of current TD ep_index 16
> comp_code 1
> 27642 [ 133.081159] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> Looking for event-dma 000000001eb10030 trb-start 000000001eb10230
> trb-end 000000001eb10230 seg-start 000000001eb10000 seg-end
> 000000001eb10ff0
> 27643 [ 133.083896] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> ERROR Transfer event TRB DMA ptr not part of current TD ep_index 16
> comp_code 1
> 27644 [ 133.085584] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> Looking for event-dma 000000001eb10040 trb-start 000000001eb10230
> trb-end 000000001eb10230 seg-start 000000001eb10000 seg-end
> 000000001eb10ff0
> 27645 [ 133.088328] c0 3 (ksoftirqd/0) xhci-hcd xhci-hcd.0.auto:
> ERROR Transfer event TRB DMA ptr not part of current TD ep_index 16
> comp_code 1
>
> 1. According these logs above the link trb whose address is 0x1eb0fff0
> occurs a transfer event, but this DMA address is not in the trb ring,
> then the driver report an error(and followed a few error logs witch
> invalid DMA address).
> 2. I dump the data of the address(0x1eb0fff0) and find the IOC bit is
> not set, see as below:
> # dump_reg.sh 0x1eb0fff0 4
> 0x1eb0fff0:0x1EB10000 0x00000000 0x00000000 0x00001800
--
balbi
next prev parent reply other threads:[~2019-09-23 5:36 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-22 8:34 BUG report: usb: dwc3: Link TRB triggered an intterupt without IOC being setted alex zheng
2019-09-23 5:36 ` Felipe Balbi [this message]
2019-09-23 7:08 ` alex zheng
2019-09-23 10:15 ` Mathias Nyman
[not found] ` <CADGPSwi87a5+3mCGAgptHgpBsQk9STQrEKs-kC6Nw55nPdRtOw@mail.gmail.com>
2019-09-25 14:48 ` Mathias Nyman
2019-09-25 16:22 ` David Laight
2019-09-26 5:45 ` Felipe Balbi
2019-09-26 8:21 ` Mathias Nyman
2019-09-26 10:38 ` alex zheng
[not found] ` <CADGPSwhCPvdu=KmQP6RHMJnh292UO0uBAt+KyJqqOWY5DWDc3w@mail.gmail.com>
2019-10-23 9:52 ` alex zheng
2019-10-23 10:01 ` Felipe Balbi
2019-10-25 8:44 ` alex zheng
2019-09-23 10:45 ` Felipe Balbi
2019-09-24 14:19 ` alex zheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a7avh8uu.fsf@gmail.com \
--to=felipe.balbi@linux.intel.com \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@linux.intel.com \
--cc=tc0721@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.