From: "Markus Klotzbücher" <mk@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] u-boot dos not autostart commands
Date: Sun, 18 May 2008 13:06:15 +0200 [thread overview]
Message-ID: <87abindg7s.fsf@denx.de> (raw)
In-Reply-To: <200805171408.06423.a.babich@rez.ru> (Alexei Babich's message of "Sat\, 17 May 2008 14\:08\:06 +0600")
Alexei Babich <a.babich@rez.ru> writes:
> I have PXA270 board with embedded by vendor bootleader - "U-Boot 1.3.0".
> I define that environment:
> ---
> $ printenv
> baudrate=115200
> bootdelay=3
> bootargs=video=pxafb:mode:800x480-16,active,pixclock:37000,left:100,right:1,hsynclen:10,upper:20,lower:1,vsynclen:10,outputen:1,pixclockpol:0 root=/dev/sda1 rootdelay=20 console=ttyS0,115200
> bootcmd=cp.b 01e00000 a1000000 13216e
What are you trying to do here?
...
> But after power on, I cannot see countdown & run bootcmd.
> If I 'run bootcmd' by hand - that works OK. But not automatically after power on.
> Can anybody tell me, how I can solve this ?
It seems that support for bootdelay (CONFIG_BOOTDELAY) is not enabled in
your vendors version of U-Boot. So to get this feature you will have to
compile a new U-Boot.
Best regards
Markus Klotzbuecher
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de
next prev parent reply other threads:[~2008-05-18 11:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-17 8:08 [U-Boot-Users] u-boot dos not autostart commands Alexei Babich
2008-05-18 11:06 ` Markus Klotzbücher [this message]
2008-05-18 11:17 ` Alexei Babich
2008-05-18 12:21 ` Markus Klotzbücher
2008-05-19 2:24 ` Alexei Babich
2008-05-18 20:41 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87abindg7s.fsf@denx.de \
--to=mk@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.