From: Scott D Phillips <scott.d.phillips@intel.com>
To: Jordan Justen <jordan.l.justen@intel.com>,
IGT GPU Tools <igt-dev@lists.freedesktop.org>
Subject: Re: [igt-dev] [PATCH i-g-t 1/6] aubdump: Add gen8_map_range
Date: Wed, 21 Feb 2018 16:43:41 -0800 [thread overview]
Message-ID: <87d10x3lc2.fsf@intel.com> (raw)
In-Reply-To: <20180221231905.15580-1-jordan.l.justen@intel.com>
Jordan Justen <jordan.l.justen@intel.com> writes:
> This function should allow us to only write the page table entries
> that get used.
>
> Cc: Scott D Phillips <scott.d.phillips@intel.com>
> Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
> ---
> tools/aubdump.c | 41 ++++++++++++++++++++++++++++++-----------
> 1 file changed, 30 insertions(+), 11 deletions(-)
>
> diff --git a/tools/aubdump.c b/tools/aubdump.c
> index 700296f4..2e60e547 100644
> --- a/tools/aubdump.c
> +++ b/tools/aubdump.c
> @@ -382,12 +382,40 @@ register_write_out(uint32_t addr, uint32_t value)
> dword_out(value);
> }
>
> +static void
> +gen8_map_range(uint64_t start, uint64_t end)
> +{
> + uint64_t entry_addr;
> + uint64_t page_num;
> + uint64_t end_aligned = (end + 4096 - 1) & ~(4096 - 1);
end_aligned = ALIGN(end, 4096);
> +
> + if (start >= end)
> + return;
Also check (end <= 1ull << 32) (ggtt is at most 4gb)
> + entry_addr = start & ~(4096 - 1);
> + do {
> + page_num = entry_addr >> 21;
> + uint64_t last_page_entry =
> + min((page_num + 1) << 21, end_aligned);
> + uint64_t num_entries = (last_page_entry - entry_addr) >> 12;
> + mem_trace_memory_write_header_out(
> + (page_num << 12) + ((entry_addr >> 9) & 0xff8),
This is a little obfuscated and comes out to equal (entry_addr >> 9) if
I follow.
> + num_entries * GEN8_PTE_SIZE,
> + AUB_MEM_TRACE_MEMORY_ADDRESS_SPACE_GGTT_ENTRY);
> + while (num_entries-- > 0) {
> + dword_out((entry_addr & ~(4096 - 1)) |
> + 3 /* read/write | present */);
> + dword_out(entry_addr >> 32);
> + entry_addr += 4096;
> + }
> + } while (entry_addr < end);
> +}
> +
> static void
> gen10_write_header(void)
> {
> char app_name[8 * 4];
> int app_name_len, dwords;
> - uint32_t entry = 0x3; /* read/write | present */
>
> app_name_len =
> snprintf(app_name, sizeof(app_name), "PCI-ID=0x%X %s", device,
> @@ -403,16 +431,7 @@ gen10_write_header(void)
> dword_out(0); /* version */
> data_out(app_name, app_name_len);
>
> - /* GGTT PT */
> - for (uint32_t page = 0; page < ALIGN(PT_SIZE, 4096) / 4096; page++) {
> - uint32_t to_write = min(PT_SIZE - page * 4096, 4096);
Might as well delete PT_SIZE as it's not used now.
> - mem_trace_memory_write_header_out(page << 12, to_write,
> - AUB_MEM_TRACE_MEMORY_ADDRESS_SPACE_GGTT_ENTRY);
> - for (uint32_t i = 0; i < to_write / GEN8_PTE_SIZE; i++) {
> - dword_out(entry + 0x1000 * i + 0x200000 * page);
> - dword_out(0);
> - }
> - }
> + gen8_map_range(0, MEMORY_MAP_SIZE);
>
> /* RENDER_RING */
> mem_trace_memory_write_header_out(RENDER_RING_ADDR, RING_SIZE,
> --
> 2.16.1
_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev
next prev parent reply other threads:[~2018-02-22 0:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-21 23:19 [igt-dev] [PATCH i-g-t 1/6] aubdump: Add gen8_map_range Jordan Justen
2018-02-21 23:19 ` [igt-dev] [PATCH i-g-t 2/6] aubdump: Add bitmap to track gtt pages that have been mapped Jordan Justen
2018-02-22 0:52 ` Scott D Phillips
2018-02-21 23:19 ` [igt-dev] [PATCH i-g-t 3/6] aubdump: For gen10+ support addresses up to 4GB Jordan Justen
2018-02-22 0:58 ` Scott D Phillips
2018-02-22 1:49 ` Jordan Justen
2018-02-21 23:19 ` [igt-dev] [PATCH i-g-t 4/6] aubdump: Support alignment of BO in execbuffer2 Jordan Justen
2018-02-21 23:19 ` [igt-dev] [PATCH i-g-t 5/6] aubdump: Note pinned BO in verbose output Jordan Justen
2018-02-21 23:19 ` [igt-dev] [PATCH i-g-t 6/6] aubdump: Signal drm sync objects when device override is used Jordan Justen
2018-02-22 1:03 ` Scott D Phillips
2018-02-22 1:06 ` Jason Ekstrand
2018-02-22 0:34 ` [igt-dev] ✓ Fi.CI.BAT: success for series starting with [i-g-t,1/6] aubdump: Add gen8_map_range Patchwork
2018-02-22 0:43 ` Scott D Phillips [this message]
2018-02-22 5:24 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87d10x3lc2.fsf@intel.com \
--to=scott.d.phillips@intel.com \
--cc=igt-dev@lists.freedesktop.org \
--cc=jordan.l.justen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.