[PATCH 1/2] ARM: dts: armada-370-rn104: add pinmuxing for i2c0

[gregory.clement@free-electrons.com (Gregory CLEMENT)]

Hi Uwe,
 
 On jeu., sept. 29 2016, Uwe Kleine-K?nig <uwe@kleine-koenig.org> wrote:

> Up to now a working i2c bus depended on the bootloader to configure the
> pinmuxing. Make it explicit.
>
> As a side effect this change makes i2c work in barebox.
>
> Signed-off-by: Uwe Kleine-K?nig <uwe@kleine-koenig.org>

Applied on mvebu/dt-4.10

Thanks,

Gregory

> ---
>  arch/arm/boot/dts/armada-370-netgear-rn104.dts | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
> index 11565752b9f6..d44a850d879c 100644
> --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
> +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
> @@ -128,6 +128,10 @@
>  			i2c at 11000 {
>  				compatible = "marvell,mv64xxx-i2c";
>  				clock-frequency = <100000>;
> +
> +				pinctrl-0 = <&i2c0_pins>;
> +				pinctrl-names = "default";
> +
>  				status = "okay";
>  
>  				isl12057: isl12057 at 68 {
> -- 
> 2.8.1
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com