All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jani Nikula <jani.nikula@linux.intel.com>
To: Ville Syrjala <ville.syrjala@linux.intel.com>,
	intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 3/6] drm/i915: Extract pipe_mbus_dbox_ctl_update()
Date: Fri, 01 Nov 2024 12:29:03 +0200	[thread overview]
Message-ID: <87cyjfjlhs.fsf@intel.com> (raw)
In-Reply-To: <20241031155646.15165-4-ville.syrjala@linux.intel.com>

On Thu, 31 Oct 2024, Ville Syrjala <ville.syrjala@linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> We'll be wanting reprogram the PIPE_MBUS_DBOX_CTL registers

wanting *to* reprogram

I would've wanted to see conversion to struct intel_display here too, or
at least a mention we're keeping it this way for backports, or
something. A patch on top changing everything in one go is fine too.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>

> during an upcoming MBUS sanitation stage. Extract the reprogramming
> loop into a helper that doesn't depend on the full atomic state
> so that it can be reused.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/skl_watermark.c | 15 +++++++++++----
>  1 file changed, 11 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
> index 7a7caaf7e87d..8a31508f94bb 100644
> --- a/drivers/gpu/drm/i915/display/skl_watermark.c
> +++ b/drivers/gpu/drm/i915/display/skl_watermark.c
> @@ -3319,11 +3319,20 @@ static u32 pipe_mbus_dbox_ctl(const struct intel_crtc *crtc,
>  	return val;
>  }
>  
> +static void pipe_mbus_dbox_ctl_update(struct drm_i915_private *i915,
> +				      const struct intel_dbuf_state *dbuf_state)
> +{
> +	struct intel_crtc *crtc;
> +
> +	for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, dbuf_state->active_pipes)
> +		intel_de_write(i915, PIPE_MBUS_DBOX_CTL(crtc->pipe),
> +			       pipe_mbus_dbox_ctl(crtc, dbuf_state));
> +}
> +
>  static void intel_mbus_dbox_update(struct intel_atomic_state *state)
>  {
>  	struct drm_i915_private *i915 = to_i915(state->base.dev);
>  	const struct intel_dbuf_state *new_dbuf_state, *old_dbuf_state;
> -	const struct intel_crtc *crtc;
>  
>  	if (DISPLAY_VER(i915) < 11)
>  		return;
> @@ -3335,9 +3344,7 @@ static void intel_mbus_dbox_update(struct intel_atomic_state *state)
>  	     new_dbuf_state->active_pipes == old_dbuf_state->active_pipes))
>  		return;
>  
> -	for_each_intel_crtc_in_pipe_mask(&i915->drm, crtc, new_dbuf_state->active_pipes)
> -		intel_de_write(i915, PIPE_MBUS_DBOX_CTL(crtc->pipe),
> -			       pipe_mbus_dbox_ctl(crtc, new_dbuf_state));
> +	pipe_mbus_dbox_ctl_update(i915, new_dbuf_state);
>  }
>  
>  int intel_dbuf_state_set_mdclk_cdclk_ratio(struct intel_atomic_state *state,

-- 
Jani Nikula, Intel

  reply	other threads:[~2024-11-01 10:29 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-10-31 15:56 [PATCH 0/6] drm/i915: Sanitize MBUS joining Ville Syrjala
2024-10-31 15:56 ` [PATCH 1/6] drm/i915: Relocate the SKL wm sanitation code Ville Syrjala
2024-11-01 10:26   ` Jani Nikula
2024-10-31 15:56 ` [PATCH 2/6] drm/i915: Extract pipe_mbus_dbox_ctl() Ville Syrjala
2024-11-01 10:27   ` Jani Nikula
2024-10-31 15:56 ` [PATCH 3/6] drm/i915: Extract pipe_mbus_dbox_ctl_update() Ville Syrjala
2024-11-01 10:29   ` Jani Nikula [this message]
2024-11-01 13:46     ` Ville Syrjälä
2024-10-31 15:56 ` [PATCH 4/6] drm/i915: Extract mbus_ctl_join_update() Ville Syrjala
2024-11-01 10:30   ` Jani Nikula
2024-10-31 15:56 ` [PATCH 5/6] drm/i915: Sanitize MBUS joining Ville Syrjala
2024-11-01 10:39   ` Jani Nikula
2024-10-31 15:56 ` [PATCH 6/6] drm/i915: Simplify xelpdp_is_only_pipe_per_dbuf_bank() Ville Syrjala
2024-11-01 10:32   ` Jani Nikula
2024-11-04  7:33 ` ✓ Fi.CI.BAT: success for drm/i915: Sanitize MBUS joining Patchwork
2024-11-04  8:54 ` ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87cyjfjlhs.fsf@intel.com \
    --to=jani.nikula@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.