From mboxrd@z Thu Jan 1 00:00:00 1970 From: jacmet@sunsite.dk (Peter Korsgaard) Date: Tue, 22 Nov 2005 21:54:37 +0000 Subject: [lm-sensors] [PATCH] Support for Barco LTP->DVI parport I2C Message-Id: <87acfw5rpc.fsf@48ers.dk> List-Id: References: <87oe4d4uit.fsf@48ers.dk> In-Reply-To: <87oe4d4uit.fsf@48ers.dk> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org >>>>> "Jean" = Jean Delvare writes: Jean> Hi Peter, >> The following patch adds support for the Barco LTP->DVI I2C adapter to >> the i2c-parport driver. Jean> Looks good except for the extra blank line. Good. Jean> Can you please tell more about that device? I googled for K5800236 but Jean> no match. I also don't understand how a LTP->DVI converter is possible Jean> at all. Please enlighten us. Certainly. It's a parport I2C adapter with a DVI connector on it which we use for writing the DDC eeproms during production of our Barco displays. The reason for the DVI connector is just for easy wiring as you can then use a standard DVI cable for it. The K58000236 number is the internal Barco order number for the adapter. I can provide you the schematics if you are interested, but it's basically just a 74128 line buffer and a few diodes and resistors. -- Bye, Peter Korsgaard