From: Jani Nikula <jani.nikula@linux.intel.com>
To: Shashank Sharma <shashank.sharma@intel.com>,
intel-gfx@lists.freedesktop.org, ville.syrjala@linux.intel.com,
sonika.jindal@intel.com, gary.c.wang@intel.com,
shobhit.kumar@intel.com, daniel.vetter@intel.com
Subject: Re: [PATCH v2] drm/i915: Restrict usage of live status check
Date: Fri, 11 Mar 2016 10:48:43 +0200 [thread overview]
Message-ID: <87a8m5pfh0.fsf@intel.com> (raw)
In-Reply-To: <1457615810-25212-1-git-send-email-shashank.sharma@intel.com>
On Thu, 10 Mar 2016, Shashank Sharma <shashank.sharma@intel.com> wrote:
> This patch does the following:
> - Restricts usage of live status check for HDMI detection.
> While testing certain (monitor + cable) combinations with
> various intel platforms, it seems that live status register
> doesn't work reliably on some older devices. So limit the
> live_status check for HDMI detection, only for platforms
> from gen7 onwards.
> - Cleans up the retry logic.
> There is an extra 'if (try)' check, which can be avoided by
> changing the logic slightly, keeping the delay as same(80ms)
The commit message needs a reference to the commit that broke things.
BR,
Jani.
>
> V2: Ville: Skipped live_status check for IVB
>
> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
> ---
> drivers/gpu/drm/i915/intel_hdmi.c | 24 ++++++++++++++++--------
> 1 file changed, 16 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
> index e2dab48..b1e67de 100644
> --- a/drivers/gpu/drm/i915/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/intel_hdmi.c
> @@ -1397,24 +1397,32 @@ intel_hdmi_detect(struct drm_connector *connector, bool force)
> enum drm_connector_status status;
> struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
> struct drm_i915_private *dev_priv = to_i915(connector->dev);
> - bool live_status = false;
> - unsigned int try;
> + struct drm_device *dev = dev_priv->dev;
> + bool live_status = true;
> + unsigned int try = 9;
>
> DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
> connector->base.id, connector->name);
>
> intel_display_power_get(dev_priv, POWER_DOMAIN_GMBUS);
>
> - for (try = 0; !live_status && try < 9; try++) {
> - if (try)
> - msleep(10);
> + /*
> + * When tested with specific set of monitors + cables,
> + * live status behavior is not very consistent for older
> + * platforms. So add live status check from VLV
> + * onwards.
> + */
> + if (INTEL_INFO(dev)->gen >= 7 && !IS_IVYBRIDGE(dev)) {
> +retry_ls:
> live_status = intel_digital_port_connected(dev_priv,
> hdmi_to_dig_port(intel_hdmi));
> + if (!live_status && --try) {
> + msleep(10);
> + goto retry_ls;
> + }
> + DRM_DEBUG_KMS("Live status %s!\n", live_status ? "up" : "down");
> }
>
> - if (!live_status)
> - DRM_DEBUG_KMS("Live status not up!");
> -
> intel_hdmi_unset_edid(connector);
>
> if (intel_hdmi_set_edid(connector, live_status)) {
--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-03-11 8:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-10 13:16 [PATCH v2] drm/i915: Restrict usage of live status check Shashank Sharma
2016-03-10 15:36 ` ✗ Fi.CI.BAT: failure for drm/i915: Restrict usage of live status check (rev2) Patchwork
2016-03-11 8:48 ` Jani Nikula [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-03-17 9:25 [PATCH] drm/i915: Restrict usage of live status check Jani Nikula
2016-04-20 12:12 ` [PATCH v2] " Shashank Sharma
2016-04-20 14:48 ` Ville Syrjälä
2016-04-21 3:55 ` Sharma, Shashank
2016-04-21 4:45 ` Sharma, Shashank
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87a8m5pfh0.fsf@intel.com \
--to=jani.nikula@linux.intel.com \
--cc=daniel.vetter@intel.com \
--cc=gary.c.wang@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=shashank.sharma@intel.com \
--cc=shobhit.kumar@intel.com \
--cc=sonika.jindal@intel.com \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.