* [RESEND PATCH v5 0/4] VFIO-based PCI device assignment
@ 2012-09-26 3:38 ` Alex Williamson
0 siblings, 0 replies; 18+ messages in thread
From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw)
To: aliguori; +Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik,
alex.williamson
Only change is adding Michael's ack. Thanks,
Alex
---
Alex Williamson (4):
vfio: Enable vfio-pci and mark supported
vfio: vfio-pci device assignment driver
Update Linux kernel headers
Update kernel header script to include vfio
MAINTAINERS | 5
configure | 6
hw/Makefile.objs | 3
hw/vfio_pci.c | 1864 +++++++++++++++++++++++++++++++++++++++
hw/vfio_pci_int.h | 114 ++
linux-headers/linux/vfio.h | 368 ++++++++
scripts/update-linux-headers.sh | 2
7 files changed, 2360 insertions(+), 2 deletions(-)
create mode 100644 hw/vfio_pci.c
create mode 100644 hw/vfio_pci_int.h
create mode 100644 linux-headers/linux/vfio.h
^ permalink raw reply [flat|nested] 18+ messages in thread* [Qemu-devel] [RESEND PATCH v5 0/4] VFIO-based PCI device assignment @ 2012-09-26 3:38 ` Alex Williamson 0 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, alex.williamson, avi Only change is adding Michael's ack. Thanks, Alex --- Alex Williamson (4): vfio: Enable vfio-pci and mark supported vfio: vfio-pci device assignment driver Update Linux kernel headers Update kernel header script to include vfio MAINTAINERS | 5 configure | 6 hw/Makefile.objs | 3 hw/vfio_pci.c | 1864 +++++++++++++++++++++++++++++++++++++++ hw/vfio_pci_int.h | 114 ++ linux-headers/linux/vfio.h | 368 ++++++++ scripts/update-linux-headers.sh | 2 7 files changed, 2360 insertions(+), 2 deletions(-) create mode 100644 hw/vfio_pci.c create mode 100644 hw/vfio_pci_int.h create mode 100644 linux-headers/linux/vfio.h ^ permalink raw reply [flat|nested] 18+ messages in thread
* [RESEND PATCH v5 1/4] Update kernel header script to include vfio 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson @ 2012-09-26 3:38 ` Alex Williamson -1 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik, alex.williamson Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> --- scripts/update-linux-headers.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh index 53a6f87..67be2ef 100755 --- a/scripts/update-linux-headers.sh +++ b/scripts/update-linux-headers.sh @@ -57,7 +57,7 @@ done rm -rf "$output/linux-headers/linux" mkdir -p "$output/linux-headers/linux" -for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do +for header in kvm.h kvm_para.h vfio.h vhost.h virtio_config.h virtio_ring.h; do cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux" done rm -rf "$output/linux-headers/asm-generic" ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [Qemu-devel] [RESEND PATCH v5 1/4] Update kernel header script to include vfio @ 2012-09-26 3:38 ` Alex Williamson 0 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, alex.williamson, avi Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> --- scripts/update-linux-headers.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh index 53a6f87..67be2ef 100755 --- a/scripts/update-linux-headers.sh +++ b/scripts/update-linux-headers.sh @@ -57,7 +57,7 @@ done rm -rf "$output/linux-headers/linux" mkdir -p "$output/linux-headers/linux" -for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do +for header in kvm.h kvm_para.h vfio.h vhost.h virtio_config.h virtio_ring.h; do cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux" done rm -rf "$output/linux-headers/asm-generic" ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [RESEND PATCH v5 2/4] Update Linux kernel headers 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson @ 2012-09-26 3:38 ` Alex Williamson -1 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik, alex.williamson Based on Linux as of 1a95620. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> --- linux-headers/linux/vfio.h | 368 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 368 insertions(+) create mode 100644 linux-headers/linux/vfio.h diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h new file mode 100644 index 0000000..f787b72 --- /dev/null +++ b/linux-headers/linux/vfio.h @@ -0,0 +1,368 @@ +/* + * VFIO API definition + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson <alex.williamson@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef VFIO_H +#define VFIO_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define VFIO_API_VERSION 0 + + +/* Kernel & User level defines for VFIO IOCTLs. */ + +/* Extensions */ + +#define VFIO_TYPE1_IOMMU 1 + +/* + * The IOCTL interface is designed for extensibility by embedding the + * structure length (argsz) and flags into structures passed between + * kernel and userspace. We therefore use the _IO() macro for these + * defines to avoid implicitly embedding a size into the ioctl request. + * As structure fields are added, argsz will increase to match and flag + * bits will be defined to indicate additional fields with valid data. + * It's *always* the caller's responsibility to indicate the size of + * the structure passed by setting argsz appropriately. + */ + +#define VFIO_TYPE (';') +#define VFIO_BASE 100 + +/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ + +/** + * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) + * + * Report the version of the VFIO API. This allows us to bump the entire + * API version should we later need to add or change features in incompatible + * ways. + * Return: VFIO_API_VERSION + * Availability: Always + */ +#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) + +/** + * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) + * + * Check whether an extension is supported. + * Return: 0 if not supported, 1 (or some other positive integer) if supported. + * Availability: Always + */ +#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) + +/** + * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) + * + * Set the iommu to the given type. The type must be supported by an + * iommu driver as verified by calling CHECK_EXTENSION using the same + * type. A group must be set to this file descriptor before this + * ioctl is available. The IOMMU interfaces enabled by this call are + * specific to the value set. + * Return: 0 on success, -errno on failure + * Availability: When VFIO group attached + */ +#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) + +/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ + +/** + * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, + * struct vfio_group_status) + * + * Retrieve information about the group. Fills in provided + * struct vfio_group_info. Caller sets argsz. + * Return: 0 on succes, -errno on failure. + * Availability: Always + */ +struct vfio_group_status { + __u32 argsz; + __u32 flags; +#define VFIO_GROUP_FLAGS_VIABLE (1 << 0) +#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) +}; +#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) + +/** + * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) + * + * Set the container for the VFIO group to the open VFIO file + * descriptor provided. Groups may only belong to a single + * container. Containers may, at their discretion, support multiple + * groups. Only when a container is set are all of the interfaces + * of the VFIO file descriptor and the VFIO group file descriptor + * available to the user. + * Return: 0 on success, -errno on failure. + * Availability: Always + */ +#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) + +/** + * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) + * + * Remove the group from the attached container. This is the + * opposite of the SET_CONTAINER call and returns the group to + * an initial state. All device file descriptors must be released + * prior to calling this interface. When removing the last group + * from a container, the IOMMU will be disabled and all state lost, + * effectively also returning the VFIO file descriptor to an initial + * state. + * Return: 0 on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) + +/** + * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) + * + * Return a new file descriptor for the device object described by + * the provided string. The string should match a device listed in + * the devices subdirectory of the IOMMU group sysfs entry. The + * group containing the device must already be added to this context. + * Return: new file descriptor on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) + +/* --------------- IOCTLs for DEVICE file descriptors --------------- */ + +/** + * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, + * struct vfio_device_info) + * + * Retrieve information about the device. Fills in provided + * struct vfio_device_info. Caller sets argsz. + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_info { + __u32 argsz; + __u32 flags; +#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ +#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ + __u32 num_regions; /* Max region index + 1 */ + __u32 num_irqs; /* Max IRQ index + 1 */ +}; +#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) + +/** + * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, + * struct vfio_region_info) + * + * Retrieve information about a device region. Caller provides + * struct vfio_region_info with index value set. Caller sets argsz. + * Implementation of region mapping is bus driver specific. This is + * intended to describe MMIO, I/O port, as well as bus specific + * regions (ex. PCI config space). Zero sized regions may be used + * to describe unimplemented regions (ex. unimplemented PCI BARs). + * Return: 0 on success, -errno on failure. + */ +struct vfio_region_info { + __u32 argsz; + __u32 flags; +#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ +#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ +#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ + __u32 index; /* Region index */ + __u32 resv; /* Reserved for alignment */ + __u64 size; /* Region size (bytes) */ + __u64 offset; /* Region offset from start of device fd */ +}; +#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) + +/** + * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, + * struct vfio_irq_info) + * + * Retrieve information about a device IRQ. Caller provides + * struct vfio_irq_info with index value set. Caller sets argsz. + * Implementation of IRQ mapping is bus driver specific. Indexes + * using multiple IRQs are primarily intended to support MSI-like + * interrupt blocks. Zero count irq blocks may be used to describe + * unimplemented interrupt types. + * + * The EVENTFD flag indicates the interrupt index supports eventfd based + * signaling. + * + * The MASKABLE flags indicates the index supports MASK and UNMASK + * actions described below. + * + * AUTOMASKED indicates that after signaling, the interrupt line is + * automatically masked by VFIO and the user needs to unmask the line + * to receive new interrupts. This is primarily intended to distinguish + * level triggered interrupts. + * + * The NORESIZE flag indicates that the interrupt lines within the index + * are setup as a set and new subindexes cannot be enabled without first + * disabling the entire index. This is used for interrupts like PCI MSI + * and MSI-X where the driver may only use a subset of the available + * indexes, but VFIO needs to enable a specific number of vectors + * upfront. In the case of MSI-X, where the user can enable MSI-X and + * then add and unmask vectors, it's up to userspace to make the decision + * whether to allocate the maximum supported number of vectors or tear + * down setup and incrementally increase the vectors as each is enabled. + */ +struct vfio_irq_info { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_INFO_EVENTFD (1 << 0) +#define VFIO_IRQ_INFO_MASKABLE (1 << 1) +#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) +#define VFIO_IRQ_INFO_NORESIZE (1 << 3) + __u32 index; /* IRQ index */ + __u32 count; /* Number of IRQs within this index */ +}; +#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) + +/** + * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) + * + * Set signaling, masking, and unmasking of interrupts. Caller provides + * struct vfio_irq_set with all fields set. 'start' and 'count' indicate + * the range of subindexes being specified. + * + * The DATA flags specify the type of data provided. If DATA_NONE, the + * operation performs the specified action immediately on the specified + * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: + * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. + * + * DATA_BOOL allows sparse support for the same on arrays of interrupts. + * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): + * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, + * data = {1,0,1} + * + * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. + * A value of -1 can be used to either de-assign interrupts if already + * assigned or skip un-assigned interrupts. For example, to set an eventfd + * to be trigger for interrupts [0,0] and [0,2]: + * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, + * data = {fd1, -1, fd2} + * If index [0,1] is previously set, two count = 1 ioctls calls would be + * required to set [0,0] and [0,2] without changing [0,1]. + * + * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used + * with ACTION_TRIGGER to perform kernel level interrupt loopback testing + * from userspace (ie. simulate hardware triggering). + * + * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER + * enables the interrupt index for the device. Individual subindex interrupts + * can be disabled using the -1 value for DATA_EVENTFD or the index can be + * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. + * + * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while + * ACTION_TRIGGER specifies kernel->user signaling. + */ +struct vfio_irq_set { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ +#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ +#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ +#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ +#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ +#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ + __u32 index; + __u32 start; + __u32 count; + __u8 data[]; +}; +#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) + +#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ + VFIO_IRQ_SET_DATA_BOOL | \ + VFIO_IRQ_SET_DATA_EVENTFD) +#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ + VFIO_IRQ_SET_ACTION_UNMASK | \ + VFIO_IRQ_SET_ACTION_TRIGGER) +/** + * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) + * + * Reset a device. + */ +#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) + +/* + * The VFIO-PCI bus driver makes use of the following fixed region and + * IRQ index mapping. Unimplemented regions return a size of zero. + * Unimplemented IRQ types return a count of zero. + */ + +enum { + VFIO_PCI_BAR0_REGION_INDEX, + VFIO_PCI_BAR1_REGION_INDEX, + VFIO_PCI_BAR2_REGION_INDEX, + VFIO_PCI_BAR3_REGION_INDEX, + VFIO_PCI_BAR4_REGION_INDEX, + VFIO_PCI_BAR5_REGION_INDEX, + VFIO_PCI_ROM_REGION_INDEX, + VFIO_PCI_CONFIG_REGION_INDEX, + VFIO_PCI_NUM_REGIONS +}; + +enum { + VFIO_PCI_INTX_IRQ_INDEX, + VFIO_PCI_MSI_IRQ_INDEX, + VFIO_PCI_MSIX_IRQ_INDEX, + VFIO_PCI_NUM_IRQS +}; + +/* -------- API for Type1 VFIO IOMMU -------- */ + +/** + * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) + * + * Retrieve information about the IOMMU object. Fills in provided + * struct vfio_iommu_info. Caller sets argsz. + * + * XXX Should we do these by CHECK_EXTENSION too? + */ +struct vfio_iommu_type1_info { + __u32 argsz; + __u32 flags; +#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ + __u64 iova_pgsizes; /* Bitmap of supported page sizes */ +}; + +#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/** + * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) + * + * Map process virtual addresses to IO virtual addresses using the + * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. + */ +struct vfio_iommu_type1_dma_map { + __u32 argsz; + __u32 flags; +#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ +#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ + __u64 vaddr; /* Process virtual address */ + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) + +/** + * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) + * + * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. + * Caller sets argsz. + */ +struct vfio_iommu_type1_dma_unmap { + __u32 argsz; + __u32 flags; + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) + +#endif /* VFIO_H */ ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [Qemu-devel] [RESEND PATCH v5 2/4] Update Linux kernel headers @ 2012-09-26 3:38 ` Alex Williamson 0 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, alex.williamson, avi Based on Linux as of 1a95620. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> --- linux-headers/linux/vfio.h | 368 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 368 insertions(+) create mode 100644 linux-headers/linux/vfio.h diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h new file mode 100644 index 0000000..f787b72 --- /dev/null +++ b/linux-headers/linux/vfio.h @@ -0,0 +1,368 @@ +/* + * VFIO API definition + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson <alex.williamson@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef VFIO_H +#define VFIO_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define VFIO_API_VERSION 0 + + +/* Kernel & User level defines for VFIO IOCTLs. */ + +/* Extensions */ + +#define VFIO_TYPE1_IOMMU 1 + +/* + * The IOCTL interface is designed for extensibility by embedding the + * structure length (argsz) and flags into structures passed between + * kernel and userspace. We therefore use the _IO() macro for these + * defines to avoid implicitly embedding a size into the ioctl request. + * As structure fields are added, argsz will increase to match and flag + * bits will be defined to indicate additional fields with valid data. + * It's *always* the caller's responsibility to indicate the size of + * the structure passed by setting argsz appropriately. + */ + +#define VFIO_TYPE (';') +#define VFIO_BASE 100 + +/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ + +/** + * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) + * + * Report the version of the VFIO API. This allows us to bump the entire + * API version should we later need to add or change features in incompatible + * ways. + * Return: VFIO_API_VERSION + * Availability: Always + */ +#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) + +/** + * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) + * + * Check whether an extension is supported. + * Return: 0 if not supported, 1 (or some other positive integer) if supported. + * Availability: Always + */ +#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) + +/** + * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) + * + * Set the iommu to the given type. The type must be supported by an + * iommu driver as verified by calling CHECK_EXTENSION using the same + * type. A group must be set to this file descriptor before this + * ioctl is available. The IOMMU interfaces enabled by this call are + * specific to the value set. + * Return: 0 on success, -errno on failure + * Availability: When VFIO group attached + */ +#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) + +/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ + +/** + * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, + * struct vfio_group_status) + * + * Retrieve information about the group. Fills in provided + * struct vfio_group_info. Caller sets argsz. + * Return: 0 on succes, -errno on failure. + * Availability: Always + */ +struct vfio_group_status { + __u32 argsz; + __u32 flags; +#define VFIO_GROUP_FLAGS_VIABLE (1 << 0) +#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) +}; +#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) + +/** + * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) + * + * Set the container for the VFIO group to the open VFIO file + * descriptor provided. Groups may only belong to a single + * container. Containers may, at their discretion, support multiple + * groups. Only when a container is set are all of the interfaces + * of the VFIO file descriptor and the VFIO group file descriptor + * available to the user. + * Return: 0 on success, -errno on failure. + * Availability: Always + */ +#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) + +/** + * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) + * + * Remove the group from the attached container. This is the + * opposite of the SET_CONTAINER call and returns the group to + * an initial state. All device file descriptors must be released + * prior to calling this interface. When removing the last group + * from a container, the IOMMU will be disabled and all state lost, + * effectively also returning the VFIO file descriptor to an initial + * state. + * Return: 0 on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) + +/** + * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) + * + * Return a new file descriptor for the device object described by + * the provided string. The string should match a device listed in + * the devices subdirectory of the IOMMU group sysfs entry. The + * group containing the device must already be added to this context. + * Return: new file descriptor on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) + +/* --------------- IOCTLs for DEVICE file descriptors --------------- */ + +/** + * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, + * struct vfio_device_info) + * + * Retrieve information about the device. Fills in provided + * struct vfio_device_info. Caller sets argsz. + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_info { + __u32 argsz; + __u32 flags; +#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ +#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ + __u32 num_regions; /* Max region index + 1 */ + __u32 num_irqs; /* Max IRQ index + 1 */ +}; +#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) + +/** + * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, + * struct vfio_region_info) + * + * Retrieve information about a device region. Caller provides + * struct vfio_region_info with index value set. Caller sets argsz. + * Implementation of region mapping is bus driver specific. This is + * intended to describe MMIO, I/O port, as well as bus specific + * regions (ex. PCI config space). Zero sized regions may be used + * to describe unimplemented regions (ex. unimplemented PCI BARs). + * Return: 0 on success, -errno on failure. + */ +struct vfio_region_info { + __u32 argsz; + __u32 flags; +#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ +#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ +#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ + __u32 index; /* Region index */ + __u32 resv; /* Reserved for alignment */ + __u64 size; /* Region size (bytes) */ + __u64 offset; /* Region offset from start of device fd */ +}; +#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) + +/** + * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, + * struct vfio_irq_info) + * + * Retrieve information about a device IRQ. Caller provides + * struct vfio_irq_info with index value set. Caller sets argsz. + * Implementation of IRQ mapping is bus driver specific. Indexes + * using multiple IRQs are primarily intended to support MSI-like + * interrupt blocks. Zero count irq blocks may be used to describe + * unimplemented interrupt types. + * + * The EVENTFD flag indicates the interrupt index supports eventfd based + * signaling. + * + * The MASKABLE flags indicates the index supports MASK and UNMASK + * actions described below. + * + * AUTOMASKED indicates that after signaling, the interrupt line is + * automatically masked by VFIO and the user needs to unmask the line + * to receive new interrupts. This is primarily intended to distinguish + * level triggered interrupts. + * + * The NORESIZE flag indicates that the interrupt lines within the index + * are setup as a set and new subindexes cannot be enabled without first + * disabling the entire index. This is used for interrupts like PCI MSI + * and MSI-X where the driver may only use a subset of the available + * indexes, but VFIO needs to enable a specific number of vectors + * upfront. In the case of MSI-X, where the user can enable MSI-X and + * then add and unmask vectors, it's up to userspace to make the decision + * whether to allocate the maximum supported number of vectors or tear + * down setup and incrementally increase the vectors as each is enabled. + */ +struct vfio_irq_info { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_INFO_EVENTFD (1 << 0) +#define VFIO_IRQ_INFO_MASKABLE (1 << 1) +#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) +#define VFIO_IRQ_INFO_NORESIZE (1 << 3) + __u32 index; /* IRQ index */ + __u32 count; /* Number of IRQs within this index */ +}; +#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) + +/** + * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) + * + * Set signaling, masking, and unmasking of interrupts. Caller provides + * struct vfio_irq_set with all fields set. 'start' and 'count' indicate + * the range of subindexes being specified. + * + * The DATA flags specify the type of data provided. If DATA_NONE, the + * operation performs the specified action immediately on the specified + * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: + * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. + * + * DATA_BOOL allows sparse support for the same on arrays of interrupts. + * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): + * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, + * data = {1,0,1} + * + * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. + * A value of -1 can be used to either de-assign interrupts if already + * assigned or skip un-assigned interrupts. For example, to set an eventfd + * to be trigger for interrupts [0,0] and [0,2]: + * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, + * data = {fd1, -1, fd2} + * If index [0,1] is previously set, two count = 1 ioctls calls would be + * required to set [0,0] and [0,2] without changing [0,1]. + * + * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used + * with ACTION_TRIGGER to perform kernel level interrupt loopback testing + * from userspace (ie. simulate hardware triggering). + * + * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER + * enables the interrupt index for the device. Individual subindex interrupts + * can be disabled using the -1 value for DATA_EVENTFD or the index can be + * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. + * + * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while + * ACTION_TRIGGER specifies kernel->user signaling. + */ +struct vfio_irq_set { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ +#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ +#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ +#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ +#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ +#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ + __u32 index; + __u32 start; + __u32 count; + __u8 data[]; +}; +#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) + +#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ + VFIO_IRQ_SET_DATA_BOOL | \ + VFIO_IRQ_SET_DATA_EVENTFD) +#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ + VFIO_IRQ_SET_ACTION_UNMASK | \ + VFIO_IRQ_SET_ACTION_TRIGGER) +/** + * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) + * + * Reset a device. + */ +#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) + +/* + * The VFIO-PCI bus driver makes use of the following fixed region and + * IRQ index mapping. Unimplemented regions return a size of zero. + * Unimplemented IRQ types return a count of zero. + */ + +enum { + VFIO_PCI_BAR0_REGION_INDEX, + VFIO_PCI_BAR1_REGION_INDEX, + VFIO_PCI_BAR2_REGION_INDEX, + VFIO_PCI_BAR3_REGION_INDEX, + VFIO_PCI_BAR4_REGION_INDEX, + VFIO_PCI_BAR5_REGION_INDEX, + VFIO_PCI_ROM_REGION_INDEX, + VFIO_PCI_CONFIG_REGION_INDEX, + VFIO_PCI_NUM_REGIONS +}; + +enum { + VFIO_PCI_INTX_IRQ_INDEX, + VFIO_PCI_MSI_IRQ_INDEX, + VFIO_PCI_MSIX_IRQ_INDEX, + VFIO_PCI_NUM_IRQS +}; + +/* -------- API for Type1 VFIO IOMMU -------- */ + +/** + * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) + * + * Retrieve information about the IOMMU object. Fills in provided + * struct vfio_iommu_info. Caller sets argsz. + * + * XXX Should we do these by CHECK_EXTENSION too? + */ +struct vfio_iommu_type1_info { + __u32 argsz; + __u32 flags; +#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ + __u64 iova_pgsizes; /* Bitmap of supported page sizes */ +}; + +#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/** + * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) + * + * Map process virtual addresses to IO virtual addresses using the + * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. + */ +struct vfio_iommu_type1_dma_map { + __u32 argsz; + __u32 flags; +#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ +#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ + __u64 vaddr; /* Process virtual address */ + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) + +/** + * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) + * + * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. + * Caller sets argsz. + */ +struct vfio_iommu_type1_dma_unmap { + __u32 argsz; + __u32 flags; + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) + +#endif /* VFIO_H */ ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [RESEND PATCH v5 3/4] vfio: vfio-pci device assignment driver 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson @ 2012-09-26 3:38 ` Alex Williamson -1 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik, alex.williamson This adds the core of the QEMU VFIO-based PCI device assignment driver. To make use of this driver, enable CONFIG_VFIO, CONFIG_VFIO_IOMMU_TYPE1, and CONFIG_VFIO_PCI in your host Linux kernel config. Load the vfio-pci module. To assign device 0000:05:00.0 to a guest, do the following: for dev in $(ls /sys/bus/pci/devices/0000:05:00.0/iommu_group/devices); do vendor=$(cat /sys/bus/pci/devices/$dev/vendor) device=$(cat /sys/bus/pci/devices/$dev/device) if [ -e /sys/bus/pci/devices/$dev/driver ]; then echo $dev > /sys/bus/pci/devices/$dev/driver/unbind fi echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id done See Documentation/vfio.txt in the Linux kernel tree for further description of IOMMU groups and VFIO. Then launch qemu including the option: -device vfio-pci,host=0000:05:00.0 Legacy PCI interrupts (INTx) currently makes use of a kludge where we trap BAR accesses and assume the access is in response to an interrupt, therefore de-asserting and unmasking the interrupt. It's not quite as targetted as using the EOI for this, but it's self contained and seems to work across all architectures. The side-effect is a significant performance slow-down for device in INTx mode. Some devices, like graphics cards, don't really use their interrupt, so this can be turned off with the x-intx=off option, which disables INTx alltogether. This should be considered an experimental option until we refine this code. Both MSI and MSI-X are supported and avoid these issues. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> --- hw/vfio_pci.c | 1864 +++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/vfio_pci_int.h | 114 +++ 2 files changed, 1978 insertions(+) create mode 100644 hw/vfio_pci.c create mode 100644 hw/vfio_pci_int.h diff --git a/hw/vfio_pci.c b/hw/vfio_pci.c new file mode 100644 index 0000000..a24558a --- /dev/null +++ b/hw/vfio_pci.c @@ -0,0 +1,1864 @@ +/* + * vfio based device assignment support + * + * Copyright Red Hat, Inc. 2012 + * + * Authors: + * Alex Williamson <alex.williamson@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + * Based on qemu-kvm device-assignment: + * Adapted for KVM by Qumranet. + * Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com) + * Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com) + * Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com) + * Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com) + * Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com) + */ + +#include <dirent.h> +#include <unistd.h> +#include <sys/ioctl.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <linux/vfio.h> + +#include "config.h" +#include "event_notifier.h" +#include "exec-memory.h" +#include "kvm.h" +#include "memory.h" +#include "msi.h" +#include "msix.h" +#include "qemu-error.h" +#include "range.h" +#include "vfio_pci_int.h" + +/* #define DEBUG_VFIO */ +#ifdef DEBUG_VFIO +#define DPRINTF(fmt, ...) \ + do { fprintf(stderr, "vfio: " fmt, ## __VA_ARGS__); } while (0) +#else +#define DPRINTF(fmt, ...) \ + do { } while (0) +#endif + +#define MSIX_CAP_LENGTH 12 + +static QLIST_HEAD(, VFIOContainer) + container_list = QLIST_HEAD_INITIALIZER(container_list); + +static QLIST_HEAD(, VFIOGroup) + group_list = QLIST_HEAD_INITIALIZER(group_list); + +static void vfio_disable_interrupts(VFIODevice *vdev); +static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len); +static void vfio_mmap_set_enabled(VFIODevice *vdev, bool enabled); + +/* + * Common VFIO interrupt disable + */ +static void vfio_disable_irqindex(VFIODevice *vdev, int index) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = index, + .start = 0, + .count = 0, + }; + + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); + + vdev->interrupt = VFIO_INT_NONE; +} + +/* + * INTx + */ +static void vfio_unmask_intx(VFIODevice *vdev) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK, + .index = VFIO_PCI_INTX_IRQ_INDEX, + .start = 0, + .count = 1, + }; + + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); +} + +static void vfio_intx_interrupt(void *opaque) +{ + VFIODevice *vdev = opaque; + + if (!event_notifier_test_and_clear(&vdev->intx.interrupt)) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) Pin %c\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + 'A' + vdev->intx.pin); + + vdev->intx.pending = true; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 1); +} + +static void vfio_eoi(VFIODevice *vdev) +{ + if (!vdev->intx.pending) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) EOI\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + vdev->intx.pending = false; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0); + vfio_unmask_intx(vdev); +} + +typedef struct QEMU_PACKED VFIOIRQSetFD { + struct vfio_irq_set irq_set; + int32_t fd; +} VFIOIRQSetFD; + +static int vfio_enable_intx(VFIODevice *vdev) +{ + VFIOIRQSetFD irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_INTX_IRQ_INDEX, + .start = 0, + .count = 1, + }, + }; + uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1); + int ret; + + if (vdev->intx.disabled || !pin) { + return 0; + } + + vfio_disable_interrupts(vdev); + + vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */ + ret = event_notifier_init(&vdev->intx.interrupt, 0); + if (ret) { + error_report("vfio: Error: event_notifier_init failed\n"); + return ret; + } + + irq_set_fd.fd = event_notifier_get_fd(&vdev->intx.interrupt); + qemu_set_fd_handler(irq_set_fd.fd, vfio_intx_interrupt, NULL, vdev); + + if (ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd)) { + error_report("vfio: Error: Failed to setup INTx fd: %m\n"); + return -errno; + } + + /* + * Disable mmaps so we can trap on BAR accesses. We interpret any + * access as a response to an interrupt and unmask the physical + * device. The device will re-assert if the interrupt is still + * pending. We'll likely retrigger on the host multiple times per + * guest interrupt, but without EOI notification it's better than + * nothing. Acceleration paths through KVM will avoid this. + */ + vfio_mmap_set_enabled(vdev, false); + + vdev->interrupt = VFIO_INT_INTx; + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + return 0; +} + +static void vfio_disable_intx(VFIODevice *vdev) +{ + int fd; + + vfio_disable_irqindex(vdev, VFIO_PCI_INTX_IRQ_INDEX); + vdev->intx.pending = false; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0); + vfio_mmap_set_enabled(vdev, true); + + fd = event_notifier_get_fd(&vdev->intx.interrupt); + qemu_set_fd_handler(fd, NULL, NULL, vdev); + event_notifier_cleanup(&vdev->intx.interrupt); + + vdev->interrupt = VFIO_INT_NONE; + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); +} + +/* + * MSI/X + */ +static void vfio_msi_interrupt(void *opaque) +{ + VFIOMSIVector *vector = opaque; + VFIODevice *vdev = vector->vdev; + int nr = vector - vdev->msi_vectors; + + if (!event_notifier_test_and_clear(&vector->interrupt)) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + if (vdev->interrupt == VFIO_INT_MSIX) { + msix_notify(&vdev->pdev, nr); + } else if (vdev->interrupt == VFIO_INT_MSI) { + msi_notify(&vdev->pdev, nr); + } else { + error_report("vfio: MSI interrupt receieved, but not enabled?\n"); + } +} + +static int vfio_enable_vectors(VFIODevice *vdev, bool msix) +{ + struct vfio_irq_set *irq_set; + int ret = 0, i, argsz; + int32_t *fds; + + argsz = sizeof(*irq_set) + (vdev->nr_vectors * sizeof(*fds)); + + irq_set = g_malloc0(argsz); + irq_set->argsz = argsz; + irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER; + irq_set->index = msix ? VFIO_PCI_MSIX_IRQ_INDEX : VFIO_PCI_MSI_IRQ_INDEX; + irq_set->start = 0; + irq_set->count = vdev->nr_vectors; + fds = (int32_t *)&irq_set->data; + + for (i = 0; i < vdev->nr_vectors; i++) { + if (!vdev->msi_vectors[i].use) { + fds[i] = -1; + continue; + } + + fds[i] = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + } + + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, irq_set); + + g_free(irq_set); + + if (!ret) { + vdev->interrupt = msix ? VFIO_INT_MSIX : VFIO_INT_MSI; + } + + return ret; +} + +static int vfio_msix_vector_use(PCIDevice *pdev, + unsigned int nr, MSIMessage msg) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOMSIVector *vector; + int ret; + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + if (vdev->interrupt != VFIO_INT_MSIX) { + vfio_disable_interrupts(vdev); + } + + if (!vdev->msi_vectors) { + vdev->msi_vectors = g_malloc0(vdev->msix->entries * + sizeof(VFIOMSIVector)); + } + + vector = &vdev->msi_vectors[nr]; + vector->vdev = vdev; + vector->use = true; + + msix_vector_use(pdev, nr); + + if (event_notifier_init(&vector->interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + } + + /* + * Attempt to enable route through KVM irqchip, + * default to userspace handling if unavailable. + */ + vector->virq = kvm_irqchip_add_msi_route(kvm_state, msg); + if (vector->virq < 0 || + kvm_irqchip_add_irqfd_notifier(kvm_state, &vector->interrupt, + vector->virq) < 0) { + if (vector->virq >= 0) { + kvm_irqchip_release_virq(kvm_state, vector->virq); + vector->virq = -1; + } + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + vfio_msi_interrupt, NULL, vector); + } + + /* + * We don't want to have the host allocate all possible MSI vectors + * for a device if they're not in use, so we shutdown and incrementally + * increase them as needed. + */ + if (vdev->nr_vectors < nr + 1) { + int i; + + vfio_disable_irqindex(vdev, VFIO_PCI_MSIX_IRQ_INDEX); + vdev->nr_vectors = nr + 1; + ret = vfio_enable_vectors(vdev, true); + if (ret) { + error_report("vfio: failed to enable vectors, %d\n", ret); + } + + /* We don't know if we've missed interrupts in the interim... */ + for (i = 0; i < vdev->msix->entries; i++) { + if (vdev->msi_vectors[i].use) { + msix_notify(&vdev->pdev, i); + } + } + } else { + VFIOIRQSetFD irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | + VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_MSIX_IRQ_INDEX, + .start = nr, + .count = 1, + }, + .fd = event_notifier_get_fd(&vector->interrupt), + }; + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); + if (ret) { + error_report("vfio: failed to modify vector, %d\n", ret); + } + + /* + * If we were connected to the hardware PBA we could skip this, + * until then, a spurious interrupt is better than starvation. + */ + msix_notify(&vdev->pdev, nr); + } + + return 0; +} + +static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int nr) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOMSIVector *vector = &vdev->msi_vectors[nr]; + VFIOIRQSetFD irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | + VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_MSIX_IRQ_INDEX, + .start = nr, + .count = 1, + }, + .fd = -1, + }; + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d released\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + /* + * XXX What's the right thing to do here? This turns off the interrupt + * completely, but do we really just want to switch the interrupt to + * bouncing through userspace and let msix.c drop it? Not sure. + */ + msix_vector_unuse(pdev, nr); + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); + + if (vector->virq < 0) { + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + NULL, NULL, NULL); + } else { + kvm_irqchip_remove_irqfd_notifier(kvm_state, &vector->interrupt, + vector->virq); + kvm_irqchip_release_virq(kvm_state, vector->virq); + vector->virq = -1; + } + + event_notifier_cleanup(&vector->interrupt); + vector->use = false; +} + +/* TODO This should move to msi.c */ +static MSIMessage msi_get_msg(PCIDevice *pdev, unsigned int vector) +{ + uint16_t flags = pci_get_word(pdev->config + pdev->msi_cap + PCI_MSI_FLAGS); + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT; + MSIMessage msg; + + if (msi64bit) { + msg.address = pci_get_quad(pdev->config + + pdev->msi_cap + PCI_MSI_ADDRESS_LO); + } else { + msg.address = pci_get_long(pdev->config + + pdev->msi_cap + PCI_MSI_ADDRESS_LO); + } + + msg.data = pci_get_word(pdev->config + pdev->msi_cap + + (msi64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)); + msg.data += vector; + + return msg; +} + +/* So should this */ +static void msi_set_qsize(PCIDevice *pdev, uint8_t size) +{ + uint8_t *config = pdev->config + pdev->msi_cap; + uint16_t flags; + + flags = pci_get_word(config + PCI_MSI_FLAGS); + flags = le16_to_cpu(flags); + flags &= ~PCI_MSI_FLAGS_QSIZE; + flags |= (size & 0x7) << 4; + flags = cpu_to_le16(flags); + pci_set_word(config + PCI_MSI_FLAGS, flags); +} + +static void vfio_enable_msi(VFIODevice *vdev) +{ + int ret, i; + + vfio_disable_interrupts(vdev); + + vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev); +retry: + vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(VFIOMSIVector)); + + for (i = 0; i < vdev->nr_vectors; i++) { + MSIMessage msg; + VFIOMSIVector *vector = &vdev->msi_vectors[i]; + + vector->vdev = vdev; + vector->use = true; + + if (event_notifier_init(&vector->interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + } + + msg = msi_get_msg(&vdev->pdev, i); + + /* + * Attempt to enable route through KVM irqchip, + * default to userspace handling if unavailable. + */ + vector->virq = kvm_irqchip_add_msi_route(kvm_state, msg); + if (vector->virq < 0 || + kvm_irqchip_add_irqfd_notifier(kvm_state, &vector->interrupt, + vector->virq) < 0) { + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + vfio_msi_interrupt, NULL, vector); + } + } + + ret = vfio_enable_vectors(vdev, false); + if (ret) { + if (ret < 0) { + error_report("vfio: Error: Failed to setup MSI fds: %m\n"); + } else if (ret != vdev->nr_vectors) { + error_report("vfio: Error: Failed to enable %d " + "MSI vectors, retry with %d\n", vdev->nr_vectors, ret); + } + + for (i = 0; i < vdev->nr_vectors; i++) { + VFIOMSIVector *vector = &vdev->msi_vectors[i]; + if (vector->virq >= 0) { + kvm_irqchip_remove_irqfd_notifier(kvm_state, &vector->interrupt, + vector->virq); + kvm_irqchip_release_virq(kvm_state, vector->virq); + vector->virq = -1; + } else { + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + NULL, NULL, NULL); + } + event_notifier_cleanup(&vector->interrupt); + } + + g_free(vdev->msi_vectors); + + if (ret > 0 && ret != vdev->nr_vectors) { + vdev->nr_vectors = ret; + goto retry; + } + vdev->nr_vectors = 0; + + return; + } + + msi_set_qsize(&vdev->pdev, vdev->nr_vectors); + + DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vdev->nr_vectors); +} + +static void vfio_disable_msi_x(VFIODevice *vdev, bool msix) +{ + int i; + + vfio_disable_irqindex(vdev, msix ? VFIO_PCI_MSIX_IRQ_INDEX : + VFIO_PCI_MSI_IRQ_INDEX); + + for (i = 0; i < vdev->nr_vectors; i++) { + VFIOMSIVector *vector = &vdev->msi_vectors[i]; + + if (!vector->use) { + continue; + } + + if (vector->virq >= 0) { + kvm_irqchip_remove_irqfd_notifier(kvm_state, + &vector->interrupt, vector->virq); + kvm_irqchip_release_virq(kvm_state, vector->virq); + vector->virq = -1; + } else { + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + NULL, NULL, NULL); + } + + if (msix) { + msix_vector_unuse(&vdev->pdev, i); + } + + event_notifier_cleanup(&vector->interrupt); + } + + g_free(vdev->msi_vectors); + vdev->msi_vectors = NULL; + vdev->nr_vectors = 0; + + if (!msix) { + msi_set_qsize(&vdev->pdev, 0); /* Actually still means 1 vector */ + } + + DPRINTF("%s(%04x:%02x:%02x.%x, msi%s)\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, msix ? "x" : ""); + + vfio_enable_intx(vdev); +} + +/* + * IO Port/MMIO - Beware of the endians, VFIO is always little endian + */ +static void vfio_bar_write(void *opaque, target_phys_addr_t addr, + uint64_t data, unsigned size) +{ + VFIOBAR *bar = opaque; + union { + uint8_t byte; + uint16_t word; + uint32_t dword; + uint64_t qword; + } buf; + + switch (size) { + case 1: + buf.byte = data; + break; + case 2: + buf.word = cpu_to_le16(data); + break; + case 4: + buf.dword = cpu_to_le32(data); + break; + default: + hw_error("vfio: unsupported write size, %d bytes\n", size); + break; + } + + if (pwrite(bar->fd, &buf, size, bar->fd_offset + addr) != size) { + error_report("%s(,0x%"TARGET_PRIxPHYS", 0x%"PRIx64", %d) failed: %m\n", + __func__, addr, data, size); + } + + DPRINTF("%s(BAR%d+0x%"TARGET_PRIxPHYS", 0x%"PRIx64", %d)\n", + __func__, bar->nr, addr, data, size); + + /* + * A read or write to a BAR always signals an INTx EOI. This will + * do nothing if not pending (including not in INTx mode). We assume + * that a BAR access is in response to an interrupt and that BAR + * accesses will service the interrupt. Unfortunately, we don't know + * which access will service the interrupt, so we're potentially + * getting quite a few host interrupts per guest interrupt. + */ + vfio_eoi(DO_UPCAST(VFIODevice, bars[bar->nr], bar)); +} + +static uint64_t vfio_bar_read(void *opaque, + target_phys_addr_t addr, unsigned size) +{ + VFIOBAR *bar = opaque; + union { + uint8_t byte; + uint16_t word; + uint32_t dword; + uint64_t qword; + } buf; + uint64_t data = 0; + + if (pread(bar->fd, &buf, size, bar->fd_offset + addr) != size) { + error_report("%s(,0x%"TARGET_PRIxPHYS", %d) failed: %m\n", + __func__, addr, size); + return (uint64_t)-1; + } + + switch (size) { + case 1: + data = buf.byte; + break; + case 2: + data = le16_to_cpu(buf.word); + break; + case 4: + data = le32_to_cpu(buf.dword); + break; + default: + hw_error("vfio: unsupported read size, %d bytes\n", size); + break; + } + + DPRINTF("%s(BAR%d+0x%"TARGET_PRIxPHYS", %d) = 0x%"PRIx64"\n", + __func__, bar->nr, addr, size, data); + + /* Same as write above */ + vfio_eoi(DO_UPCAST(VFIODevice, bars[bar->nr], bar)); + + return data; +} + +static const MemoryRegionOps vfio_bar_ops = { + .read = vfio_bar_read, + .write = vfio_bar_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +/* + * PCI config space + */ +static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + uint32_t val = 0; + + /* + * We only need QEMU PCI config support for the ROM BAR, the MSI and MSIX + * capabilities, and the multifunction bit below. We let VFIO handle + * virtualizing everything else. Performance is not a concern here. + */ + if (ranges_overlap(addr, len, PCI_ROM_ADDRESS, 4) || + (pdev->cap_present & QEMU_PCI_CAP_MSIX && + ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) || + (pdev->cap_present & QEMU_PCI_CAP_MSI && + ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size))) { + + val = pci_default_read_config(pdev, addr, len); + } else { + if (pread(vdev->fd, &val, len, vdev->config_offset + addr) != len) { + error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x) failed: %m\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, addr, len); + return -errno; + } + val = le32_to_cpu(val); + } + + /* Multifunction bit is virualized in QEMU */ + if (unlikely(ranges_overlap(addr, len, PCI_HEADER_TYPE, 1))) { + uint32_t mask = PCI_HEADER_TYPE_MULTI_FUNCTION; + + if (len == 4) { + mask <<= 16; + } + + if (pdev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) { + val |= mask; + } else { + val &= ~mask; + } + } + + DPRINTF("%s(%04x:%02x:%02x.%x, @0x%x, len=0x%x) %x\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, len, val); + + return val; +} + +static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr, + uint32_t val, int len) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + uint32_t val_le = cpu_to_le32(val); + + DPRINTF("%s(%04x:%02x:%02x.%x, @0x%x, 0x%x, len=0x%x)\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, val, len); + + /* Write everything to VFIO, let it filter out what we can't write */ + if (pwrite(vdev->fd, &val_le, len, vdev->config_offset + addr) != len) { + error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x, 0x%x) failed: %m\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, addr, val, len); + } + + /* Write standard header bits to emulation */ + if (addr < PCI_CONFIG_HEADER_SIZE) { + pci_default_write_config(pdev, addr, val, len); + return; + } + + /* MSI/MSI-X Enabling/Disabling */ + if (pdev->cap_present & QEMU_PCI_CAP_MSI && + ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size)) { + int is_enabled, was_enabled = msi_enabled(pdev); + + pci_default_write_config(pdev, addr, val, len); + + is_enabled = msi_enabled(pdev); + + if (!was_enabled && is_enabled) { + vfio_enable_msi(vdev); + } else if (was_enabled && !is_enabled) { + vfio_disable_msi_x(vdev, false); + } + } + + if (pdev->cap_present & QEMU_PCI_CAP_MSIX && + ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) { + int is_enabled, was_enabled = msix_enabled(pdev); + + pci_default_write_config(pdev, addr, val, len); + + is_enabled = msix_enabled(pdev); + + if (!was_enabled && is_enabled) { + /* vfio_msix_vector_use handles this automatically */ + } else if (was_enabled && !is_enabled) { + vfio_disable_msi_x(vdev, true); + } + } +} + +/* + * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86 + */ +static int vfio_dma_map(VFIOContainer *container, target_phys_addr_t iova, + ram_addr_t size, void *vaddr, bool readonly) +{ + struct vfio_iommu_type1_dma_map map = { + .argsz = sizeof(map), + .flags = VFIO_DMA_MAP_FLAG_READ, + .vaddr = (__u64)vaddr, + .iova = iova, + .size = size, + }; + + if (!readonly) { + map.flags |= VFIO_DMA_MAP_FLAG_WRITE; + } + + if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map)) { + DPRINTF("VFIO_MAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static int vfio_dma_unmap(VFIOContainer *container, + target_phys_addr_t iova, ram_addr_t size) +{ + struct vfio_iommu_type1_dma_unmap unmap = { + .argsz = sizeof(unmap), + .flags = 0, + .iova = iova, + .size = size, + }; + + if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) { + DPRINTF("VFIO_UNMAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static void vfio_listener_dummy1(MemoryListener *listener) +{ + /* We don't do batching (begin/commit) or care about logging */ +} + +static void vfio_listener_dummy2(MemoryListener *listener, + MemoryRegionSection *section) +{ + /* We don't do logging or care about nops */ +} + +static void vfio_listener_dummy3(MemoryListener *listener, + MemoryRegionSection *section, + bool match_data, uint64_t data, + EventNotifier *e) +{ + /* We don't care about eventfds */ +} + +static bool vfio_listener_skipped_section(MemoryRegionSection *section) +{ + return !memory_region_is_ram(section->mr); +} + +static void vfio_listener_region_add(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.listener); + target_phys_addr_t iova, end; + void *vaddr; + int ret; + + if (vfio_listener_skipped_section(section)) { + DPRINTF("vfio: SKIPPING region_add %"TARGET_PRIxPHYS" - %"PRIx64"\n", + section->offset_within_address_space, + section->offset_within_address_space + section->size - 1); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region\n", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + section->size) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + vaddr = memory_region_get_ram_ptr(section->mr) + + section->offset_within_region + + (iova - section->offset_within_address_space); + + DPRINTF("vfio: region_add %"TARGET_PRIxPHYS" - %"TARGET_PRIxPHYS" [%p]\n", + iova, end - 1, vaddr); + + ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly); + if (ret) { + error_report("vfio_dma_map(%p, 0x%"TARGET_PRIxPHYS", " + "0x%"TARGET_PRIxPHYS", %p) = %d (%m)\n", + container, iova, end - iova, vaddr, ret); + } +} + +static void vfio_listener_region_del(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.listener); + target_phys_addr_t iova, end; + int ret; + + if (vfio_listener_skipped_section(section)) { + DPRINTF("vfio: SKIPPING region_del %"TARGET_PRIxPHYS" - %"PRIx64"\n", + section->offset_within_address_space, + section->offset_within_address_space + section->size - 1); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region\n", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + section->size) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + DPRINTF("vfio: region_del %"TARGET_PRIxPHYS" - %"TARGET_PRIxPHYS"\n", + iova, end - 1); + + ret = vfio_dma_unmap(container, iova, end - iova); + if (ret) { + error_report("vfio_dma_unmap(%p, 0x%"TARGET_PRIxPHYS", " + "0x%"TARGET_PRIxPHYS") = %d (%m)\n", + container, iova, end - iova, ret); + } +} + +static MemoryListener vfio_memory_listener = { + .begin = vfio_listener_dummy1, + .commit = vfio_listener_dummy1, + .region_add = vfio_listener_region_add, + .region_del = vfio_listener_region_del, + .region_nop = vfio_listener_dummy2, + .log_start = vfio_listener_dummy2, + .log_stop = vfio_listener_dummy2, + .log_sync = vfio_listener_dummy2, + .log_global_start = vfio_listener_dummy1, + .log_global_stop = vfio_listener_dummy1, + .eventfd_add = vfio_listener_dummy3, + .eventfd_del = vfio_listener_dummy3, +}; + +static void vfio_listener_release(VFIOContainer *container) +{ + memory_listener_unregister(&container->iommu_data.listener); +} + +/* + * Interrupt setup + */ +static void vfio_disable_interrupts(VFIODevice *vdev) +{ + switch (vdev->interrupt) { + case VFIO_INT_INTx: + vfio_disable_intx(vdev); + break; + case VFIO_INT_MSI: + vfio_disable_msi_x(vdev, false); + break; + case VFIO_INT_MSIX: + vfio_disable_msi_x(vdev, true); + break; + } +} + +static int vfio_setup_msi(VFIODevice *vdev, int pos) +{ + uint16_t ctrl; + bool msi_64bit, msi_maskbit; + int ret, entries; + + /* + * TODO: don't peek into msi_supported, let msi_init fail and + * check for ENOTSUP + */ + if (!msi_supported) { + return 0; + } + + if (pread(vdev->fd, &ctrl, sizeof(ctrl), + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { + return -errno; + } + ctrl = le16_to_cpu(ctrl); + + msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT); + msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT); + entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1); + + DPRINTF("%04x:%02x:%02x.%x PCI MSI CAP @0x%x\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, pos); + + ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit); + if (ret < 0) { + error_report("vfio: msi_init failed\n"); + return ret; + } + vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0); + + return 0; +} + +/* + * We don't have any control over how pci_add_capability() inserts + * capabilities into the chain. In order to setup MSI-X we need a + * MemoryRegion for the BAR. In order to setup the BAR and not + * attempt to mmap the MSI-X table area, which VFIO won't allow, we + * need to first look for where the MSI-X table lives. So we + * unfortunately split MSI-X setup across two functions. + */ +static int vfio_early_setup_msix(VFIODevice *vdev) +{ + uint8_t pos; + uint16_t ctrl; + uint32_t table, pba; + + pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX); + if (!pos) { + return 0; + } + + if (pread(vdev->fd, &ctrl, sizeof(ctrl), + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { + return -errno; + } + + if (pread(vdev->fd, &table, sizeof(table), + vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) { + return -errno; + } + + if (pread(vdev->fd, &pba, sizeof(pba), + vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) { + return -errno; + } + + ctrl = le16_to_cpu(ctrl); + table = le32_to_cpu(table); + pba = le32_to_cpu(pba); + + vdev->msix = g_malloc0(sizeof(*(vdev->msix))); + vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1; + + DPRINTF("%04x:%02x:%02x.%x " + "PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d\n", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, pos, vdev->msix->table_bar, + vdev->msix->table_offset, vdev->msix->entries); + + return 0; +} + +static int vfio_setup_msix(VFIODevice *vdev, int pos) +{ + int ret; + + /* + * TODO: don't peek into msi_supported, let msix_init fail and + * check for ENOTSUP + */ + if (!msi_supported) { + return 0; + } + + ret = msix_init(&vdev->pdev, vdev->msix->entries, + &vdev->bars[vdev->msix->table_bar].mem, + vdev->msix->table_bar, vdev->msix->table_offset, + &vdev->bars[vdev->msix->pba_bar].mem, + vdev->msix->pba_bar, vdev->msix->pba_offset, pos); + if (ret < 0) { + error_report("vfio: msix_init failed\n"); + return ret; + } + + ret = msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use, + vfio_msix_vector_release); + if (ret) { + error_report("vfio: msix_set_vector_notifiers failed %d\n", ret); + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, + &vdev->bars[vdev->msix->pba_bar].mem); + return ret; + } + + return 0; +} + +static void vfio_teardown_msi(VFIODevice *vdev) +{ + msi_uninit(&vdev->pdev); + + if (vdev->msix) { + /* FIXME: Why can't unset just silently do nothing?? */ + if (vdev->pdev.msix_vector_use_notifier && + vdev->pdev.msix_vector_release_notifier) { + msix_unset_vector_notifiers(&vdev->pdev); + } + + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, + &vdev->bars[vdev->msix->pba_bar].mem); + } +} + +/* + * Resource setup + */ +static void vfio_mmap_set_enabled(VFIODevice *vdev, bool enabled) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + VFIOBAR *bar = &vdev->bars[i]; + + if (!bar->size) { + continue; + } + + memory_region_set_enabled(&bar->mmap_mem, enabled); + if (vdev->msix && vdev->msix->table_bar == i) { + memory_region_set_enabled(&vdev->msix->mmap_mem, enabled); + } + } +} + +static void vfio_unmap_bar(VFIODevice *vdev, int nr) +{ + VFIOBAR *bar = &vdev->bars[nr]; + + if (!bar->size) { + return; + } + + memory_region_del_subregion(&bar->mem, &bar->mmap_mem); + munmap(bar->mmap, memory_region_size(&bar->mmap_mem)); + + if (vdev->msix && vdev->msix->table_bar == nr) { + memory_region_del_subregion(&bar->mem, &vdev->msix->mmap_mem); + munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem)); + } + + memory_region_destroy(&bar->mem); +} + +static int vfio_mmap_bar(VFIOBAR *bar, MemoryRegion *mem, MemoryRegion *submem, + void **map, size_t size, off_t offset, + const char *name) +{ + int ret = 0; + + if (size && bar->flags & VFIO_REGION_INFO_FLAG_MMAP) { + int prot = 0; + + if (bar->flags & VFIO_REGION_INFO_FLAG_READ) { + prot |= PROT_READ; + } + + if (bar->flags & VFIO_REGION_INFO_FLAG_WRITE) { + prot |= PROT_WRITE; + } + + *map = mmap(NULL, size, prot, MAP_SHARED, + bar->fd, bar->fd_offset + offset); + if (*map == MAP_FAILED) { + *map = NULL; + ret = -errno; + goto empty_region; + } + + memory_region_init_ram_ptr(submem, name, size, *map); + } else { +empty_region: + /* Create a zero sized sub-region to make cleanup easy. */ + memory_region_init(submem, name, 0); + } + + memory_region_add_subregion(mem, offset, submem); + + return ret; +} + +static void vfio_map_bar(VFIODevice *vdev, int nr) +{ + VFIOBAR *bar = &vdev->bars[nr]; + unsigned size = bar->size; + char name[64]; + uint32_t pci_bar; + uint8_t type; + int ret; + + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ + if (!size) { + return; + } + + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + /* Determine what type of BAR this is for registration */ + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); + if (ret != sizeof(pci_bar)) { + error_report("vfio: Failed to read BAR %d (%m)\n", nr); + return; + } + + pci_bar = le32_to_cpu(pci_bar); + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); + + /* A "slow" read/write mapping underlies all BARs */ + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); + + /* + * We can't mmap areas overlapping the MSIX vector table, so we + * potentially insert a direct-mapped subregion before and after it. + */ + if (vdev->msix && vdev->msix->table_bar == nr) { + size = vdev->msix->table_offset & TARGET_PAGE_MASK; + } + + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); + if (vfio_mmap_bar(bar, &bar->mem, + &bar->mmap_mem, &bar->mmap, size, 0, name)) { + error_report("%s unsupported. Performance may be slow\n", name); + } + + if (vdev->msix && vdev->msix->table_bar == nr) { + unsigned start; + + start = TARGET_PAGE_ALIGN(vdev->msix->table_offset + + (vdev->msix->entries * PCI_MSIX_ENTRY_SIZE)); + + size = start < bar->size ? bar->size - start : 0; + strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1); + /* VFIOMSIXInfo contains another MemoryRegion for this mapping */ + if (vfio_mmap_bar(bar, &bar->mem, &vdev->msix->mmap_mem, + &vdev->msix->mmap, size, start, name)) { + error_report("%s unsupported. Performance may be slow\n", name); + } + } +} + +static void vfio_map_bars(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + vfio_map_bar(vdev, i); + } +} + +static void vfio_unmap_bars(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + vfio_unmap_bar(vdev, i); + } +} + +/* + * General setup + */ +static uint8_t vfio_std_cap_max_size(PCIDevice *pdev, uint8_t pos) +{ + uint8_t tmp, next = 0xff; + + for (tmp = pdev->config[PCI_CAPABILITY_LIST]; tmp; + tmp = pdev->config[tmp + 1]) { + if (tmp > pos && tmp < next) { + next = tmp; + } + } + + return next - pos; +} + +static int vfio_add_std_cap(VFIODevice *vdev, uint8_t pos) +{ + PCIDevice *pdev = &vdev->pdev; + uint8_t cap_id, next, size; + int ret; + + cap_id = pdev->config[pos]; + next = pdev->config[pos + 1]; + + /* + * If it becomes important to configure capabilities to their actual + * size, use this as the default when it's something we don't recognize. + * Since QEMU doesn't actually handle many of the config accesses, + * exact size doesn't seem worthwhile. + */ + size = vfio_std_cap_max_size(pdev, pos); + + /* + * pci_add_capability always inserts the new capability at the head + * of the chain. Therefore to end up with a chain that matches the + * physical device, we insert from the end by making this recursive. + * This is also why we pre-caclulate size above as cached config space + * will be changed as we unwind the stack. + */ + if (next) { + ret = vfio_add_std_cap(vdev, next); + if (ret) { + return ret; + } + } else { + pdev->config[PCI_CAPABILITY_LIST] = 0; /* Begin the rebuild */ + } + + switch (cap_id) { + case PCI_CAP_ID_MSI: + ret = vfio_setup_msi(vdev, pos); + break; + case PCI_CAP_ID_MSIX: + ret = vfio_setup_msix(vdev, pos); + break; + default: + ret = pci_add_capability(pdev, cap_id, pos, size); + break; + } + + if (ret < 0) { + error_report("vfio: %04x:%02x:%02x.%x Error adding PCI capability " + "0x%x[0x%x]@0x%x: %d\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + cap_id, size, pos, ret); + return ret; + } + + return 0; +} + +static int vfio_add_capabilities(VFIODevice *vdev) +{ + PCIDevice *pdev = &vdev->pdev; + + if (!(pdev->config[PCI_STATUS] & PCI_STATUS_CAP_LIST) || + !pdev->config[PCI_CAPABILITY_LIST]) { + return 0; /* Nothing to add */ + } + + return vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST]); +} + +static int vfio_load_rom(VFIODevice *vdev) +{ + uint64_t size = vdev->rom_size; + char name[32]; + off_t off = 0, voff = vdev->rom_offset; + ssize_t bytes; + void *ptr; + + /* If loading ROM from file, pci handles it */ + if (vdev->pdev.romfile || !vdev->pdev.rom_bar || !size) { + return 0; + } + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + snprintf(name, sizeof(name), "vfio[%04x:%02x:%02x.%x].rom", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + memory_region_init_ram(&vdev->pdev.rom, name, size); + ptr = memory_region_get_ram_ptr(&vdev->pdev.rom); + memset(ptr, 0xff, size); + + while (size) { + bytes = pread(vdev->fd, ptr + off, size, voff + off); + if (bytes == 0) { + break; /* expect that we could get back less than the ROM BAR */ + } else if (bytes > 0) { + off += bytes; + size -= bytes; + } else { + if (errno == EINTR || errno == EAGAIN) { + continue; + } + error_report("vfio: Error reading device ROM: %m\n"); + memory_region_destroy(&vdev->pdev.rom); + return -errno; + } + } + + pci_register_bar(&vdev->pdev, PCI_ROM_SLOT, 0, &vdev->pdev.rom); + vdev->pdev.has_rom = true; + return 0; +} + +static int vfio_connect_container(VFIOGroup *group) +{ + VFIOContainer *container; + int ret, fd; + + if (group->container) { + return 0; + } + + QLIST_FOREACH(container, &container_list, next) { + if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) { + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + return 0; + } + } + + fd = qemu_open("/dev/vfio/vfio", O_RDWR); + if (fd < 0) { + error_report("vfio: failed to open /dev/vfio/vfio: %m\n"); + return -errno; + } + + ret = ioctl(fd, VFIO_GET_API_VERSION); + if (ret != VFIO_API_VERSION) { + error_report("vfio: supported vfio version: %d, " + "reported version: %d\n", VFIO_API_VERSION, ret); + close(fd); + return -EINVAL; + } + + container = g_malloc0(sizeof(*container)); + container->fd = fd; + + if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) { + ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd); + if (ret) { + error_report("vfio: failed to set group container: %m\n"); + g_free(container); + close(fd); + return -errno; + } + + ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU); + if (ret) { + error_report("vfio: failed to set iommu for container: %m\n"); + g_free(container); + close(fd); + return -errno; + } + + container->iommu_data.listener = vfio_memory_listener; + container->iommu_data.release = vfio_listener_release; + + memory_listener_register(&container->iommu_data.listener, + get_system_memory()); + } else { + error_report("vfio: No available IOMMU models\n"); + g_free(container); + close(fd); + return -EINVAL; + } + + QLIST_INIT(&container->group_list); + QLIST_INSERT_HEAD(&container_list, container, next); + + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + + return 0; +} + +static void vfio_disconnect_container(VFIOGroup *group) +{ + VFIOContainer *container = group->container; + + if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) { + error_report("vfio: error disconnecting group %d from container\n", + group->groupid); + } + + QLIST_REMOVE(group, container_next); + group->container = NULL; + + if (QLIST_EMPTY(&container->group_list)) { + if (container->iommu_data.release) { + container->iommu_data.release(container); + } + QLIST_REMOVE(container, next); + DPRINTF("vfio_disconnect_container: close container->fd\n"); + close(container->fd); + g_free(container); + } +} + +static VFIOGroup *vfio_get_group(int groupid) +{ + VFIOGroup *group; + char path[32]; + struct vfio_group_status status = { .argsz = sizeof(status) }; + + QLIST_FOREACH(group, &group_list, next) { + if (group->groupid == groupid) { + return group; + } + } + + group = g_malloc0(sizeof(*group)); + + snprintf(path, sizeof(path), "/dev/vfio/%d", groupid); + group->fd = qemu_open(path, O_RDWR); + if (group->fd < 0) { + error_report("vfio: error opening %s: %m\n", path); + g_free(group); + return NULL; + } + + if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) { + error_report("vfio: error getting group status: %m\n"); + close(group->fd); + g_free(group); + return NULL; + } + + if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) { + error_report("vfio: error, group %d is not viable, please ensure " + "all devices within the iommu_group are bound to their " + "vfio bus driver.\n", groupid); + close(group->fd); + g_free(group); + return NULL; + } + + group->groupid = groupid; + QLIST_INIT(&group->device_list); + + if (vfio_connect_container(group)) { + error_report("vfio: failed to setup container for group %d\n", groupid); + close(group->fd); + g_free(group); + return NULL; + } + + QLIST_INSERT_HEAD(&group_list, group, next); + + return group; +} + +static void vfio_put_group(VFIOGroup *group) +{ + if (!QLIST_EMPTY(&group->device_list)) { + return; + } + + vfio_disconnect_container(group); + QLIST_REMOVE(group, next); + DPRINTF("vfio_put_group: close group->fd\n"); + close(group->fd); + g_free(group); +} + +static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev) +{ + struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) }; + struct vfio_region_info reg_info = { .argsz = sizeof(reg_info) }; + int ret, i; + + ret = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name); + if (ret < 0) { + error_report("vfio: error getting device %s from group %d: %m\n", + name, group->groupid); + error_report("Verify all devices in group %d are bound to vfio-pci " + "or pci-stub and not already in use\n", group->groupid); + return ret; + } + + vdev->fd = ret; + vdev->group = group; + QLIST_INSERT_HEAD(&group->device_list, vdev, next); + + /* Sanity check device */ + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_INFO, &dev_info); + if (ret) { + error_report("vfio: error getting device info: %m\n"); + goto error; + } + + DPRINTF("Device %s flags: %u, regions: %u, irgs: %u\n", name, + dev_info.flags, dev_info.num_regions, dev_info.num_irqs); + + if (!(dev_info.flags & VFIO_DEVICE_FLAGS_PCI)) { + error_report("vfio: Um, this isn't a PCI device\n"); + goto error; + } + + vdev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET); + if (!vdev->reset_works) { + error_report("Warning, device %s does not support reset\n", name); + } + + if (dev_info.num_regions != VFIO_PCI_NUM_REGIONS) { + error_report("vfio: unexpected number of io regions %u\n", + dev_info.num_regions); + goto error; + } + + if (dev_info.num_irqs != VFIO_PCI_NUM_IRQS) { + error_report("vfio: unexpected number of irqs %u\n", dev_info.num_irqs); + goto error; + } + + for (i = VFIO_PCI_BAR0_REGION_INDEX; i < VFIO_PCI_ROM_REGION_INDEX; i++) { + reg_info.index = i; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting region %d info: %m\n", i); + goto error; + } + + DPRINTF("Device %s region %d:\n", name, i); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->bars[i].flags = reg_info.flags; + vdev->bars[i].size = reg_info.size; + vdev->bars[i].fd_offset = reg_info.offset; + vdev->bars[i].fd = vdev->fd; + vdev->bars[i].nr = i; + } + + reg_info.index = VFIO_PCI_ROM_REGION_INDEX; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting ROM info: %m\n"); + goto error; + } + + DPRINTF("Device %s ROM:\n", name); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->rom_size = reg_info.size; + vdev->rom_offset = reg_info.offset; + + reg_info.index = VFIO_PCI_CONFIG_REGION_INDEX; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting config info: %m\n"); + goto error; + } + + DPRINTF("Device %s config:\n", name); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->config_size = reg_info.size; + vdev->config_offset = reg_info.offset; + +error: + if (ret) { + QLIST_REMOVE(vdev, next); + vdev->group = NULL; + close(vdev->fd); + } + return ret; +} + +static void vfio_put_device(VFIODevice *vdev) +{ + QLIST_REMOVE(vdev, next); + vdev->group = NULL; + DPRINTF("vfio_put_device: close vdev->fd\n"); + close(vdev->fd); + if (vdev->msix) { + g_free(vdev->msix); + vdev->msix = NULL; + } +} + +static int vfio_initfn(PCIDevice *pdev) +{ + VFIODevice *pvdev, *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOGroup *group; + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name; + ssize_t len; + struct stat st; + int groupid; + int ret; + + /* Check that the host device exists */ + snprintf(path, sizeof(path), + "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + if (stat(path, &st) < 0) { + error_report("vfio: error: no such host device: %s\n", path); + return -errno; + } + + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1); + + len = readlink(path, iommu_group_path, PATH_MAX); + if (len <= 0) { + error_report("vfio: error no iommu_group for device\n"); + return -errno; + } + + iommu_group_path[len] = 0; + group_name = basename(iommu_group_path); + + if (sscanf(group_name, "%d", &groupid) != 1) { + error_report("vfio: error reading %s: %m\n", path); + return -errno; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) group %d\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, groupid); + + group = vfio_get_group(groupid); + if (!group) { + error_report("vfio: failed to get group %d\n", groupid); + return -ENOENT; + } + + snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + + QLIST_FOREACH(pvdev, &group->device_list, next) { + if (pvdev->host.domain == vdev->host.domain && + pvdev->host.bus == vdev->host.bus && + pvdev->host.slot == vdev->host.slot && + pvdev->host.function == vdev->host.function) { + + error_report("vfio: error: device %s is already attached\n", path); + vfio_put_group(group); + return -EBUSY; + } + } + + ret = vfio_get_device(group, path, vdev); + if (ret) { + error_report("vfio: failed to get device %s\n", path); + vfio_put_group(group); + return ret; + } + + /* Get a copy of config space */ + ret = pread(vdev->fd, vdev->pdev.config, + MIN(pci_config_size(&vdev->pdev), vdev->config_size), + vdev->config_offset); + if (ret < (int)MIN(pci_config_size(&vdev->pdev), vdev->config_size)) { + ret = ret < 0 ? -errno : -EFAULT; + error_report("vfio: Failed to read device config space\n"); + goto out_put; + } + + /* + * Clear host resource mapping info. If we choose not to register a + * BAR, such as might be the case with the option ROM, we can get + * confusing, unwritable, residual addresses from the host here. + */ + memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); + memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); + + vfio_load_rom(vdev); + + ret = vfio_early_setup_msix(vdev); + if (ret) { + goto out_put; + } + + vfio_map_bars(vdev); + + ret = vfio_add_capabilities(vdev); + if (ret) { + goto out_teardown; + } + + if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) { + if (vdev->intx.intx && strcmp(vdev->intx.intx, "off")) { + error_report("vfio: Unknown option x-intx=%s, " + "valid options: \"off\".\n", vdev->intx.intx); + ret = -EINVAL; + goto out_teardown; + } + + if (vdev->intx.intx && !strcmp(vdev->intx.intx, "off")) { + vdev->intx.disabled = true; + } + + ret = vfio_enable_intx(vdev); + if (ret) { + goto out_teardown; + } + } + + return 0; + +out_teardown: + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); + vfio_teardown_msi(vdev); + vfio_unmap_bars(vdev); +out_put: + vfio_put_device(vdev); + vfio_put_group(group); + return ret; +} + +static void vfio_exitfn(PCIDevice *pdev) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOGroup *group = vdev->group; + + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); + vfio_disable_interrupts(vdev); + vfio_teardown_msi(vdev); + vfio_unmap_bars(vdev); + vfio_put_device(vdev); + vfio_put_group(group); +} + +static void vfio_pci_reset(DeviceState *dev) +{ + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + + if (!vdev->reset_works) { + return; + } + + if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { + error_report("vfio: Error unable to reset physical device " + "(%04x:%02x:%02x.%x): %m\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + } +} + +static Property vfio_pci_dev_properties[] = { + DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIODevice, host), + DEFINE_PROP_STRING("x-intx", VFIODevice, intx.intx), + /* + * TODO - support passed fds... is this necessary? + * DEFINE_PROP_STRING("vfiofd", VFIODevice, vfiofd_name), + * DEFINE_PROP_STRING("vfiogroupfd, VFIODevice, vfiogroupfd_name), + */ + DEFINE_PROP_END_OF_LIST(), +}; + + +static void vfio_pci_dev_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pdc = PCI_DEVICE_CLASS(klass); + + dc->reset = vfio_pci_reset; + dc->props = vfio_pci_dev_properties; + pdc->init = vfio_initfn; + pdc->exit = vfio_exitfn; + pdc->config_read = vfio_pci_read_config; + pdc->config_write = vfio_pci_write_config; +} + +static const TypeInfo vfio_pci_dev_info = { + .name = "vfio-pci", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(VFIODevice), + .class_init = vfio_pci_dev_class_init, +}; + +static void register_vfio_pci_dev_type(void) +{ + type_register_static(&vfio_pci_dev_info); +} + +type_init(register_vfio_pci_dev_type) diff --git a/hw/vfio_pci_int.h b/hw/vfio_pci_int.h new file mode 100644 index 0000000..3812d8d --- /dev/null +++ b/hw/vfio_pci_int.h @@ -0,0 +1,114 @@ +/* + * vfio based device assignment support + * + * Copyright Red Hat, Inc. 2012 + * + * Authors: + * Alex Williamson <alex.williamson@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + */ + +#ifndef HW_VFIO_PCI_INT_H +#define HW_VFIO_PCI_INT_H + +#include "qemu-common.h" +#include "qemu-queue.h" +#include "pci.h" +#include "event_notifier.h" + +typedef struct VFIOBAR { + off_t fd_offset; /* offset of BAR within device fd */ + int fd; /* device fd, allows us to pass VFIOBAR as opaque data */ + MemoryRegion mem; /* slow, read/write access */ + MemoryRegion mmap_mem; /* direct mapped access */ + void *mmap; + size_t size; + uint32_t flags; /* VFIO region flags (rd/wr/mmap) */ + uint8_t nr; /* cache the BAR number for debug */ +} VFIOBAR; + +typedef struct VFIOINTx { + bool pending; /* interrupt pending */ + bool kvm_accel; /* set when QEMU bypass through KVM enabled */ + uint8_t pin; /* which pin to pull for qemu_set_irq */ + EventNotifier interrupt; /* eventfd triggered on interrupt */ + EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ + PCIINTxRoute route; /* routing info for QEMU bypass */ + bool disabled; + char *intx; +} VFIOINTx; + +struct VFIODevice; + +typedef struct VFIOMSIVector { + EventNotifier interrupt; /* eventfd triggered on interrupt */ + struct VFIODevice *vdev; /* back pointer to device */ + int virq; /* KVM irqchip route for QEMU bypass */ + bool use; +} VFIOMSIVector; + +enum { + VFIO_INT_NONE = 0, + VFIO_INT_INTx = 1, + VFIO_INT_MSI = 2, + VFIO_INT_MSIX = 3, +}; + +struct VFIOGroup; + +typedef struct VFIOContainer { + int fd; /* /dev/vfio/vfio, empowered by the attached groups */ + struct { + /* enable abstraction to support various iommu backends */ + union { + MemoryListener listener; /* Used by type1 iommu */ + }; + void (*release)(struct VFIOContainer *); + } iommu_data; + QLIST_HEAD(, VFIOGroup) group_list; + QLIST_ENTRY(VFIOContainer) next; +} VFIOContainer; + +/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */ +typedef struct VFIOMSIXInfo { + uint8_t table_bar; + uint8_t pba_bar; + uint16_t entries; + uint32_t table_offset; + uint32_t pba_offset; + MemoryRegion mmap_mem; + void *mmap; +} VFIOMSIXInfo; + +typedef struct VFIODevice { + PCIDevice pdev; + int fd; + VFIOINTx intx; + unsigned int config_size; + off_t config_offset; /* Offset of config space region within device fd */ + unsigned int rom_size; + off_t rom_offset; /* Offset of ROM region within device fd */ + int msi_cap_size; + VFIOMSIVector *msi_vectors; + VFIOMSIXInfo *msix; + int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ + int interrupt; /* Current interrupt type */ + VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ + PCIHostDeviceAddress host; + QLIST_ENTRY(VFIODevice) next; + struct VFIOGroup *group; + bool reset_works; +} VFIODevice; + +typedef struct VFIOGroup { + int fd; + int groupid; + VFIOContainer *container; + QLIST_HEAD(, VFIODevice) device_list; + QLIST_ENTRY(VFIOGroup) next; + QLIST_ENTRY(VFIOGroup) container_next; +} VFIOGroup; + +#endif /* HW_VFIO_PCI_INT_H */ ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [Qemu-devel] [RESEND PATCH v5 3/4] vfio: vfio-pci device assignment driver @ 2012-09-26 3:38 ` Alex Williamson 0 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, alex.williamson, avi This adds the core of the QEMU VFIO-based PCI device assignment driver. To make use of this driver, enable CONFIG_VFIO, CONFIG_VFIO_IOMMU_TYPE1, and CONFIG_VFIO_PCI in your host Linux kernel config. Load the vfio-pci module. To assign device 0000:05:00.0 to a guest, do the following: for dev in $(ls /sys/bus/pci/devices/0000:05:00.0/iommu_group/devices); do vendor=$(cat /sys/bus/pci/devices/$dev/vendor) device=$(cat /sys/bus/pci/devices/$dev/device) if [ -e /sys/bus/pci/devices/$dev/driver ]; then echo $dev > /sys/bus/pci/devices/$dev/driver/unbind fi echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id done See Documentation/vfio.txt in the Linux kernel tree for further description of IOMMU groups and VFIO. Then launch qemu including the option: -device vfio-pci,host=0000:05:00.0 Legacy PCI interrupts (INTx) currently makes use of a kludge where we trap BAR accesses and assume the access is in response to an interrupt, therefore de-asserting and unmasking the interrupt. It's not quite as targetted as using the EOI for this, but it's self contained and seems to work across all architectures. The side-effect is a significant performance slow-down for device in INTx mode. Some devices, like graphics cards, don't really use their interrupt, so this can be turned off with the x-intx=off option, which disables INTx alltogether. This should be considered an experimental option until we refine this code. Both MSI and MSI-X are supported and avoid these issues. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> --- hw/vfio_pci.c | 1864 +++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/vfio_pci_int.h | 114 +++ 2 files changed, 1978 insertions(+) create mode 100644 hw/vfio_pci.c create mode 100644 hw/vfio_pci_int.h diff --git a/hw/vfio_pci.c b/hw/vfio_pci.c new file mode 100644 index 0000000..a24558a --- /dev/null +++ b/hw/vfio_pci.c @@ -0,0 +1,1864 @@ +/* + * vfio based device assignment support + * + * Copyright Red Hat, Inc. 2012 + * + * Authors: + * Alex Williamson <alex.williamson@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + * Based on qemu-kvm device-assignment: + * Adapted for KVM by Qumranet. + * Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com) + * Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com) + * Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com) + * Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com) + * Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com) + */ + +#include <dirent.h> +#include <unistd.h> +#include <sys/ioctl.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <linux/vfio.h> + +#include "config.h" +#include "event_notifier.h" +#include "exec-memory.h" +#include "kvm.h" +#include "memory.h" +#include "msi.h" +#include "msix.h" +#include "qemu-error.h" +#include "range.h" +#include "vfio_pci_int.h" + +/* #define DEBUG_VFIO */ +#ifdef DEBUG_VFIO +#define DPRINTF(fmt, ...) \ + do { fprintf(stderr, "vfio: " fmt, ## __VA_ARGS__); } while (0) +#else +#define DPRINTF(fmt, ...) \ + do { } while (0) +#endif + +#define MSIX_CAP_LENGTH 12 + +static QLIST_HEAD(, VFIOContainer) + container_list = QLIST_HEAD_INITIALIZER(container_list); + +static QLIST_HEAD(, VFIOGroup) + group_list = QLIST_HEAD_INITIALIZER(group_list); + +static void vfio_disable_interrupts(VFIODevice *vdev); +static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len); +static void vfio_mmap_set_enabled(VFIODevice *vdev, bool enabled); + +/* + * Common VFIO interrupt disable + */ +static void vfio_disable_irqindex(VFIODevice *vdev, int index) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = index, + .start = 0, + .count = 0, + }; + + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); + + vdev->interrupt = VFIO_INT_NONE; +} + +/* + * INTx + */ +static void vfio_unmask_intx(VFIODevice *vdev) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK, + .index = VFIO_PCI_INTX_IRQ_INDEX, + .start = 0, + .count = 1, + }; + + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); +} + +static void vfio_intx_interrupt(void *opaque) +{ + VFIODevice *vdev = opaque; + + if (!event_notifier_test_and_clear(&vdev->intx.interrupt)) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) Pin %c\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + 'A' + vdev->intx.pin); + + vdev->intx.pending = true; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 1); +} + +static void vfio_eoi(VFIODevice *vdev) +{ + if (!vdev->intx.pending) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) EOI\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + vdev->intx.pending = false; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0); + vfio_unmask_intx(vdev); +} + +typedef struct QEMU_PACKED VFIOIRQSetFD { + struct vfio_irq_set irq_set; + int32_t fd; +} VFIOIRQSetFD; + +static int vfio_enable_intx(VFIODevice *vdev) +{ + VFIOIRQSetFD irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_INTX_IRQ_INDEX, + .start = 0, + .count = 1, + }, + }; + uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1); + int ret; + + if (vdev->intx.disabled || !pin) { + return 0; + } + + vfio_disable_interrupts(vdev); + + vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */ + ret = event_notifier_init(&vdev->intx.interrupt, 0); + if (ret) { + error_report("vfio: Error: event_notifier_init failed\n"); + return ret; + } + + irq_set_fd.fd = event_notifier_get_fd(&vdev->intx.interrupt); + qemu_set_fd_handler(irq_set_fd.fd, vfio_intx_interrupt, NULL, vdev); + + if (ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd)) { + error_report("vfio: Error: Failed to setup INTx fd: %m\n"); + return -errno; + } + + /* + * Disable mmaps so we can trap on BAR accesses. We interpret any + * access as a response to an interrupt and unmask the physical + * device. The device will re-assert if the interrupt is still + * pending. We'll likely retrigger on the host multiple times per + * guest interrupt, but without EOI notification it's better than + * nothing. Acceleration paths through KVM will avoid this. + */ + vfio_mmap_set_enabled(vdev, false); + + vdev->interrupt = VFIO_INT_INTx; + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + return 0; +} + +static void vfio_disable_intx(VFIODevice *vdev) +{ + int fd; + + vfio_disable_irqindex(vdev, VFIO_PCI_INTX_IRQ_INDEX); + vdev->intx.pending = false; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0); + vfio_mmap_set_enabled(vdev, true); + + fd = event_notifier_get_fd(&vdev->intx.interrupt); + qemu_set_fd_handler(fd, NULL, NULL, vdev); + event_notifier_cleanup(&vdev->intx.interrupt); + + vdev->interrupt = VFIO_INT_NONE; + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); +} + +/* + * MSI/X + */ +static void vfio_msi_interrupt(void *opaque) +{ + VFIOMSIVector *vector = opaque; + VFIODevice *vdev = vector->vdev; + int nr = vector - vdev->msi_vectors; + + if (!event_notifier_test_and_clear(&vector->interrupt)) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + if (vdev->interrupt == VFIO_INT_MSIX) { + msix_notify(&vdev->pdev, nr); + } else if (vdev->interrupt == VFIO_INT_MSI) { + msi_notify(&vdev->pdev, nr); + } else { + error_report("vfio: MSI interrupt receieved, but not enabled?\n"); + } +} + +static int vfio_enable_vectors(VFIODevice *vdev, bool msix) +{ + struct vfio_irq_set *irq_set; + int ret = 0, i, argsz; + int32_t *fds; + + argsz = sizeof(*irq_set) + (vdev->nr_vectors * sizeof(*fds)); + + irq_set = g_malloc0(argsz); + irq_set->argsz = argsz; + irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER; + irq_set->index = msix ? VFIO_PCI_MSIX_IRQ_INDEX : VFIO_PCI_MSI_IRQ_INDEX; + irq_set->start = 0; + irq_set->count = vdev->nr_vectors; + fds = (int32_t *)&irq_set->data; + + for (i = 0; i < vdev->nr_vectors; i++) { + if (!vdev->msi_vectors[i].use) { + fds[i] = -1; + continue; + } + + fds[i] = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + } + + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, irq_set); + + g_free(irq_set); + + if (!ret) { + vdev->interrupt = msix ? VFIO_INT_MSIX : VFIO_INT_MSI; + } + + return ret; +} + +static int vfio_msix_vector_use(PCIDevice *pdev, + unsigned int nr, MSIMessage msg) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOMSIVector *vector; + int ret; + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + if (vdev->interrupt != VFIO_INT_MSIX) { + vfio_disable_interrupts(vdev); + } + + if (!vdev->msi_vectors) { + vdev->msi_vectors = g_malloc0(vdev->msix->entries * + sizeof(VFIOMSIVector)); + } + + vector = &vdev->msi_vectors[nr]; + vector->vdev = vdev; + vector->use = true; + + msix_vector_use(pdev, nr); + + if (event_notifier_init(&vector->interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + } + + /* + * Attempt to enable route through KVM irqchip, + * default to userspace handling if unavailable. + */ + vector->virq = kvm_irqchip_add_msi_route(kvm_state, msg); + if (vector->virq < 0 || + kvm_irqchip_add_irqfd_notifier(kvm_state, &vector->interrupt, + vector->virq) < 0) { + if (vector->virq >= 0) { + kvm_irqchip_release_virq(kvm_state, vector->virq); + vector->virq = -1; + } + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + vfio_msi_interrupt, NULL, vector); + } + + /* + * We don't want to have the host allocate all possible MSI vectors + * for a device if they're not in use, so we shutdown and incrementally + * increase them as needed. + */ + if (vdev->nr_vectors < nr + 1) { + int i; + + vfio_disable_irqindex(vdev, VFIO_PCI_MSIX_IRQ_INDEX); + vdev->nr_vectors = nr + 1; + ret = vfio_enable_vectors(vdev, true); + if (ret) { + error_report("vfio: failed to enable vectors, %d\n", ret); + } + + /* We don't know if we've missed interrupts in the interim... */ + for (i = 0; i < vdev->msix->entries; i++) { + if (vdev->msi_vectors[i].use) { + msix_notify(&vdev->pdev, i); + } + } + } else { + VFIOIRQSetFD irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | + VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_MSIX_IRQ_INDEX, + .start = nr, + .count = 1, + }, + .fd = event_notifier_get_fd(&vector->interrupt), + }; + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); + if (ret) { + error_report("vfio: failed to modify vector, %d\n", ret); + } + + /* + * If we were connected to the hardware PBA we could skip this, + * until then, a spurious interrupt is better than starvation. + */ + msix_notify(&vdev->pdev, nr); + } + + return 0; +} + +static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int nr) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOMSIVector *vector = &vdev->msi_vectors[nr]; + VFIOIRQSetFD irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | + VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_MSIX_IRQ_INDEX, + .start = nr, + .count = 1, + }, + .fd = -1, + }; + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d released\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + /* + * XXX What's the right thing to do here? This turns off the interrupt + * completely, but do we really just want to switch the interrupt to + * bouncing through userspace and let msix.c drop it? Not sure. + */ + msix_vector_unuse(pdev, nr); + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); + + if (vector->virq < 0) { + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + NULL, NULL, NULL); + } else { + kvm_irqchip_remove_irqfd_notifier(kvm_state, &vector->interrupt, + vector->virq); + kvm_irqchip_release_virq(kvm_state, vector->virq); + vector->virq = -1; + } + + event_notifier_cleanup(&vector->interrupt); + vector->use = false; +} + +/* TODO This should move to msi.c */ +static MSIMessage msi_get_msg(PCIDevice *pdev, unsigned int vector) +{ + uint16_t flags = pci_get_word(pdev->config + pdev->msi_cap + PCI_MSI_FLAGS); + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT; + MSIMessage msg; + + if (msi64bit) { + msg.address = pci_get_quad(pdev->config + + pdev->msi_cap + PCI_MSI_ADDRESS_LO); + } else { + msg.address = pci_get_long(pdev->config + + pdev->msi_cap + PCI_MSI_ADDRESS_LO); + } + + msg.data = pci_get_word(pdev->config + pdev->msi_cap + + (msi64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)); + msg.data += vector; + + return msg; +} + +/* So should this */ +static void msi_set_qsize(PCIDevice *pdev, uint8_t size) +{ + uint8_t *config = pdev->config + pdev->msi_cap; + uint16_t flags; + + flags = pci_get_word(config + PCI_MSI_FLAGS); + flags = le16_to_cpu(flags); + flags &= ~PCI_MSI_FLAGS_QSIZE; + flags |= (size & 0x7) << 4; + flags = cpu_to_le16(flags); + pci_set_word(config + PCI_MSI_FLAGS, flags); +} + +static void vfio_enable_msi(VFIODevice *vdev) +{ + int ret, i; + + vfio_disable_interrupts(vdev); + + vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev); +retry: + vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(VFIOMSIVector)); + + for (i = 0; i < vdev->nr_vectors; i++) { + MSIMessage msg; + VFIOMSIVector *vector = &vdev->msi_vectors[i]; + + vector->vdev = vdev; + vector->use = true; + + if (event_notifier_init(&vector->interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + } + + msg = msi_get_msg(&vdev->pdev, i); + + /* + * Attempt to enable route through KVM irqchip, + * default to userspace handling if unavailable. + */ + vector->virq = kvm_irqchip_add_msi_route(kvm_state, msg); + if (vector->virq < 0 || + kvm_irqchip_add_irqfd_notifier(kvm_state, &vector->interrupt, + vector->virq) < 0) { + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + vfio_msi_interrupt, NULL, vector); + } + } + + ret = vfio_enable_vectors(vdev, false); + if (ret) { + if (ret < 0) { + error_report("vfio: Error: Failed to setup MSI fds: %m\n"); + } else if (ret != vdev->nr_vectors) { + error_report("vfio: Error: Failed to enable %d " + "MSI vectors, retry with %d\n", vdev->nr_vectors, ret); + } + + for (i = 0; i < vdev->nr_vectors; i++) { + VFIOMSIVector *vector = &vdev->msi_vectors[i]; + if (vector->virq >= 0) { + kvm_irqchip_remove_irqfd_notifier(kvm_state, &vector->interrupt, + vector->virq); + kvm_irqchip_release_virq(kvm_state, vector->virq); + vector->virq = -1; + } else { + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + NULL, NULL, NULL); + } + event_notifier_cleanup(&vector->interrupt); + } + + g_free(vdev->msi_vectors); + + if (ret > 0 && ret != vdev->nr_vectors) { + vdev->nr_vectors = ret; + goto retry; + } + vdev->nr_vectors = 0; + + return; + } + + msi_set_qsize(&vdev->pdev, vdev->nr_vectors); + + DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vdev->nr_vectors); +} + +static void vfio_disable_msi_x(VFIODevice *vdev, bool msix) +{ + int i; + + vfio_disable_irqindex(vdev, msix ? VFIO_PCI_MSIX_IRQ_INDEX : + VFIO_PCI_MSI_IRQ_INDEX); + + for (i = 0; i < vdev->nr_vectors; i++) { + VFIOMSIVector *vector = &vdev->msi_vectors[i]; + + if (!vector->use) { + continue; + } + + if (vector->virq >= 0) { + kvm_irqchip_remove_irqfd_notifier(kvm_state, + &vector->interrupt, vector->virq); + kvm_irqchip_release_virq(kvm_state, vector->virq); + vector->virq = -1; + } else { + qemu_set_fd_handler(event_notifier_get_fd(&vector->interrupt), + NULL, NULL, NULL); + } + + if (msix) { + msix_vector_unuse(&vdev->pdev, i); + } + + event_notifier_cleanup(&vector->interrupt); + } + + g_free(vdev->msi_vectors); + vdev->msi_vectors = NULL; + vdev->nr_vectors = 0; + + if (!msix) { + msi_set_qsize(&vdev->pdev, 0); /* Actually still means 1 vector */ + } + + DPRINTF("%s(%04x:%02x:%02x.%x, msi%s)\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, msix ? "x" : ""); + + vfio_enable_intx(vdev); +} + +/* + * IO Port/MMIO - Beware of the endians, VFIO is always little endian + */ +static void vfio_bar_write(void *opaque, target_phys_addr_t addr, + uint64_t data, unsigned size) +{ + VFIOBAR *bar = opaque; + union { + uint8_t byte; + uint16_t word; + uint32_t dword; + uint64_t qword; + } buf; + + switch (size) { + case 1: + buf.byte = data; + break; + case 2: + buf.word = cpu_to_le16(data); + break; + case 4: + buf.dword = cpu_to_le32(data); + break; + default: + hw_error("vfio: unsupported write size, %d bytes\n", size); + break; + } + + if (pwrite(bar->fd, &buf, size, bar->fd_offset + addr) != size) { + error_report("%s(,0x%"TARGET_PRIxPHYS", 0x%"PRIx64", %d) failed: %m\n", + __func__, addr, data, size); + } + + DPRINTF("%s(BAR%d+0x%"TARGET_PRIxPHYS", 0x%"PRIx64", %d)\n", + __func__, bar->nr, addr, data, size); + + /* + * A read or write to a BAR always signals an INTx EOI. This will + * do nothing if not pending (including not in INTx mode). We assume + * that a BAR access is in response to an interrupt and that BAR + * accesses will service the interrupt. Unfortunately, we don't know + * which access will service the interrupt, so we're potentially + * getting quite a few host interrupts per guest interrupt. + */ + vfio_eoi(DO_UPCAST(VFIODevice, bars[bar->nr], bar)); +} + +static uint64_t vfio_bar_read(void *opaque, + target_phys_addr_t addr, unsigned size) +{ + VFIOBAR *bar = opaque; + union { + uint8_t byte; + uint16_t word; + uint32_t dword; + uint64_t qword; + } buf; + uint64_t data = 0; + + if (pread(bar->fd, &buf, size, bar->fd_offset + addr) != size) { + error_report("%s(,0x%"TARGET_PRIxPHYS", %d) failed: %m\n", + __func__, addr, size); + return (uint64_t)-1; + } + + switch (size) { + case 1: + data = buf.byte; + break; + case 2: + data = le16_to_cpu(buf.word); + break; + case 4: + data = le32_to_cpu(buf.dword); + break; + default: + hw_error("vfio: unsupported read size, %d bytes\n", size); + break; + } + + DPRINTF("%s(BAR%d+0x%"TARGET_PRIxPHYS", %d) = 0x%"PRIx64"\n", + __func__, bar->nr, addr, size, data); + + /* Same as write above */ + vfio_eoi(DO_UPCAST(VFIODevice, bars[bar->nr], bar)); + + return data; +} + +static const MemoryRegionOps vfio_bar_ops = { + .read = vfio_bar_read, + .write = vfio_bar_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +/* + * PCI config space + */ +static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + uint32_t val = 0; + + /* + * We only need QEMU PCI config support for the ROM BAR, the MSI and MSIX + * capabilities, and the multifunction bit below. We let VFIO handle + * virtualizing everything else. Performance is not a concern here. + */ + if (ranges_overlap(addr, len, PCI_ROM_ADDRESS, 4) || + (pdev->cap_present & QEMU_PCI_CAP_MSIX && + ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) || + (pdev->cap_present & QEMU_PCI_CAP_MSI && + ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size))) { + + val = pci_default_read_config(pdev, addr, len); + } else { + if (pread(vdev->fd, &val, len, vdev->config_offset + addr) != len) { + error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x) failed: %m\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, addr, len); + return -errno; + } + val = le32_to_cpu(val); + } + + /* Multifunction bit is virualized in QEMU */ + if (unlikely(ranges_overlap(addr, len, PCI_HEADER_TYPE, 1))) { + uint32_t mask = PCI_HEADER_TYPE_MULTI_FUNCTION; + + if (len == 4) { + mask <<= 16; + } + + if (pdev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) { + val |= mask; + } else { + val &= ~mask; + } + } + + DPRINTF("%s(%04x:%02x:%02x.%x, @0x%x, len=0x%x) %x\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, len, val); + + return val; +} + +static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr, + uint32_t val, int len) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + uint32_t val_le = cpu_to_le32(val); + + DPRINTF("%s(%04x:%02x:%02x.%x, @0x%x, 0x%x, len=0x%x)\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, val, len); + + /* Write everything to VFIO, let it filter out what we can't write */ + if (pwrite(vdev->fd, &val_le, len, vdev->config_offset + addr) != len) { + error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x, 0x%x) failed: %m\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, addr, val, len); + } + + /* Write standard header bits to emulation */ + if (addr < PCI_CONFIG_HEADER_SIZE) { + pci_default_write_config(pdev, addr, val, len); + return; + } + + /* MSI/MSI-X Enabling/Disabling */ + if (pdev->cap_present & QEMU_PCI_CAP_MSI && + ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size)) { + int is_enabled, was_enabled = msi_enabled(pdev); + + pci_default_write_config(pdev, addr, val, len); + + is_enabled = msi_enabled(pdev); + + if (!was_enabled && is_enabled) { + vfio_enable_msi(vdev); + } else if (was_enabled && !is_enabled) { + vfio_disable_msi_x(vdev, false); + } + } + + if (pdev->cap_present & QEMU_PCI_CAP_MSIX && + ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) { + int is_enabled, was_enabled = msix_enabled(pdev); + + pci_default_write_config(pdev, addr, val, len); + + is_enabled = msix_enabled(pdev); + + if (!was_enabled && is_enabled) { + /* vfio_msix_vector_use handles this automatically */ + } else if (was_enabled && !is_enabled) { + vfio_disable_msi_x(vdev, true); + } + } +} + +/* + * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86 + */ +static int vfio_dma_map(VFIOContainer *container, target_phys_addr_t iova, + ram_addr_t size, void *vaddr, bool readonly) +{ + struct vfio_iommu_type1_dma_map map = { + .argsz = sizeof(map), + .flags = VFIO_DMA_MAP_FLAG_READ, + .vaddr = (__u64)vaddr, + .iova = iova, + .size = size, + }; + + if (!readonly) { + map.flags |= VFIO_DMA_MAP_FLAG_WRITE; + } + + if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map)) { + DPRINTF("VFIO_MAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static int vfio_dma_unmap(VFIOContainer *container, + target_phys_addr_t iova, ram_addr_t size) +{ + struct vfio_iommu_type1_dma_unmap unmap = { + .argsz = sizeof(unmap), + .flags = 0, + .iova = iova, + .size = size, + }; + + if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) { + DPRINTF("VFIO_UNMAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static void vfio_listener_dummy1(MemoryListener *listener) +{ + /* We don't do batching (begin/commit) or care about logging */ +} + +static void vfio_listener_dummy2(MemoryListener *listener, + MemoryRegionSection *section) +{ + /* We don't do logging or care about nops */ +} + +static void vfio_listener_dummy3(MemoryListener *listener, + MemoryRegionSection *section, + bool match_data, uint64_t data, + EventNotifier *e) +{ + /* We don't care about eventfds */ +} + +static bool vfio_listener_skipped_section(MemoryRegionSection *section) +{ + return !memory_region_is_ram(section->mr); +} + +static void vfio_listener_region_add(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.listener); + target_phys_addr_t iova, end; + void *vaddr; + int ret; + + if (vfio_listener_skipped_section(section)) { + DPRINTF("vfio: SKIPPING region_add %"TARGET_PRIxPHYS" - %"PRIx64"\n", + section->offset_within_address_space, + section->offset_within_address_space + section->size - 1); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region\n", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + section->size) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + vaddr = memory_region_get_ram_ptr(section->mr) + + section->offset_within_region + + (iova - section->offset_within_address_space); + + DPRINTF("vfio: region_add %"TARGET_PRIxPHYS" - %"TARGET_PRIxPHYS" [%p]\n", + iova, end - 1, vaddr); + + ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly); + if (ret) { + error_report("vfio_dma_map(%p, 0x%"TARGET_PRIxPHYS", " + "0x%"TARGET_PRIxPHYS", %p) = %d (%m)\n", + container, iova, end - iova, vaddr, ret); + } +} + +static void vfio_listener_region_del(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.listener); + target_phys_addr_t iova, end; + int ret; + + if (vfio_listener_skipped_section(section)) { + DPRINTF("vfio: SKIPPING region_del %"TARGET_PRIxPHYS" - %"PRIx64"\n", + section->offset_within_address_space, + section->offset_within_address_space + section->size - 1); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region\n", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + section->size) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + DPRINTF("vfio: region_del %"TARGET_PRIxPHYS" - %"TARGET_PRIxPHYS"\n", + iova, end - 1); + + ret = vfio_dma_unmap(container, iova, end - iova); + if (ret) { + error_report("vfio_dma_unmap(%p, 0x%"TARGET_PRIxPHYS", " + "0x%"TARGET_PRIxPHYS") = %d (%m)\n", + container, iova, end - iova, ret); + } +} + +static MemoryListener vfio_memory_listener = { + .begin = vfio_listener_dummy1, + .commit = vfio_listener_dummy1, + .region_add = vfio_listener_region_add, + .region_del = vfio_listener_region_del, + .region_nop = vfio_listener_dummy2, + .log_start = vfio_listener_dummy2, + .log_stop = vfio_listener_dummy2, + .log_sync = vfio_listener_dummy2, + .log_global_start = vfio_listener_dummy1, + .log_global_stop = vfio_listener_dummy1, + .eventfd_add = vfio_listener_dummy3, + .eventfd_del = vfio_listener_dummy3, +}; + +static void vfio_listener_release(VFIOContainer *container) +{ + memory_listener_unregister(&container->iommu_data.listener); +} + +/* + * Interrupt setup + */ +static void vfio_disable_interrupts(VFIODevice *vdev) +{ + switch (vdev->interrupt) { + case VFIO_INT_INTx: + vfio_disable_intx(vdev); + break; + case VFIO_INT_MSI: + vfio_disable_msi_x(vdev, false); + break; + case VFIO_INT_MSIX: + vfio_disable_msi_x(vdev, true); + break; + } +} + +static int vfio_setup_msi(VFIODevice *vdev, int pos) +{ + uint16_t ctrl; + bool msi_64bit, msi_maskbit; + int ret, entries; + + /* + * TODO: don't peek into msi_supported, let msi_init fail and + * check for ENOTSUP + */ + if (!msi_supported) { + return 0; + } + + if (pread(vdev->fd, &ctrl, sizeof(ctrl), + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { + return -errno; + } + ctrl = le16_to_cpu(ctrl); + + msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT); + msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT); + entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1); + + DPRINTF("%04x:%02x:%02x.%x PCI MSI CAP @0x%x\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, pos); + + ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit); + if (ret < 0) { + error_report("vfio: msi_init failed\n"); + return ret; + } + vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0); + + return 0; +} + +/* + * We don't have any control over how pci_add_capability() inserts + * capabilities into the chain. In order to setup MSI-X we need a + * MemoryRegion for the BAR. In order to setup the BAR and not + * attempt to mmap the MSI-X table area, which VFIO won't allow, we + * need to first look for where the MSI-X table lives. So we + * unfortunately split MSI-X setup across two functions. + */ +static int vfio_early_setup_msix(VFIODevice *vdev) +{ + uint8_t pos; + uint16_t ctrl; + uint32_t table, pba; + + pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX); + if (!pos) { + return 0; + } + + if (pread(vdev->fd, &ctrl, sizeof(ctrl), + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { + return -errno; + } + + if (pread(vdev->fd, &table, sizeof(table), + vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) { + return -errno; + } + + if (pread(vdev->fd, &pba, sizeof(pba), + vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) { + return -errno; + } + + ctrl = le16_to_cpu(ctrl); + table = le32_to_cpu(table); + pba = le32_to_cpu(pba); + + vdev->msix = g_malloc0(sizeof(*(vdev->msix))); + vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1; + + DPRINTF("%04x:%02x:%02x.%x " + "PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d\n", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, pos, vdev->msix->table_bar, + vdev->msix->table_offset, vdev->msix->entries); + + return 0; +} + +static int vfio_setup_msix(VFIODevice *vdev, int pos) +{ + int ret; + + /* + * TODO: don't peek into msi_supported, let msix_init fail and + * check for ENOTSUP + */ + if (!msi_supported) { + return 0; + } + + ret = msix_init(&vdev->pdev, vdev->msix->entries, + &vdev->bars[vdev->msix->table_bar].mem, + vdev->msix->table_bar, vdev->msix->table_offset, + &vdev->bars[vdev->msix->pba_bar].mem, + vdev->msix->pba_bar, vdev->msix->pba_offset, pos); + if (ret < 0) { + error_report("vfio: msix_init failed\n"); + return ret; + } + + ret = msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use, + vfio_msix_vector_release); + if (ret) { + error_report("vfio: msix_set_vector_notifiers failed %d\n", ret); + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, + &vdev->bars[vdev->msix->pba_bar].mem); + return ret; + } + + return 0; +} + +static void vfio_teardown_msi(VFIODevice *vdev) +{ + msi_uninit(&vdev->pdev); + + if (vdev->msix) { + /* FIXME: Why can't unset just silently do nothing?? */ + if (vdev->pdev.msix_vector_use_notifier && + vdev->pdev.msix_vector_release_notifier) { + msix_unset_vector_notifiers(&vdev->pdev); + } + + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, + &vdev->bars[vdev->msix->pba_bar].mem); + } +} + +/* + * Resource setup + */ +static void vfio_mmap_set_enabled(VFIODevice *vdev, bool enabled) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + VFIOBAR *bar = &vdev->bars[i]; + + if (!bar->size) { + continue; + } + + memory_region_set_enabled(&bar->mmap_mem, enabled); + if (vdev->msix && vdev->msix->table_bar == i) { + memory_region_set_enabled(&vdev->msix->mmap_mem, enabled); + } + } +} + +static void vfio_unmap_bar(VFIODevice *vdev, int nr) +{ + VFIOBAR *bar = &vdev->bars[nr]; + + if (!bar->size) { + return; + } + + memory_region_del_subregion(&bar->mem, &bar->mmap_mem); + munmap(bar->mmap, memory_region_size(&bar->mmap_mem)); + + if (vdev->msix && vdev->msix->table_bar == nr) { + memory_region_del_subregion(&bar->mem, &vdev->msix->mmap_mem); + munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem)); + } + + memory_region_destroy(&bar->mem); +} + +static int vfio_mmap_bar(VFIOBAR *bar, MemoryRegion *mem, MemoryRegion *submem, + void **map, size_t size, off_t offset, + const char *name) +{ + int ret = 0; + + if (size && bar->flags & VFIO_REGION_INFO_FLAG_MMAP) { + int prot = 0; + + if (bar->flags & VFIO_REGION_INFO_FLAG_READ) { + prot |= PROT_READ; + } + + if (bar->flags & VFIO_REGION_INFO_FLAG_WRITE) { + prot |= PROT_WRITE; + } + + *map = mmap(NULL, size, prot, MAP_SHARED, + bar->fd, bar->fd_offset + offset); + if (*map == MAP_FAILED) { + *map = NULL; + ret = -errno; + goto empty_region; + } + + memory_region_init_ram_ptr(submem, name, size, *map); + } else { +empty_region: + /* Create a zero sized sub-region to make cleanup easy. */ + memory_region_init(submem, name, 0); + } + + memory_region_add_subregion(mem, offset, submem); + + return ret; +} + +static void vfio_map_bar(VFIODevice *vdev, int nr) +{ + VFIOBAR *bar = &vdev->bars[nr]; + unsigned size = bar->size; + char name[64]; + uint32_t pci_bar; + uint8_t type; + int ret; + + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ + if (!size) { + return; + } + + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + /* Determine what type of BAR this is for registration */ + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); + if (ret != sizeof(pci_bar)) { + error_report("vfio: Failed to read BAR %d (%m)\n", nr); + return; + } + + pci_bar = le32_to_cpu(pci_bar); + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); + + /* A "slow" read/write mapping underlies all BARs */ + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); + + /* + * We can't mmap areas overlapping the MSIX vector table, so we + * potentially insert a direct-mapped subregion before and after it. + */ + if (vdev->msix && vdev->msix->table_bar == nr) { + size = vdev->msix->table_offset & TARGET_PAGE_MASK; + } + + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); + if (vfio_mmap_bar(bar, &bar->mem, + &bar->mmap_mem, &bar->mmap, size, 0, name)) { + error_report("%s unsupported. Performance may be slow\n", name); + } + + if (vdev->msix && vdev->msix->table_bar == nr) { + unsigned start; + + start = TARGET_PAGE_ALIGN(vdev->msix->table_offset + + (vdev->msix->entries * PCI_MSIX_ENTRY_SIZE)); + + size = start < bar->size ? bar->size - start : 0; + strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1); + /* VFIOMSIXInfo contains another MemoryRegion for this mapping */ + if (vfio_mmap_bar(bar, &bar->mem, &vdev->msix->mmap_mem, + &vdev->msix->mmap, size, start, name)) { + error_report("%s unsupported. Performance may be slow\n", name); + } + } +} + +static void vfio_map_bars(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + vfio_map_bar(vdev, i); + } +} + +static void vfio_unmap_bars(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + vfio_unmap_bar(vdev, i); + } +} + +/* + * General setup + */ +static uint8_t vfio_std_cap_max_size(PCIDevice *pdev, uint8_t pos) +{ + uint8_t tmp, next = 0xff; + + for (tmp = pdev->config[PCI_CAPABILITY_LIST]; tmp; + tmp = pdev->config[tmp + 1]) { + if (tmp > pos && tmp < next) { + next = tmp; + } + } + + return next - pos; +} + +static int vfio_add_std_cap(VFIODevice *vdev, uint8_t pos) +{ + PCIDevice *pdev = &vdev->pdev; + uint8_t cap_id, next, size; + int ret; + + cap_id = pdev->config[pos]; + next = pdev->config[pos + 1]; + + /* + * If it becomes important to configure capabilities to their actual + * size, use this as the default when it's something we don't recognize. + * Since QEMU doesn't actually handle many of the config accesses, + * exact size doesn't seem worthwhile. + */ + size = vfio_std_cap_max_size(pdev, pos); + + /* + * pci_add_capability always inserts the new capability at the head + * of the chain. Therefore to end up with a chain that matches the + * physical device, we insert from the end by making this recursive. + * This is also why we pre-caclulate size above as cached config space + * will be changed as we unwind the stack. + */ + if (next) { + ret = vfio_add_std_cap(vdev, next); + if (ret) { + return ret; + } + } else { + pdev->config[PCI_CAPABILITY_LIST] = 0; /* Begin the rebuild */ + } + + switch (cap_id) { + case PCI_CAP_ID_MSI: + ret = vfio_setup_msi(vdev, pos); + break; + case PCI_CAP_ID_MSIX: + ret = vfio_setup_msix(vdev, pos); + break; + default: + ret = pci_add_capability(pdev, cap_id, pos, size); + break; + } + + if (ret < 0) { + error_report("vfio: %04x:%02x:%02x.%x Error adding PCI capability " + "0x%x[0x%x]@0x%x: %d\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + cap_id, size, pos, ret); + return ret; + } + + return 0; +} + +static int vfio_add_capabilities(VFIODevice *vdev) +{ + PCIDevice *pdev = &vdev->pdev; + + if (!(pdev->config[PCI_STATUS] & PCI_STATUS_CAP_LIST) || + !pdev->config[PCI_CAPABILITY_LIST]) { + return 0; /* Nothing to add */ + } + + return vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST]); +} + +static int vfio_load_rom(VFIODevice *vdev) +{ + uint64_t size = vdev->rom_size; + char name[32]; + off_t off = 0, voff = vdev->rom_offset; + ssize_t bytes; + void *ptr; + + /* If loading ROM from file, pci handles it */ + if (vdev->pdev.romfile || !vdev->pdev.rom_bar || !size) { + return 0; + } + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + snprintf(name, sizeof(name), "vfio[%04x:%02x:%02x.%x].rom", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + memory_region_init_ram(&vdev->pdev.rom, name, size); + ptr = memory_region_get_ram_ptr(&vdev->pdev.rom); + memset(ptr, 0xff, size); + + while (size) { + bytes = pread(vdev->fd, ptr + off, size, voff + off); + if (bytes == 0) { + break; /* expect that we could get back less than the ROM BAR */ + } else if (bytes > 0) { + off += bytes; + size -= bytes; + } else { + if (errno == EINTR || errno == EAGAIN) { + continue; + } + error_report("vfio: Error reading device ROM: %m\n"); + memory_region_destroy(&vdev->pdev.rom); + return -errno; + } + } + + pci_register_bar(&vdev->pdev, PCI_ROM_SLOT, 0, &vdev->pdev.rom); + vdev->pdev.has_rom = true; + return 0; +} + +static int vfio_connect_container(VFIOGroup *group) +{ + VFIOContainer *container; + int ret, fd; + + if (group->container) { + return 0; + } + + QLIST_FOREACH(container, &container_list, next) { + if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) { + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + return 0; + } + } + + fd = qemu_open("/dev/vfio/vfio", O_RDWR); + if (fd < 0) { + error_report("vfio: failed to open /dev/vfio/vfio: %m\n"); + return -errno; + } + + ret = ioctl(fd, VFIO_GET_API_VERSION); + if (ret != VFIO_API_VERSION) { + error_report("vfio: supported vfio version: %d, " + "reported version: %d\n", VFIO_API_VERSION, ret); + close(fd); + return -EINVAL; + } + + container = g_malloc0(sizeof(*container)); + container->fd = fd; + + if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) { + ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd); + if (ret) { + error_report("vfio: failed to set group container: %m\n"); + g_free(container); + close(fd); + return -errno; + } + + ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU); + if (ret) { + error_report("vfio: failed to set iommu for container: %m\n"); + g_free(container); + close(fd); + return -errno; + } + + container->iommu_data.listener = vfio_memory_listener; + container->iommu_data.release = vfio_listener_release; + + memory_listener_register(&container->iommu_data.listener, + get_system_memory()); + } else { + error_report("vfio: No available IOMMU models\n"); + g_free(container); + close(fd); + return -EINVAL; + } + + QLIST_INIT(&container->group_list); + QLIST_INSERT_HEAD(&container_list, container, next); + + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + + return 0; +} + +static void vfio_disconnect_container(VFIOGroup *group) +{ + VFIOContainer *container = group->container; + + if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) { + error_report("vfio: error disconnecting group %d from container\n", + group->groupid); + } + + QLIST_REMOVE(group, container_next); + group->container = NULL; + + if (QLIST_EMPTY(&container->group_list)) { + if (container->iommu_data.release) { + container->iommu_data.release(container); + } + QLIST_REMOVE(container, next); + DPRINTF("vfio_disconnect_container: close container->fd\n"); + close(container->fd); + g_free(container); + } +} + +static VFIOGroup *vfio_get_group(int groupid) +{ + VFIOGroup *group; + char path[32]; + struct vfio_group_status status = { .argsz = sizeof(status) }; + + QLIST_FOREACH(group, &group_list, next) { + if (group->groupid == groupid) { + return group; + } + } + + group = g_malloc0(sizeof(*group)); + + snprintf(path, sizeof(path), "/dev/vfio/%d", groupid); + group->fd = qemu_open(path, O_RDWR); + if (group->fd < 0) { + error_report("vfio: error opening %s: %m\n", path); + g_free(group); + return NULL; + } + + if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) { + error_report("vfio: error getting group status: %m\n"); + close(group->fd); + g_free(group); + return NULL; + } + + if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) { + error_report("vfio: error, group %d is not viable, please ensure " + "all devices within the iommu_group are bound to their " + "vfio bus driver.\n", groupid); + close(group->fd); + g_free(group); + return NULL; + } + + group->groupid = groupid; + QLIST_INIT(&group->device_list); + + if (vfio_connect_container(group)) { + error_report("vfio: failed to setup container for group %d\n", groupid); + close(group->fd); + g_free(group); + return NULL; + } + + QLIST_INSERT_HEAD(&group_list, group, next); + + return group; +} + +static void vfio_put_group(VFIOGroup *group) +{ + if (!QLIST_EMPTY(&group->device_list)) { + return; + } + + vfio_disconnect_container(group); + QLIST_REMOVE(group, next); + DPRINTF("vfio_put_group: close group->fd\n"); + close(group->fd); + g_free(group); +} + +static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev) +{ + struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) }; + struct vfio_region_info reg_info = { .argsz = sizeof(reg_info) }; + int ret, i; + + ret = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name); + if (ret < 0) { + error_report("vfio: error getting device %s from group %d: %m\n", + name, group->groupid); + error_report("Verify all devices in group %d are bound to vfio-pci " + "or pci-stub and not already in use\n", group->groupid); + return ret; + } + + vdev->fd = ret; + vdev->group = group; + QLIST_INSERT_HEAD(&group->device_list, vdev, next); + + /* Sanity check device */ + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_INFO, &dev_info); + if (ret) { + error_report("vfio: error getting device info: %m\n"); + goto error; + } + + DPRINTF("Device %s flags: %u, regions: %u, irgs: %u\n", name, + dev_info.flags, dev_info.num_regions, dev_info.num_irqs); + + if (!(dev_info.flags & VFIO_DEVICE_FLAGS_PCI)) { + error_report("vfio: Um, this isn't a PCI device\n"); + goto error; + } + + vdev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET); + if (!vdev->reset_works) { + error_report("Warning, device %s does not support reset\n", name); + } + + if (dev_info.num_regions != VFIO_PCI_NUM_REGIONS) { + error_report("vfio: unexpected number of io regions %u\n", + dev_info.num_regions); + goto error; + } + + if (dev_info.num_irqs != VFIO_PCI_NUM_IRQS) { + error_report("vfio: unexpected number of irqs %u\n", dev_info.num_irqs); + goto error; + } + + for (i = VFIO_PCI_BAR0_REGION_INDEX; i < VFIO_PCI_ROM_REGION_INDEX; i++) { + reg_info.index = i; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting region %d info: %m\n", i); + goto error; + } + + DPRINTF("Device %s region %d:\n", name, i); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->bars[i].flags = reg_info.flags; + vdev->bars[i].size = reg_info.size; + vdev->bars[i].fd_offset = reg_info.offset; + vdev->bars[i].fd = vdev->fd; + vdev->bars[i].nr = i; + } + + reg_info.index = VFIO_PCI_ROM_REGION_INDEX; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting ROM info: %m\n"); + goto error; + } + + DPRINTF("Device %s ROM:\n", name); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->rom_size = reg_info.size; + vdev->rom_offset = reg_info.offset; + + reg_info.index = VFIO_PCI_CONFIG_REGION_INDEX; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting config info: %m\n"); + goto error; + } + + DPRINTF("Device %s config:\n", name); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->config_size = reg_info.size; + vdev->config_offset = reg_info.offset; + +error: + if (ret) { + QLIST_REMOVE(vdev, next); + vdev->group = NULL; + close(vdev->fd); + } + return ret; +} + +static void vfio_put_device(VFIODevice *vdev) +{ + QLIST_REMOVE(vdev, next); + vdev->group = NULL; + DPRINTF("vfio_put_device: close vdev->fd\n"); + close(vdev->fd); + if (vdev->msix) { + g_free(vdev->msix); + vdev->msix = NULL; + } +} + +static int vfio_initfn(PCIDevice *pdev) +{ + VFIODevice *pvdev, *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOGroup *group; + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name; + ssize_t len; + struct stat st; + int groupid; + int ret; + + /* Check that the host device exists */ + snprintf(path, sizeof(path), + "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + if (stat(path, &st) < 0) { + error_report("vfio: error: no such host device: %s\n", path); + return -errno; + } + + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1); + + len = readlink(path, iommu_group_path, PATH_MAX); + if (len <= 0) { + error_report("vfio: error no iommu_group for device\n"); + return -errno; + } + + iommu_group_path[len] = 0; + group_name = basename(iommu_group_path); + + if (sscanf(group_name, "%d", &groupid) != 1) { + error_report("vfio: error reading %s: %m\n", path); + return -errno; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) group %d\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, groupid); + + group = vfio_get_group(groupid); + if (!group) { + error_report("vfio: failed to get group %d\n", groupid); + return -ENOENT; + } + + snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + + QLIST_FOREACH(pvdev, &group->device_list, next) { + if (pvdev->host.domain == vdev->host.domain && + pvdev->host.bus == vdev->host.bus && + pvdev->host.slot == vdev->host.slot && + pvdev->host.function == vdev->host.function) { + + error_report("vfio: error: device %s is already attached\n", path); + vfio_put_group(group); + return -EBUSY; + } + } + + ret = vfio_get_device(group, path, vdev); + if (ret) { + error_report("vfio: failed to get device %s\n", path); + vfio_put_group(group); + return ret; + } + + /* Get a copy of config space */ + ret = pread(vdev->fd, vdev->pdev.config, + MIN(pci_config_size(&vdev->pdev), vdev->config_size), + vdev->config_offset); + if (ret < (int)MIN(pci_config_size(&vdev->pdev), vdev->config_size)) { + ret = ret < 0 ? -errno : -EFAULT; + error_report("vfio: Failed to read device config space\n"); + goto out_put; + } + + /* + * Clear host resource mapping info. If we choose not to register a + * BAR, such as might be the case with the option ROM, we can get + * confusing, unwritable, residual addresses from the host here. + */ + memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); + memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); + + vfio_load_rom(vdev); + + ret = vfio_early_setup_msix(vdev); + if (ret) { + goto out_put; + } + + vfio_map_bars(vdev); + + ret = vfio_add_capabilities(vdev); + if (ret) { + goto out_teardown; + } + + if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) { + if (vdev->intx.intx && strcmp(vdev->intx.intx, "off")) { + error_report("vfio: Unknown option x-intx=%s, " + "valid options: \"off\".\n", vdev->intx.intx); + ret = -EINVAL; + goto out_teardown; + } + + if (vdev->intx.intx && !strcmp(vdev->intx.intx, "off")) { + vdev->intx.disabled = true; + } + + ret = vfio_enable_intx(vdev); + if (ret) { + goto out_teardown; + } + } + + return 0; + +out_teardown: + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); + vfio_teardown_msi(vdev); + vfio_unmap_bars(vdev); +out_put: + vfio_put_device(vdev); + vfio_put_group(group); + return ret; +} + +static void vfio_exitfn(PCIDevice *pdev) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOGroup *group = vdev->group; + + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); + vfio_disable_interrupts(vdev); + vfio_teardown_msi(vdev); + vfio_unmap_bars(vdev); + vfio_put_device(vdev); + vfio_put_group(group); +} + +static void vfio_pci_reset(DeviceState *dev) +{ + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + + if (!vdev->reset_works) { + return; + } + + if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { + error_report("vfio: Error unable to reset physical device " + "(%04x:%02x:%02x.%x): %m\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + } +} + +static Property vfio_pci_dev_properties[] = { + DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIODevice, host), + DEFINE_PROP_STRING("x-intx", VFIODevice, intx.intx), + /* + * TODO - support passed fds... is this necessary? + * DEFINE_PROP_STRING("vfiofd", VFIODevice, vfiofd_name), + * DEFINE_PROP_STRING("vfiogroupfd, VFIODevice, vfiogroupfd_name), + */ + DEFINE_PROP_END_OF_LIST(), +}; + + +static void vfio_pci_dev_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + PCIDeviceClass *pdc = PCI_DEVICE_CLASS(klass); + + dc->reset = vfio_pci_reset; + dc->props = vfio_pci_dev_properties; + pdc->init = vfio_initfn; + pdc->exit = vfio_exitfn; + pdc->config_read = vfio_pci_read_config; + pdc->config_write = vfio_pci_write_config; +} + +static const TypeInfo vfio_pci_dev_info = { + .name = "vfio-pci", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(VFIODevice), + .class_init = vfio_pci_dev_class_init, +}; + +static void register_vfio_pci_dev_type(void) +{ + type_register_static(&vfio_pci_dev_info); +} + +type_init(register_vfio_pci_dev_type) diff --git a/hw/vfio_pci_int.h b/hw/vfio_pci_int.h new file mode 100644 index 0000000..3812d8d --- /dev/null +++ b/hw/vfio_pci_int.h @@ -0,0 +1,114 @@ +/* + * vfio based device assignment support + * + * Copyright Red Hat, Inc. 2012 + * + * Authors: + * Alex Williamson <alex.williamson@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + */ + +#ifndef HW_VFIO_PCI_INT_H +#define HW_VFIO_PCI_INT_H + +#include "qemu-common.h" +#include "qemu-queue.h" +#include "pci.h" +#include "event_notifier.h" + +typedef struct VFIOBAR { + off_t fd_offset; /* offset of BAR within device fd */ + int fd; /* device fd, allows us to pass VFIOBAR as opaque data */ + MemoryRegion mem; /* slow, read/write access */ + MemoryRegion mmap_mem; /* direct mapped access */ + void *mmap; + size_t size; + uint32_t flags; /* VFIO region flags (rd/wr/mmap) */ + uint8_t nr; /* cache the BAR number for debug */ +} VFIOBAR; + +typedef struct VFIOINTx { + bool pending; /* interrupt pending */ + bool kvm_accel; /* set when QEMU bypass through KVM enabled */ + uint8_t pin; /* which pin to pull for qemu_set_irq */ + EventNotifier interrupt; /* eventfd triggered on interrupt */ + EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ + PCIINTxRoute route; /* routing info for QEMU bypass */ + bool disabled; + char *intx; +} VFIOINTx; + +struct VFIODevice; + +typedef struct VFIOMSIVector { + EventNotifier interrupt; /* eventfd triggered on interrupt */ + struct VFIODevice *vdev; /* back pointer to device */ + int virq; /* KVM irqchip route for QEMU bypass */ + bool use; +} VFIOMSIVector; + +enum { + VFIO_INT_NONE = 0, + VFIO_INT_INTx = 1, + VFIO_INT_MSI = 2, + VFIO_INT_MSIX = 3, +}; + +struct VFIOGroup; + +typedef struct VFIOContainer { + int fd; /* /dev/vfio/vfio, empowered by the attached groups */ + struct { + /* enable abstraction to support various iommu backends */ + union { + MemoryListener listener; /* Used by type1 iommu */ + }; + void (*release)(struct VFIOContainer *); + } iommu_data; + QLIST_HEAD(, VFIOGroup) group_list; + QLIST_ENTRY(VFIOContainer) next; +} VFIOContainer; + +/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */ +typedef struct VFIOMSIXInfo { + uint8_t table_bar; + uint8_t pba_bar; + uint16_t entries; + uint32_t table_offset; + uint32_t pba_offset; + MemoryRegion mmap_mem; + void *mmap; +} VFIOMSIXInfo; + +typedef struct VFIODevice { + PCIDevice pdev; + int fd; + VFIOINTx intx; + unsigned int config_size; + off_t config_offset; /* Offset of config space region within device fd */ + unsigned int rom_size; + off_t rom_offset; /* Offset of ROM region within device fd */ + int msi_cap_size; + VFIOMSIVector *msi_vectors; + VFIOMSIXInfo *msix; + int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ + int interrupt; /* Current interrupt type */ + VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ + PCIHostDeviceAddress host; + QLIST_ENTRY(VFIODevice) next; + struct VFIOGroup *group; + bool reset_works; +} VFIODevice; + +typedef struct VFIOGroup { + int fd; + int groupid; + VFIOContainer *container; + QLIST_HEAD(, VFIODevice) device_list; + QLIST_ENTRY(VFIOGroup) next; + QLIST_ENTRY(VFIOGroup) container_next; +} VFIOGroup; + +#endif /* HW_VFIO_PCI_INT_H */ ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson @ 2012-09-26 3:38 ` Alex Williamson -1 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik, alex.williamson Enabled for all softmmu guests supporting PCI on Linux hosts. Note that currently only x86 hosts have the kernel side VFIO IOMMU support for this. PPC (g3beige) is the only non-x86 guest known to work. ARM (veratile) hangs in firmware, others untested. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> --- MAINTAINERS | 5 +++++ configure | 6 ++++++ hw/Makefile.objs | 3 ++- 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 25733fc..29aac4f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> S: Maintained F: hw/usb* +VFIO +M: Alex Williamson <alex.williamson@redhat.com> +S: Supported +F: hw/vfio* + vhost M: Michael S. Tsirkin <mst@redhat.com> S: Supported diff --git a/configure b/configure index 1b86517..c2c0d4f 100755 --- a/configure +++ b/configure @@ -165,6 +165,7 @@ attr="" libattr="" xfs="" +vfio_pci="no" vhost_net="no" kvm="no" gprof="no" @@ -509,6 +510,7 @@ Haiku) usb="linux" kvm="yes" vhost_net="yes" + vfio_pci="yes" if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then audio_possible_drivers="$audio_possible_drivers fmod" fi @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" echo "build guest agent $guest_agent" echo "seccomp support $seccomp" echo "coroutine backend $coroutine_backend" +echo "VFIO PCI support $vfio_pci" if test "$sdl_too_old" = "yes"; then echo "-> Your SDL version is too old - please upgrade to have SDL support" @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then if test "$smartcard_nss" = "yes" ; then echo "subdir-$target: subdir-libcacard" >> $config_host_mak fi + if test "$vfio_pci" = "yes" ; then + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak + fi case "$target_arch2" in i386|x86_64) echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak diff --git a/hw/Makefile.objs b/hw/Makefile.objs index 6dfebd2..7f8d3e4 100644 --- a/hw/Makefile.objs +++ b/hw/Makefile.objs @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o obj-$(CONFIG_SOFTMMU) += device-hotplug.o obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o -# Inter-VM PCI shared memory +# Inter-VM PCI shared memory & VFIO PCI device assignment ifeq ($(CONFIG_PCI), y) obj-$(CONFIG_KVM) += ivshmem.o +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o endif ^ permalink raw reply related [flat|nested] 18+ messages in thread
* [Qemu-devel] [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported @ 2012-09-26 3:38 ` Alex Williamson 0 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 3:38 UTC (permalink / raw) To: aliguori; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, alex.williamson, avi Enabled for all softmmu guests supporting PCI on Linux hosts. Note that currently only x86 hosts have the kernel side VFIO IOMMU support for this. PPC (g3beige) is the only non-x86 guest known to work. ARM (veratile) hangs in firmware, others untested. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> --- MAINTAINERS | 5 +++++ configure | 6 ++++++ hw/Makefile.objs | 3 ++- 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 25733fc..29aac4f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> S: Maintained F: hw/usb* +VFIO +M: Alex Williamson <alex.williamson@redhat.com> +S: Supported +F: hw/vfio* + vhost M: Michael S. Tsirkin <mst@redhat.com> S: Supported diff --git a/configure b/configure index 1b86517..c2c0d4f 100755 --- a/configure +++ b/configure @@ -165,6 +165,7 @@ attr="" libattr="" xfs="" +vfio_pci="no" vhost_net="no" kvm="no" gprof="no" @@ -509,6 +510,7 @@ Haiku) usb="linux" kvm="yes" vhost_net="yes" + vfio_pci="yes" if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then audio_possible_drivers="$audio_possible_drivers fmod" fi @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" echo "build guest agent $guest_agent" echo "seccomp support $seccomp" echo "coroutine backend $coroutine_backend" +echo "VFIO PCI support $vfio_pci" if test "$sdl_too_old" = "yes"; then echo "-> Your SDL version is too old - please upgrade to have SDL support" @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then if test "$smartcard_nss" = "yes" ; then echo "subdir-$target: subdir-libcacard" >> $config_host_mak fi + if test "$vfio_pci" = "yes" ; then + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak + fi case "$target_arch2" in i386|x86_64) echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak diff --git a/hw/Makefile.objs b/hw/Makefile.objs index 6dfebd2..7f8d3e4 100644 --- a/hw/Makefile.objs +++ b/hw/Makefile.objs @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o obj-$(CONFIG_SOFTMMU) += device-hotplug.o obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o -# Inter-VM PCI shared memory +# Inter-VM PCI shared memory & VFIO PCI device assignment ifeq ($(CONFIG_PCI), y) obj-$(CONFIG_KVM) += ivshmem.o +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o endif ^ permalink raw reply related [flat|nested] 18+ messages in thread
* Re: [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson @ 2012-09-26 13:50 ` Anthony Liguori -1 siblings, 0 replies; 18+ messages in thread From: Anthony Liguori @ 2012-09-26 13:50 UTC (permalink / raw) To: Alex Williamson Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik, alex.williamson Alex Williamson <alex.williamson@redhat.com> writes: > Enabled for all softmmu guests supporting PCI on Linux hosts. Note > that currently only x86 hosts have the kernel side VFIO IOMMU support > for this. PPC (g3beige) is the only non-x86 guest known to work. > ARM (veratile) hangs in firmware, others untested. > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> > Acked-by: Michael S. Tsirkin <mst@redhat.com> > --- > > MAINTAINERS | 5 +++++ > configure | 6 ++++++ > hw/Makefile.objs | 3 ++- > 3 files changed, 13 insertions(+), 1 deletion(-) > > diff --git a/MAINTAINERS b/MAINTAINERS > index 25733fc..29aac4f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> > S: Maintained > F: hw/usb* > > +VFIO > +M: Alex Williamson <alex.williamson@redhat.com> > +S: Supported > +F: hw/vfio* > + > vhost > M: Michael S. Tsirkin <mst@redhat.com> > S: Supported > diff --git a/configure b/configure > index 1b86517..c2c0d4f 100755 > --- a/configure > +++ b/configure > @@ -165,6 +165,7 @@ attr="" > libattr="" > xfs="" > > +vfio_pci="no" > vhost_net="no" > kvm="no" > gprof="no" > @@ -509,6 +510,7 @@ Haiku) > usb="linux" > kvm="yes" > vhost_net="yes" > + vfio_pci="yes" > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then > audio_possible_drivers="$audio_possible_drivers fmod" > fi > @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" > echo "build guest agent $guest_agent" > echo "seccomp support $seccomp" > echo "coroutine backend $coroutine_backend" > +echo "VFIO PCI support $vfio_pci" > > if test "$sdl_too_old" = "yes"; then > echo "-> Your SDL version is too old - please upgrade to have SDL support" > @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then > if test "$smartcard_nss" = "yes" ; then > echo "subdir-$target: subdir-libcacard" >> $config_host_mak > fi > + if test "$vfio_pci" = "yes" ; then > + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak > + fi > case "$target_arch2" in > i386|x86_64) > echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak > diff --git a/hw/Makefile.objs b/hw/Makefile.objs > index 6dfebd2..7f8d3e4 100644 > --- a/hw/Makefile.objs > +++ b/hw/Makefile.objs > @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o > obj-$(CONFIG_SOFTMMU) += device-hotplug.o > obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o > > -# Inter-VM PCI shared memory > +# Inter-VM PCI shared memory & VFIO PCI device assignment > ifeq ($(CONFIG_PCI), y) > obj-$(CONFIG_KVM) += ivshmem.o > +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o Why not just make this obj-$(CONFIG_LINUX) += vfio_pci.o ? All you're doing in configure is setting CONFIG_VFIO_PCI if CONFIG_LINUX. Regards, Anthony Liguori > endif > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Qemu-devel] [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported @ 2012-09-26 13:50 ` Anthony Liguori 0 siblings, 0 replies; 18+ messages in thread From: Anthony Liguori @ 2012-09-26 13:50 UTC (permalink / raw) To: Alex Williamson; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, avi Alex Williamson <alex.williamson@redhat.com> writes: > Enabled for all softmmu guests supporting PCI on Linux hosts. Note > that currently only x86 hosts have the kernel side VFIO IOMMU support > for this. PPC (g3beige) is the only non-x86 guest known to work. > ARM (veratile) hangs in firmware, others untested. > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> > Acked-by: Michael S. Tsirkin <mst@redhat.com> > --- > > MAINTAINERS | 5 +++++ > configure | 6 ++++++ > hw/Makefile.objs | 3 ++- > 3 files changed, 13 insertions(+), 1 deletion(-) > > diff --git a/MAINTAINERS b/MAINTAINERS > index 25733fc..29aac4f 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> > S: Maintained > F: hw/usb* > > +VFIO > +M: Alex Williamson <alex.williamson@redhat.com> > +S: Supported > +F: hw/vfio* > + > vhost > M: Michael S. Tsirkin <mst@redhat.com> > S: Supported > diff --git a/configure b/configure > index 1b86517..c2c0d4f 100755 > --- a/configure > +++ b/configure > @@ -165,6 +165,7 @@ attr="" > libattr="" > xfs="" > > +vfio_pci="no" > vhost_net="no" > kvm="no" > gprof="no" > @@ -509,6 +510,7 @@ Haiku) > usb="linux" > kvm="yes" > vhost_net="yes" > + vfio_pci="yes" > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then > audio_possible_drivers="$audio_possible_drivers fmod" > fi > @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" > echo "build guest agent $guest_agent" > echo "seccomp support $seccomp" > echo "coroutine backend $coroutine_backend" > +echo "VFIO PCI support $vfio_pci" > > if test "$sdl_too_old" = "yes"; then > echo "-> Your SDL version is too old - please upgrade to have SDL support" > @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then > if test "$smartcard_nss" = "yes" ; then > echo "subdir-$target: subdir-libcacard" >> $config_host_mak > fi > + if test "$vfio_pci" = "yes" ; then > + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak > + fi > case "$target_arch2" in > i386|x86_64) > echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak > diff --git a/hw/Makefile.objs b/hw/Makefile.objs > index 6dfebd2..7f8d3e4 100644 > --- a/hw/Makefile.objs > +++ b/hw/Makefile.objs > @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o > obj-$(CONFIG_SOFTMMU) += device-hotplug.o > obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o > > -# Inter-VM PCI shared memory > +# Inter-VM PCI shared memory & VFIO PCI device assignment > ifeq ($(CONFIG_PCI), y) > obj-$(CONFIG_KVM) += ivshmem.o > +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o Why not just make this obj-$(CONFIG_LINUX) += vfio_pci.o ? All you're doing in configure is setting CONFIG_VFIO_PCI if CONFIG_LINUX. Regards, Anthony Liguori > endif > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported 2012-09-26 13:50 ` [Qemu-devel] " Anthony Liguori @ 2012-09-26 14:15 ` Alex Williamson -1 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 14:15 UTC (permalink / raw) To: Anthony Liguori; +Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik On Wed, 2012-09-26 at 08:50 -0500, Anthony Liguori wrote: > Alex Williamson <alex.williamson@redhat.com> writes: > > > Enabled for all softmmu guests supporting PCI on Linux hosts. Note > > that currently only x86 hosts have the kernel side VFIO IOMMU support > > for this. PPC (g3beige) is the only non-x86 guest known to work. > > ARM (veratile) hangs in firmware, others untested. > > > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> > > Acked-by: Michael S. Tsirkin <mst@redhat.com> > > --- > > > > MAINTAINERS | 5 +++++ > > configure | 6 ++++++ > > hw/Makefile.objs | 3 ++- > > 3 files changed, 13 insertions(+), 1 deletion(-) > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 25733fc..29aac4f 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> > > S: Maintained > > F: hw/usb* > > > > +VFIO > > +M: Alex Williamson <alex.williamson@redhat.com> > > +S: Supported > > +F: hw/vfio* > > + > > vhost > > M: Michael S. Tsirkin <mst@redhat.com> > > S: Supported > > diff --git a/configure b/configure > > index 1b86517..c2c0d4f 100755 > > --- a/configure > > +++ b/configure > > @@ -165,6 +165,7 @@ attr="" > > libattr="" > > xfs="" > > > > +vfio_pci="no" > > vhost_net="no" > > kvm="no" > > gprof="no" > > @@ -509,6 +510,7 @@ Haiku) > > usb="linux" > > kvm="yes" > > vhost_net="yes" > > + vfio_pci="yes" > > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then > > audio_possible_drivers="$audio_possible_drivers fmod" > > fi > > @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" > > echo "build guest agent $guest_agent" > > echo "seccomp support $seccomp" > > echo "coroutine backend $coroutine_backend" > > +echo "VFIO PCI support $vfio_pci" > > > > if test "$sdl_too_old" = "yes"; then > > echo "-> Your SDL version is too old - please upgrade to have SDL support" > > @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then > > if test "$smartcard_nss" = "yes" ; then > > echo "subdir-$target: subdir-libcacard" >> $config_host_mak > > fi > > + if test "$vfio_pci" = "yes" ; then > > + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak > > + fi > > case "$target_arch2" in > > i386|x86_64) > > echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak > > diff --git a/hw/Makefile.objs b/hw/Makefile.objs > > index 6dfebd2..7f8d3e4 100644 > > --- a/hw/Makefile.objs > > +++ b/hw/Makefile.objs > > @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o > > obj-$(CONFIG_SOFTMMU) += device-hotplug.o > > obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o > > > > -# Inter-VM PCI shared memory > > +# Inter-VM PCI shared memory & VFIO PCI device assignment > > ifeq ($(CONFIG_PCI), y) > > obj-$(CONFIG_KVM) += ivshmem.o > > +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o > > Why not just make this > > obj-$(CONFIG_LINUX) += vfio_pci.o > > ? > > All you're doing in configure is setting CONFIG_VFIO_PCI if > CONFIG_LINUX. Ok. I thought I needed linux + softmmu + pci, but maybe the softmmu is implied with CONFIG_PCI? Thanks, Alex ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Qemu-devel] [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported @ 2012-09-26 14:15 ` Alex Williamson 0 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 14:15 UTC (permalink / raw) To: Anthony Liguori; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, avi On Wed, 2012-09-26 at 08:50 -0500, Anthony Liguori wrote: > Alex Williamson <alex.williamson@redhat.com> writes: > > > Enabled for all softmmu guests supporting PCI on Linux hosts. Note > > that currently only x86 hosts have the kernel side VFIO IOMMU support > > for this. PPC (g3beige) is the only non-x86 guest known to work. > > ARM (veratile) hangs in firmware, others untested. > > > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> > > Acked-by: Michael S. Tsirkin <mst@redhat.com> > > --- > > > > MAINTAINERS | 5 +++++ > > configure | 6 ++++++ > > hw/Makefile.objs | 3 ++- > > 3 files changed, 13 insertions(+), 1 deletion(-) > > > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 25733fc..29aac4f 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> > > S: Maintained > > F: hw/usb* > > > > +VFIO > > +M: Alex Williamson <alex.williamson@redhat.com> > > +S: Supported > > +F: hw/vfio* > > + > > vhost > > M: Michael S. Tsirkin <mst@redhat.com> > > S: Supported > > diff --git a/configure b/configure > > index 1b86517..c2c0d4f 100755 > > --- a/configure > > +++ b/configure > > @@ -165,6 +165,7 @@ attr="" > > libattr="" > > xfs="" > > > > +vfio_pci="no" > > vhost_net="no" > > kvm="no" > > gprof="no" > > @@ -509,6 +510,7 @@ Haiku) > > usb="linux" > > kvm="yes" > > vhost_net="yes" > > + vfio_pci="yes" > > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then > > audio_possible_drivers="$audio_possible_drivers fmod" > > fi > > @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" > > echo "build guest agent $guest_agent" > > echo "seccomp support $seccomp" > > echo "coroutine backend $coroutine_backend" > > +echo "VFIO PCI support $vfio_pci" > > > > if test "$sdl_too_old" = "yes"; then > > echo "-> Your SDL version is too old - please upgrade to have SDL support" > > @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then > > if test "$smartcard_nss" = "yes" ; then > > echo "subdir-$target: subdir-libcacard" >> $config_host_mak > > fi > > + if test "$vfio_pci" = "yes" ; then > > + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak > > + fi > > case "$target_arch2" in > > i386|x86_64) > > echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak > > diff --git a/hw/Makefile.objs b/hw/Makefile.objs > > index 6dfebd2..7f8d3e4 100644 > > --- a/hw/Makefile.objs > > +++ b/hw/Makefile.objs > > @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o > > obj-$(CONFIG_SOFTMMU) += device-hotplug.o > > obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o > > > > -# Inter-VM PCI shared memory > > +# Inter-VM PCI shared memory & VFIO PCI device assignment > > ifeq ($(CONFIG_PCI), y) > > obj-$(CONFIG_KVM) += ivshmem.o > > +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o > > Why not just make this > > obj-$(CONFIG_LINUX) += vfio_pci.o > > ? > > All you're doing in configure is setting CONFIG_VFIO_PCI if > CONFIG_LINUX. Ok. I thought I needed linux + softmmu + pci, but maybe the softmmu is implied with CONFIG_PCI? Thanks, Alex ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported 2012-09-26 14:15 ` [Qemu-devel] " Alex Williamson @ 2012-09-26 16:41 ` Anthony Liguori -1 siblings, 0 replies; 18+ messages in thread From: Anthony Liguori @ 2012-09-26 16:41 UTC (permalink / raw) To: Alex Williamson; +Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik Alex Williamson <alex.williamson@redhat.com> writes: > On Wed, 2012-09-26 at 08:50 -0500, Anthony Liguori wrote: >> Alex Williamson <alex.williamson@redhat.com> writes: >> >> > Enabled for all softmmu guests supporting PCI on Linux hosts. Note >> > that currently only x86 hosts have the kernel side VFIO IOMMU support >> > for this. PPC (g3beige) is the only non-x86 guest known to work. >> > ARM (veratile) hangs in firmware, others untested. >> > >> > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> >> > Acked-by: Michael S. Tsirkin <mst@redhat.com> >> > --- >> > >> > MAINTAINERS | 5 +++++ >> > configure | 6 ++++++ >> > hw/Makefile.objs | 3 ++- >> > 3 files changed, 13 insertions(+), 1 deletion(-) >> > >> > diff --git a/MAINTAINERS b/MAINTAINERS >> > index 25733fc..29aac4f 100644 >> > --- a/MAINTAINERS >> > +++ b/MAINTAINERS >> > @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> >> > S: Maintained >> > F: hw/usb* >> > >> > +VFIO >> > +M: Alex Williamson <alex.williamson@redhat.com> >> > +S: Supported >> > +F: hw/vfio* >> > + >> > vhost >> > M: Michael S. Tsirkin <mst@redhat.com> >> > S: Supported >> > diff --git a/configure b/configure >> > index 1b86517..c2c0d4f 100755 >> > --- a/configure >> > +++ b/configure >> > @@ -165,6 +165,7 @@ attr="" >> > libattr="" >> > xfs="" >> > >> > +vfio_pci="no" >> > vhost_net="no" >> > kvm="no" >> > gprof="no" >> > @@ -509,6 +510,7 @@ Haiku) >> > usb="linux" >> > kvm="yes" >> > vhost_net="yes" >> > + vfio_pci="yes" >> > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then >> > audio_possible_drivers="$audio_possible_drivers fmod" >> > fi >> > @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" >> > echo "build guest agent $guest_agent" >> > echo "seccomp support $seccomp" >> > echo "coroutine backend $coroutine_backend" >> > +echo "VFIO PCI support $vfio_pci" >> > >> > if test "$sdl_too_old" = "yes"; then >> > echo "-> Your SDL version is too old - please upgrade to have SDL support" >> > @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then >> > if test "$smartcard_nss" = "yes" ; then >> > echo "subdir-$target: subdir-libcacard" >> $config_host_mak >> > fi >> > + if test "$vfio_pci" = "yes" ; then >> > + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak >> > + fi >> > case "$target_arch2" in >> > i386|x86_64) >> > echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak >> > diff --git a/hw/Makefile.objs b/hw/Makefile.objs >> > index 6dfebd2..7f8d3e4 100644 >> > --- a/hw/Makefile.objs >> > +++ b/hw/Makefile.objs >> > @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o >> > obj-$(CONFIG_SOFTMMU) += device-hotplug.o >> > obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o >> > >> > -# Inter-VM PCI shared memory >> > +# Inter-VM PCI shared memory & VFIO PCI device assignment >> > ifeq ($(CONFIG_PCI), y) >> > obj-$(CONFIG_KVM) += ivshmem.o >> > +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o >> >> Why not just make this >> >> obj-$(CONFIG_LINUX) += vfio_pci.o >> >> ? >> >> All you're doing in configure is setting CONFIG_VFIO_PCI if >> CONFIG_LINUX. > > Ok. I thought I needed linux + softmmu + pci, but maybe the softmmu is > implied with CONFIG_PCI? Thanks, obj-y is only used for softmmu so your covered. Regards, Anthony Liguori > > Alex > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Qemu-devel] [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported @ 2012-09-26 16:41 ` Anthony Liguori 0 siblings, 0 replies; 18+ messages in thread From: Anthony Liguori @ 2012-09-26 16:41 UTC (permalink / raw) To: Alex Williamson; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, avi Alex Williamson <alex.williamson@redhat.com> writes: > On Wed, 2012-09-26 at 08:50 -0500, Anthony Liguori wrote: >> Alex Williamson <alex.williamson@redhat.com> writes: >> >> > Enabled for all softmmu guests supporting PCI on Linux hosts. Note >> > that currently only x86 hosts have the kernel side VFIO IOMMU support >> > for this. PPC (g3beige) is the only non-x86 guest known to work. >> > ARM (veratile) hangs in firmware, others untested. >> > >> > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> >> > Acked-by: Michael S. Tsirkin <mst@redhat.com> >> > --- >> > >> > MAINTAINERS | 5 +++++ >> > configure | 6 ++++++ >> > hw/Makefile.objs | 3 ++- >> > 3 files changed, 13 insertions(+), 1 deletion(-) >> > >> > diff --git a/MAINTAINERS b/MAINTAINERS >> > index 25733fc..29aac4f 100644 >> > --- a/MAINTAINERS >> > +++ b/MAINTAINERS >> > @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> >> > S: Maintained >> > F: hw/usb* >> > >> > +VFIO >> > +M: Alex Williamson <alex.williamson@redhat.com> >> > +S: Supported >> > +F: hw/vfio* >> > + >> > vhost >> > M: Michael S. Tsirkin <mst@redhat.com> >> > S: Supported >> > diff --git a/configure b/configure >> > index 1b86517..c2c0d4f 100755 >> > --- a/configure >> > +++ b/configure >> > @@ -165,6 +165,7 @@ attr="" >> > libattr="" >> > xfs="" >> > >> > +vfio_pci="no" >> > vhost_net="no" >> > kvm="no" >> > gprof="no" >> > @@ -509,6 +510,7 @@ Haiku) >> > usb="linux" >> > kvm="yes" >> > vhost_net="yes" >> > + vfio_pci="yes" >> > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then >> > audio_possible_drivers="$audio_possible_drivers fmod" >> > fi >> > @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" >> > echo "build guest agent $guest_agent" >> > echo "seccomp support $seccomp" >> > echo "coroutine backend $coroutine_backend" >> > +echo "VFIO PCI support $vfio_pci" >> > >> > if test "$sdl_too_old" = "yes"; then >> > echo "-> Your SDL version is too old - please upgrade to have SDL support" >> > @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then >> > if test "$smartcard_nss" = "yes" ; then >> > echo "subdir-$target: subdir-libcacard" >> $config_host_mak >> > fi >> > + if test "$vfio_pci" = "yes" ; then >> > + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak >> > + fi >> > case "$target_arch2" in >> > i386|x86_64) >> > echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak >> > diff --git a/hw/Makefile.objs b/hw/Makefile.objs >> > index 6dfebd2..7f8d3e4 100644 >> > --- a/hw/Makefile.objs >> > +++ b/hw/Makefile.objs >> > @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o >> > obj-$(CONFIG_SOFTMMU) += device-hotplug.o >> > obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o >> > >> > -# Inter-VM PCI shared memory >> > +# Inter-VM PCI shared memory & VFIO PCI device assignment >> > ifeq ($(CONFIG_PCI), y) >> > obj-$(CONFIG_KVM) += ivshmem.o >> > +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o >> >> Why not just make this >> >> obj-$(CONFIG_LINUX) += vfio_pci.o >> >> ? >> >> All you're doing in configure is setting CONFIG_VFIO_PCI if >> CONFIG_LINUX. > > Ok. I thought I needed linux + softmmu + pci, but maybe the softmmu is > implied with CONFIG_PCI? Thanks, obj-y is only used for softmmu so your covered. Regards, Anthony Liguori > > Alex > > -- > To unsubscribe from this list: send the line "unsubscribe kvm" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported 2012-09-26 16:41 ` [Qemu-devel] " Anthony Liguori @ 2012-09-26 16:52 ` Alex Williamson -1 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 16:52 UTC (permalink / raw) To: Anthony Liguori; +Cc: qemu-devel, kvm, jan.kiszka, avi, blauwirbel, aik On Wed, 2012-09-26 at 11:41 -0500, Anthony Liguori wrote: > Alex Williamson <alex.williamson@redhat.com> writes: > > > On Wed, 2012-09-26 at 08:50 -0500, Anthony Liguori wrote: > >> Alex Williamson <alex.williamson@redhat.com> writes: > >> > >> > Enabled for all softmmu guests supporting PCI on Linux hosts. Note > >> > that currently only x86 hosts have the kernel side VFIO IOMMU support > >> > for this. PPC (g3beige) is the only non-x86 guest known to work. > >> > ARM (veratile) hangs in firmware, others untested. > >> > > >> > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> > >> > Acked-by: Michael S. Tsirkin <mst@redhat.com> > >> > --- > >> > > >> > MAINTAINERS | 5 +++++ > >> > configure | 6 ++++++ > >> > hw/Makefile.objs | 3 ++- > >> > 3 files changed, 13 insertions(+), 1 deletion(-) > >> > > >> > diff --git a/MAINTAINERS b/MAINTAINERS > >> > index 25733fc..29aac4f 100644 > >> > --- a/MAINTAINERS > >> > +++ b/MAINTAINERS > >> > @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> > >> > S: Maintained > >> > F: hw/usb* > >> > > >> > +VFIO > >> > +M: Alex Williamson <alex.williamson@redhat.com> > >> > +S: Supported > >> > +F: hw/vfio* > >> > + > >> > vhost > >> > M: Michael S. Tsirkin <mst@redhat.com> > >> > S: Supported > >> > diff --git a/configure b/configure > >> > index 1b86517..c2c0d4f 100755 > >> > --- a/configure > >> > +++ b/configure > >> > @@ -165,6 +165,7 @@ attr="" > >> > libattr="" > >> > xfs="" > >> > > >> > +vfio_pci="no" > >> > vhost_net="no" > >> > kvm="no" > >> > gprof="no" > >> > @@ -509,6 +510,7 @@ Haiku) > >> > usb="linux" > >> > kvm="yes" > >> > vhost_net="yes" > >> > + vfio_pci="yes" > >> > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then > >> > audio_possible_drivers="$audio_possible_drivers fmod" > >> > fi > >> > @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" > >> > echo "build guest agent $guest_agent" > >> > echo "seccomp support $seccomp" > >> > echo "coroutine backend $coroutine_backend" > >> > +echo "VFIO PCI support $vfio_pci" > >> > > >> > if test "$sdl_too_old" = "yes"; then > >> > echo "-> Your SDL version is too old - please upgrade to have SDL support" > >> > @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then > >> > if test "$smartcard_nss" = "yes" ; then > >> > echo "subdir-$target: subdir-libcacard" >> $config_host_mak > >> > fi > >> > + if test "$vfio_pci" = "yes" ; then > >> > + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak > >> > + fi > >> > case "$target_arch2" in > >> > i386|x86_64) > >> > echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak > >> > diff --git a/hw/Makefile.objs b/hw/Makefile.objs > >> > index 6dfebd2..7f8d3e4 100644 > >> > --- a/hw/Makefile.objs > >> > +++ b/hw/Makefile.objs > >> > @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o > >> > obj-$(CONFIG_SOFTMMU) += device-hotplug.o > >> > obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o > >> > > >> > -# Inter-VM PCI shared memory > >> > +# Inter-VM PCI shared memory & VFIO PCI device assignment > >> > ifeq ($(CONFIG_PCI), y) > >> > obj-$(CONFIG_KVM) += ivshmem.o > >> > +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o > >> > >> Why not just make this > >> > >> obj-$(CONFIG_LINUX) += vfio_pci.o > >> > >> ? > >> > >> All you're doing in configure is setting CONFIG_VFIO_PCI if > >> CONFIG_LINUX. > > > > Ok. I thought I needed linux + softmmu + pci, but maybe the softmmu is > > implied with CONFIG_PCI? Thanks, > > obj-y is only used for softmmu so your covered. Great, I'll make the change. Thanks, Alex ^ permalink raw reply [flat|nested] 18+ messages in thread
* Re: [Qemu-devel] [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported @ 2012-09-26 16:52 ` Alex Williamson 0 siblings, 0 replies; 18+ messages in thread From: Alex Williamson @ 2012-09-26 16:52 UTC (permalink / raw) To: Anthony Liguori; +Cc: kvm, aik, jan.kiszka, qemu-devel, blauwirbel, avi On Wed, 2012-09-26 at 11:41 -0500, Anthony Liguori wrote: > Alex Williamson <alex.williamson@redhat.com> writes: > > > On Wed, 2012-09-26 at 08:50 -0500, Anthony Liguori wrote: > >> Alex Williamson <alex.williamson@redhat.com> writes: > >> > >> > Enabled for all softmmu guests supporting PCI on Linux hosts. Note > >> > that currently only x86 hosts have the kernel side VFIO IOMMU support > >> > for this. PPC (g3beige) is the only non-x86 guest known to work. > >> > ARM (veratile) hangs in firmware, others untested. > >> > > >> > Signed-off-by: Alex Williamson <alex.williamson@redhat.com> > >> > Acked-by: Michael S. Tsirkin <mst@redhat.com> > >> > --- > >> > > >> > MAINTAINERS | 5 +++++ > >> > configure | 6 ++++++ > >> > hw/Makefile.objs | 3 ++- > >> > 3 files changed, 13 insertions(+), 1 deletion(-) > >> > > >> > diff --git a/MAINTAINERS b/MAINTAINERS > >> > index 25733fc..29aac4f 100644 > >> > --- a/MAINTAINERS > >> > +++ b/MAINTAINERS > >> > @@ -474,6 +474,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> > >> > S: Maintained > >> > F: hw/usb* > >> > > >> > +VFIO > >> > +M: Alex Williamson <alex.williamson@redhat.com> > >> > +S: Supported > >> > +F: hw/vfio* > >> > + > >> > vhost > >> > M: Michael S. Tsirkin <mst@redhat.com> > >> > S: Supported > >> > diff --git a/configure b/configure > >> > index 1b86517..c2c0d4f 100755 > >> > --- a/configure > >> > +++ b/configure > >> > @@ -165,6 +165,7 @@ attr="" > >> > libattr="" > >> > xfs="" > >> > > >> > +vfio_pci="no" > >> > vhost_net="no" > >> > kvm="no" > >> > gprof="no" > >> > @@ -509,6 +510,7 @@ Haiku) > >> > usb="linux" > >> > kvm="yes" > >> > vhost_net="yes" > >> > + vfio_pci="yes" > >> > if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then > >> > audio_possible_drivers="$audio_possible_drivers fmod" > >> > fi > >> > @@ -3174,6 +3176,7 @@ echo "libiscsi support $libiscsi" > >> > echo "build guest agent $guest_agent" > >> > echo "seccomp support $seccomp" > >> > echo "coroutine backend $coroutine_backend" > >> > +echo "VFIO PCI support $vfio_pci" > >> > > >> > if test "$sdl_too_old" = "yes"; then > >> > echo "-> Your SDL version is too old - please upgrade to have SDL support" > >> > @@ -3911,6 +3914,9 @@ if test "$target_softmmu" = "yes" ; then > >> > if test "$smartcard_nss" = "yes" ; then > >> > echo "subdir-$target: subdir-libcacard" >> $config_host_mak > >> > fi > >> > + if test "$vfio_pci" = "yes" ; then > >> > + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak > >> > + fi > >> > case "$target_arch2" in > >> > i386|x86_64) > >> > echo "CONFIG_HAVE_CORE_DUMP=y" >> $config_target_mak > >> > diff --git a/hw/Makefile.objs b/hw/Makefile.objs > >> > index 6dfebd2..7f8d3e4 100644 > >> > --- a/hw/Makefile.objs > >> > +++ b/hw/Makefile.objs > >> > @@ -198,7 +198,8 @@ obj-$(CONFIG_VGA) += vga.o > >> > obj-$(CONFIG_SOFTMMU) += device-hotplug.o > >> > obj-$(CONFIG_XEN) += xen_domainbuild.o xen_machine_pv.o > >> > > >> > -# Inter-VM PCI shared memory > >> > +# Inter-VM PCI shared memory & VFIO PCI device assignment > >> > ifeq ($(CONFIG_PCI), y) > >> > obj-$(CONFIG_KVM) += ivshmem.o > >> > +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o > >> > >> Why not just make this > >> > >> obj-$(CONFIG_LINUX) += vfio_pci.o > >> > >> ? > >> > >> All you're doing in configure is setting CONFIG_VFIO_PCI if > >> CONFIG_LINUX. > > > > Ok. I thought I needed linux + softmmu + pci, but maybe the softmmu is > > implied with CONFIG_PCI? Thanks, > > obj-y is only used for softmmu so your covered. Great, I'll make the change. Thanks, Alex ^ permalink raw reply [flat|nested] 18+ messages in thread
end of thread, other threads:[~2012-09-26 16:52 UTC | newest] Thread overview: 18+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-09-26 3:38 [RESEND PATCH v5 0/4] VFIO-based PCI device assignment Alex Williamson 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson 2012-09-26 3:38 ` [RESEND PATCH v5 1/4] Update kernel header script to include vfio Alex Williamson 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson 2012-09-26 3:38 ` [RESEND PATCH v5 2/4] Update Linux kernel headers Alex Williamson 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson 2012-09-26 3:38 ` [RESEND PATCH v5 3/4] vfio: vfio-pci device assignment driver Alex Williamson 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson 2012-09-26 3:38 ` [RESEND PATCH v5 4/4] vfio: Enable vfio-pci and mark supported Alex Williamson 2012-09-26 3:38 ` [Qemu-devel] " Alex Williamson 2012-09-26 13:50 ` Anthony Liguori 2012-09-26 13:50 ` [Qemu-devel] " Anthony Liguori 2012-09-26 14:15 ` Alex Williamson 2012-09-26 14:15 ` [Qemu-devel] " Alex Williamson 2012-09-26 16:41 ` Anthony Liguori 2012-09-26 16:41 ` [Qemu-devel] " Anthony Liguori 2012-09-26 16:52 ` Alex Williamson 2012-09-26 16:52 ` [Qemu-devel] " Alex Williamson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.