[PATCH v2] arm64: dts: marvell: 8040-mcbin: Enable 1GB Ethernet

[gregory.clement@free-electrons.com (Gregory CLEMENT)]

Hi Marc,
 
 On jeu., juin 08 2017, Marc Zyngier <marc.zyngier@arm.com> wrote:

> Enable the 1GB Ethernet interface that lives on the slave CP110,
> with its corresponding phy (that oddly lives on the master CP110).
>
> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>

Applied on mvebu/dt64

Thanks,

Gregory

> ---
> * From v1: 
>   - renamed phy0 -> ge_phy (rmk)
>   - Added lane number and connector location (rmk)
>
>  arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> index f7bb0cc03147..e7296b2d0f0f 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> @@ -100,6 +100,12 @@
>  	status = "okay";
>  };
>  
> +&cpm_mdio {
> +	ge_phy: ethernet-phy at 0 {
> +		reg = <0>;
> +	};
> +};
> +
>  &cpm_sata0 {
>  	/* CPM Lane 0 - U29 */
>  	status = "okay";
> @@ -115,6 +121,17 @@
>  	status = "okay";
>  };
>  
> +&cps_ethernet {
> +	status = "okay";
> +};
> +
> +&cps_eth1 {
> +	/* CPS Lane 0 - J5 (Gigabit RJ45) */
> +	status = "okay";
> +	phy = <&ge_phy>;
> +	phy-mode = "sgmii";
> +};
> +
>  &cps_sata0 {
>  	/* CPS Lane 1 - U32 */
>  	/* CPS Lane 3 - U31 */
> -- 
> 2.11.0
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com