All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mika Kuoppala <mika.kuoppala@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/4] drm/i915: Synchronize irq before parking each engine
Date: Tue, 24 Oct 2017 12:19:15 +0300	[thread overview]
Message-ID: <87a80ghpik.fsf@gaia.fi.intel.com> (raw)
In-Reply-To: <150883593125.7879.14598527500639426348@mail.alporthouse.com>

Chris Wilson <chris@chris-wilson.co.uk> writes:

> Quoting Chris Wilson (2017-10-23 22:32:35)
>> When we park the engine (upon idling), we kill the irq tasklet. However,
>> to be sure that it is not restarted by a final interrupt after doing so,
>> flush the interrupt handler before parking. As we only park the engines
>> when we believe the system is idle, there should not be any spurious
>> interrupts later to distrub us; so flushing the final in-flight
>> interrupt should be sufficient.
>> 
>> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
>> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
>> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
>> Cc: Imre Deak <imre.deak@intel.com>
>> ---
>>  drivers/gpu/drm/i915/i915_gem.c | 6 ++++++
>>  1 file changed, 6 insertions(+)
>> 
>> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
>> index bb0e85043e01..b547a6327d34 100644
>> --- a/drivers/gpu/drm/i915/i915_gem.c
>> +++ b/drivers/gpu/drm/i915/i915_gem.c
>> @@ -3327,6 +3327,12 @@ i915_gem_idle_work_handler(struct work_struct *work)
>>         if (new_requests_since_last_retire(dev_priv))
>>                 goto out_unlock;
>>  
>> +       /*
>> +        * Be paranoid and flush a concurrent interrupt to make sure
>> +        * we don't reactivate any irq tasklets after parking.
>
> * FIXME: Note that even though we have waited for execlists to be idle,
> * there may still be an in-flight interrupt even though the CSB
> * is now empty. synchronize_irq() makes sure that the residual
> * interrupt is completed before we continue, but it doesn't prevent
> * the HW from raising that residual interrupt later. To complete
> * the shield we should coordinate disabling the CS irq with
> * flushing the residual interrupt.

Apparently tasklet_kill is 'broken' in a sence that
yeah new schedule reanimates the dead one. This
seems weird guarantee for an api of such name and
someone has even tried to fix it:

https://patchwork.kernel.org/patch/9298717/

I am pondering that can we combine the tasklet_disable
into the mix. We would just defer the tasklet until
we are ready and willing to process again?

-Mika

>
>> +        */
>> +       synchronize_irq(dev_priv->drm.irq);
>> +
>>         /*
>>          * We are committed now to parking the engines, make sure there
>>          * will be no more interrupts arriving later.
>> -- 
>> 2.15.0.rc1
>> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2017-10-24  9:19 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-23 21:32 [PATCH 1/4] drm/i915: Bump wait-times for the final CS interrupt before parking Chris Wilson
2017-10-23 21:32 ` [PATCH 2/4] drm/i915: Synchronize irq before parking each engine Chris Wilson
2017-10-24  8:01   ` Chris Wilson
2017-10-24  9:05   ` Chris Wilson
2017-10-24  9:19     ` Mika Kuoppala [this message]
2017-10-24  9:32       ` Chris Wilson
2017-10-24 14:26     ` Mika Kuoppala
2017-10-23 21:32 ` [PATCH 3/4] drm/i915: Filter out spurious execlists context-switch interrupts Chris Wilson
2017-10-24 14:40   ` Mika Kuoppala
2017-10-23 21:32 ` [PATCH 4/4] warn Chris Wilson
2017-10-24 14:46   ` Mika Kuoppala
2017-10-24 15:01     ` Chris Wilson
2017-10-23 22:04 ` ✓ Fi.CI.BAT: success for series starting with [1/4] drm/i915: Bump wait-times for the final CS interrupt before parking Patchwork
2017-10-23 23:15 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87a80ghpik.fsf@gaia.fi.intel.com \
    --to=mika.kuoppala@linux.intel.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.