From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (IDENT:qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.9.3/8.9.3) with SMTP id IAA14825 for ; Wed, 18 Oct 2000 08:41:39 -0600 Received: from ottawa.linuxcare.com (HELO tarwebok) (216.208.98.2) by mailserv2.iuinc.com with SMTP; 18 Oct 2000 14:41:28 -0000 To: Helge Deller Cc: James Waterhouse , "parisc-linux@thepuffingroup.com" Subject: Re: [parisc-linux] booting on 712/60 References: <39ED4B3B.85348ED2@videotron.ca> <00101809303400.18775@P100> From: David Huggins-Daines Date: 18 Oct 2000 10:41:42 -0400 In-Reply-To: Helge Deller's message of "Wed, 18 Oct 2000 09:30:34 +0200" Message-ID: <87aec22oux.fsf@linuxcare.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii List-ID: Helge Deller writes: > I'm seeing the same here. The kernel switches independend of your > kernel-settings (STI-Console - no STI-Console) to serial-console and just > puts some of it's error-messages to the STI-console. > If you don't have a nullmodem cable, you could try to ping/telnet your > parisc, to see if it's still alive. > I currently don't know which change in CVS disallowed us to use just > STI-Console, but will try to figure out later today. Very strange, because it worked for me. But perhaps I had a magical combination of .config settings that eludes others. Of course sticon and the keyboard driver are so broken that I have a hard time imagining that anyone is actually using them for serious work, so I don't feel a great urgency here. I will look into it now if it's not already fixed. -- dhd@linuxcare.com, http://www.linuxcare.com/ Linuxcare. Support for the revolution.