From: Mattijs Korpershoek <mkorpershoek@baylibre.com>
To: Roger Quadros <rogerq@kernel.org>,
Siddharth Vadapalli <s-vadapalli@ti.com>,
trini@konsulko.com, marex@denx.de, bmeng.cn@gmail.com,
jonas@kwiboo.se
Cc: u-boot@lists.denx.de, srk@ti.com
Subject: Re: [PATCH] usb: xhci-dwc3: Bail out if "dr_mode" is "peripheral"
Date: Thu, 16 Jan 2025 10:36:45 +0100 [thread overview]
Message-ID: <87cygn85hu.fsf@baylibre.com> (raw)
In-Reply-To: <ceb060fa-d430-458d-b711-508a4bd34d48@kernel.org>
Hi Siddharth,
On lun., déc. 09, 2024 at 15:20, Roger Quadros <rogerq@kernel.org> wrote:
> Hi Siddharth,
>
> On 06/12/2024 13:04, Siddharth Vadapalli wrote:
>> Since the compatible "snps,dwc3" can be specified in the device-tree for
>> the Designware USB Controller configured for not only Host and OTG modes
>> of operation, but also for Peripheral mode of operation, bail out if
>> "dr_mode" is "peripheral".
>>
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
>> ---
>>
>> Hello,
>>
>> This patch is based on commit
>> 448add55297 Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-pmic
>> of the master branch of U-Boot.
>>
>> Regards,
>> Siddharth.
>>
>> drivers/usb/host/xhci-dwc3.c | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
>> index e3e0ceff43e..7b1311503fe 100644
>> --- a/drivers/usb/host/xhci-dwc3.c
>> +++ b/drivers/usb/host/xhci-dwc3.c
>> @@ -208,6 +208,9 @@ static int xhci_dwc3_probe(struct udevice *dev)
>> writel(reg, &dwc3_reg->g_usb2phycfg[0]);
>>
>> dr_mode = usb_get_dr_mode(dev_ofnode(dev));
>> + if (dr_mode == USB_DR_MODE_PERIPHERAL)
>> + return -ENODEV;
>> +
>> if (dr_mode == USB_DR_MODE_OTG &&
>> dev_read_bool(dev, "usb-role-switch")) {
>> dr_mode = usb_get_role_switch_default_mode(dev_ofnode(dev));
>
> Although this proposal was suggested in [1] and later clarified in
> [2] I will summarize the discussion here.
>
> This patch fix is not sufficient for all cases as the xhci-dwc3.c
> driver will still be probed if dr_mode is OTG or HOST along with
> other platform drivers if enabled in config.
>
> The only current solution is not not enable CONFIG_USB_XHCI_DWC3
> together with another platform driver config (e.g. CONFIG_USB_DWC3_GENERIC)
> if snps,dwc3 should not be managed by xhci-dwc3.c.
Given Roger's explanation, should we simply drop this, or is any other
action expected from the U-Boot maintainers?
Thanks,
Mattijs
>
> [1] - https://lore.kernel.org/all/unf757pwgah5ylkcfdumtdo5zs2ny3nxct5u26t6up7aldqim2@mxhhtb53gw4x/
> [2] - https://lore.kernel.org/all/a9c458f8-68e5-448b-9977-e7bf37b00d35@kernel.org/
>
> --
> cheers,
> -roger
next prev parent reply other threads:[~2025-01-16 9:36 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-06 11:04 [PATCH] usb: xhci-dwc3: Bail out if "dr_mode" is "peripheral" Siddharth Vadapalli
2024-12-09 13:20 ` Roger Quadros
2025-01-16 9:36 ` Mattijs Korpershoek [this message]
2025-01-16 10:18 ` Siddharth Vadapalli
2025-01-16 10:28 ` Mattijs Korpershoek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87cygn85hu.fsf@baylibre.com \
--to=mkorpershoek@baylibre.com \
--cc=bmeng.cn@gmail.com \
--cc=jonas@kwiboo.se \
--cc=marex@denx.de \
--cc=rogerq@kernel.org \
--cc=s-vadapalli@ti.com \
--cc=srk@ti.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.