From: Peter Korsgaard <jacmet@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] uclibc / glibc rfs issues
Date: Fri, 23 Apr 2010 14:20:42 +0200 [thread overview]
Message-ID: <87bpda5pid.fsf@macbook.be.48ers.dk> (raw)
In-Reply-To: <k2k630286c71004230507hf51966b6qd1d488ee90570fdb@mail.gmail.com> (Nataraj S. Narayan's message of "Fri, 23 Apr 2010 12:07:02 +0000")
>>>>> "Nataraj" == Nataraj S Narayan <natarajsn@gmail.com> writes:
Nataraj> Hi Jacmet
Nataraj> My .config:-
Thanks, don't forget to send it to the mailing list, and not just
straight to me.
Nataraj> BR2_HAVE_DOT_CONFIG=y
Nataraj> BR2_VERSION="2010.05-git"
Nataraj> BR2_arm=y
Nataraj> BR2_arm926t=y
Nataraj> BR2_ARM_TYPE="ARM926T"
Nataraj> BR2_ARM_EABI=y
Nataraj> BR2_ARCH="arm"
Nataraj> BR2_ENDIAN="LITTLE"
Nataraj> BR2_GCC_TARGET_TUNE="arm9tdmi"
Nataraj> BR2_GCC_TARGET_ARCH="armv5te"
Nataraj> BR2_GCC_TARGET_ABI="aapcs-linux"
Nataraj> BR2_TARGET_GENERIC_HOSTNAME="buildroot"
Nataraj> BR2_TARGET_GENERIC_ISSUE="Welcome to MMFSL ucLibc"
Nataraj> BR2_WGET="wget --passive-ftp -nd"
Nataraj> BR2_SVN_CO="svn co"
Nataraj> BR2_SVN_UP="svn up"
Nataraj> BR2_BZR_CO="bzr co"
Nataraj> BR2_BZR_UP="bzr up"
Nataraj> BR2_GIT="git clone"
Nataraj> BR2_ZCAT="gzip -d -c"
Nataraj> BR2_BZCAT="bzcat"
Nataraj> BR2_TAR_OPTIONS=""
Nataraj> BR2_DL_DIR="/home/nataraj/buildroot/dl"
Nataraj> BR2_COPYTO=""
Nataraj> BR2_STAGING_DIR="$(BASE_DIR)/staging"
Nataraj> BR2_PRIMARY_SITE=""
Nataraj> BR2_BACKUP_SITE="http://buildroot.net/downloads/sources/"
Nataraj> BR2_SOURCEFORGE_MIRROR="easynews"
Nataraj> BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
Nataraj> BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
Nataraj> BR2_DEBIAN_MIRROR="http://ftp.debian.org"
Nataraj> BR2_GNU_TARGET_SUFFIX="linux-uclibcgnueabi"
Nataraj> BR2_JLEVEL=2
Nataraj> BR2_STRIP_strip=y
Nataraj> BR2_OPTIMIZE_S=y
Nataraj> BR2_CONFIG_CACHE=y
Nataraj> BR2_TOOLCHAIN_BUILDROOT=y
Nataraj> BR2_KERNEL_HEADERS_2_6_32=y
Nataraj> BR2_DEFAULT_KERNEL_HEADERS="2.6.32.11"
Nataraj> BR2_UCLIBC_VERSION_0_9_31=y
Nataraj> BR2_UCLIBC_VERSION_STRING="0.9.31"
Nataraj> BR2_UCLIBC_CONFIG="toolchain/uClibc/uClibc-0.9.31.config"
Nataraj> BR2_BINUTILS_VERSION_2_20=y
Nataraj> BR2_BINUTILS_VERSION="2.20"
Nataraj> BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""
Nataraj> BR2_GCC_VERSION_4_3_4=y
Nataraj> BR2_GCC_SUPPORTS_SYSROOT=y
Nataraj> BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
Nataraj> BR2_GCC_VERSION="4.3.4"
Nataraj> BR2_TOOLCHAIN_SYSROOT=y
Nataraj> BR2_EXTRA_GCC_CONFIG_OPTIONS=""
Nataraj> BR2_GCC_SHARED_LIBGCC=y
Nataraj> BR2_GCC_ENABLE_TLS=y
Nataraj> BR2_ENABLE_LOCALE=y
Nataraj> BR2_ENABLE_LOCALE_PURGE=y
Nataraj> BR2_ENABLE_LOCALE_WHITELIST="C en_US"
Nataraj> BR2_USE_WCHAR=y
Nataraj> BR2_PREFER_SOFT_FLOAT=y
Nataraj> BR2_SOFT_FLOAT=y
Nataraj> BR2_PTHREADS_OLD=y
Nataraj> BR2_TARGET_OPTIMIZATION="-Os -pipe"
Nataraj> BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
Nataraj> BR2_PACKAGE_BUSYBOX=y
Nataraj> BR2_BUSYBOX_VERSION_1_16_X=y
Nataraj> BR2_BUSYBOX_VERSION="1.16.1"
Nataraj> BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
Nataraj> BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.16.x.config"
Nataraj> BR2_PACKAGE_BUSYBOX_SKELETON=y
The busybox skeleton is afaik not used much, so that might cause you
trouble. That said, it does have a /proc entry and no reference to
configfs - Have you changed anything yourself?
--
Bye, Peter Korsgaard
next prev parent reply other threads:[~2010-04-23 12:20 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-23 11:01 [Buildroot] uclibc / glibc rfs issues Nataraj S Narayan
2010-04-23 11:20 ` Nataraj S Narayan
2010-04-23 11:27 ` Peter Korsgaard
2010-04-23 11:25 ` Peter Korsgaard
[not found] ` <w2k630286c71004230440w822541bdqc0bbd128fb4a2e5e@mail.gmail.com>
2010-04-23 11:46 ` Peter Korsgaard
[not found] ` <k2k630286c71004230507hf51966b6qd1d488ee90570fdb@mail.gmail.com>
2010-04-23 12:20 ` Peter Korsgaard [this message]
2010-04-23 12:25 ` Nataraj S Narayan
2010-04-24 7:30 ` Nataraj S Narayan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87bpda5pid.fsf@macbook.be.48ers.dk \
--to=jacmet@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.