All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: Michael Walle <mwalle@kernel.org>, Tom Rini <trini@konsulko.com>,
	Jerome Forissier <jerome.forissier@linaro.org>
Cc: u-boot@lists.denx.de, Michael Walle <mwalle@kernel.org>
Subject: Re: [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB
Date: Thu, 20 Mar 2025 10:25:31 +0100	[thread overview]
Message-ID: <87cyecdpf8.fsf@baylibre.com> (raw)
In-Reply-To: <20250312073655.2281377-1-mwalle@kernel.org>

Hi Michael,

Thank you for the patch.

On mer., mars 12, 2025 at 08:36, Michael Walle <mwalle@kernel.org> wrote:

> Fastboot works either over TCP, UDP or USB. The latter doesn't have
> anything to do with networking, thus should work just fine with
> regardless which network stack is selected. In practice, header symbols
> are used inside common code paths. Add some ifdeffery to guard against
> that.
>
> This will make fastboot over USB work with the new LWIP stack.
>
> Signed-off-by: Michael Walle <mwalle@kernel.org>

checkpatch.pl reports some issues with this:

$ ./scripts/checkpatch.pl --strict --u-boot --git HEAD^..HEAD

<snip>
WARNING: Use 'if (IS_ENABLED(CONFIG...))' instead of '#if or #ifdef' where possible
<snip>

Some occurences below could be fixed. Could you please have a look?

> ---
> Alternatively, we could add the defines and stub functions to the lwip
> header.
> ---
>  cmd/fastboot.c               | 4 ++++
>  drivers/fastboot/Kconfig     | 1 -
>  drivers/fastboot/fb_common.c | 4 ++++
>  3 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/cmd/fastboot.c b/cmd/fastboot.c
> index d4cfc0c7a28..be84a482b81 100644
> --- a/cmd/fastboot.c
> +++ b/cmd/fastboot.c
> @@ -16,6 +16,7 @@
>  #include <linux/printk.h>
>  #include <linux/stringify.h>
>  
> +#if CONFIG_IS_ENABLED(NET)

I think this can be dropped. I hope that since it's a static function,
-if there are no users in the file- the compiler will optimize it out.
Note: I have not verified this, so I might be wrong.

If you measure and see size changes between keeping the #if and not
keeping it, please ignore this comment.

>  static int do_fastboot_udp(int argc, char *const argv[],
>  			   uintptr_t buf_addr, size_t buf_size)
>  {
> @@ -55,6 +56,7 @@ static int do_fastboot_tcp(int argc, char *const argv[],
>  
>  	return CMD_RET_SUCCESS;
>  }
> +#endif
>  
>  static int do_fastboot_usb(int argc, char *const argv[],
>  			   uintptr_t buf_addr, size_t buf_size)
> @@ -160,10 +162,12 @@ NXTARG:
>  
>  	fastboot_init((void *)buf_addr, buf_size);
>  
> +#if CONFIG_IS_ENABLED(NET)
>  	if (!strcmp(argv[1], "udp"))
>  		return do_fastboot_udp(argc, argv, buf_addr, buf_size);
>  	if (!strcmp(argv[1], "tcp"))
>  		return do_fastboot_tcp(argc, argv, buf_addr, buf_size);
> +#endif

This can be replaced with:

	if (IS_ENABLED(CONFIG_NET)) {
		if (!strcmp(argv[1], "udp"))
			return do_fastboot_udp(argc, argv, buf_addr, buf_size);
		if (!strcmp(argv[1], "tcp"))
			return do_fastboot_tcp(argc, argv, buf_addr, buf_size);
	}

>  	if (!strcmp(argv[1], "usb")) {
>  		argv++;
>  		argc--;
> diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
> index 1eb460f5a02..70207573de2 100644
> --- a/drivers/fastboot/Kconfig
> +++ b/drivers/fastboot/Kconfig
> @@ -1,6 +1,5 @@
>  menu "Fastboot support"
>  	depends on CMDLINE
> -	depends on !NET_LWIP
>  
>  config FASTBOOT
>  	bool
> diff --git a/drivers/fastboot/fb_common.c b/drivers/fastboot/fb_common.c
> index 12ffb463deb..68f92c4b887 100644
> --- a/drivers/fastboot/fb_common.c
> +++ b/drivers/fastboot/fb_common.c
> @@ -183,11 +183,15 @@ void fastboot_handle_boot(int command, bool success)
>  	switch (command) {
>  	case FASTBOOT_COMMAND_BOOT:
>  		fastboot_boot();
> +#if CONFIG_IS_ENABLED(NET)
>  		net_set_state(NETLOOP_SUCCESS);
> +#endif

This can be replaced with:

		if (IS_ENABLED((CONFIG_NET))
		    net_set_state(NETLOOP_SUCCESS);

>  		break;
>  
>  	case FASTBOOT_COMMAND_CONTINUE:
> +#if CONFIG_IS_ENABLED(NET)
>  		net_set_state(NETLOOP_SUCCESS);
> +#endif

Same here.

>  		break;
>  
>  	case FASTBOOT_COMMAND_REBOOT:
> -- 
> 2.39.5

  parent reply	other threads:[~2025-03-20  9:25 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-12  7:36 [PATCH 1/3] fastboot: lift restrictions on !NET_LWIP for USB Michael Walle
2025-03-12  7:41 ` Michael Walle
2025-03-12  8:25 ` Jerome Forissier
2025-03-20  9:25 ` Mattijs Korpershoek [this message]
2025-03-28  9:06   ` Michael Walle
2025-03-28 15:59     ` Tom Rini
2025-03-28 17:07       ` Mattijs Korpershoek
2025-04-10  8:46 ` Mattijs Korpershoek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87cyecdpf8.fsf@baylibre.com \
    --to=mkorpershoek@baylibre.com \
    --cc=jerome.forissier@linaro.org \
    --cc=mwalle@kernel.org \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.