Re: [PATCH v10 00/19] Re-introduce h8300 architecture

[Yoshinori Sato <ysato@users.sourceforge.jp>]

At Mon, 4 May 2015 19:27:00 -0700,
Guenter Roeck wrote:
> 
> On Mon, May 04, 2015 at 07:41:43PM +0900, Yoshinori Sato wrote:
> > Hello.
> > I will re-introducing h8300.
> > 
> 
> Hi,
> 
> With "make ARCH=h8300 edosk2674_defconfig; make ARCH=h8300",
> I see the following build error:
> 
> scripts/Makefile.build:44: arch/h8300/boot/dtb/Makefile: No such file or directory
> make[1]: *** No rule to make target 'arch/h8300/boot/dtb/Makefile'.  Stop.
> 
> After fixing this up with
> 
> diff --git a/arch/h8300/Makefile b/arch/h8300/Makefile
> index c2b24c9..f547870 100644
> --- a/arch/h8300/Makefile
> +++ b/arch/h8300/Makefile
> @@ -26,7 +26,7 @@ CROSS_COMPILE := h8300-unknown-linux-
> 
>  core-y += arch/$(ARCH)/kernel/ arch/$(ARCH)/mm/ arch/h8300/boot/dts/
>  ifneq '$(CONFIG_H8300_BUILTIN_DTB)' '""'
> -core-y += arch/h8300/boot/dtb/
> +core-y += arch/h8300/boot/dts/
>  endif
>      
>  libs-y += arch/$(ARCH)/lib/
> 
> I get
> 
> arch/h8300/boot/dts/built-in.o: In function `__dtb_edosk2674_end':
> (.dtb.init.rodata+0x8fb): multiple definition of `__dtb_edosk2674_end'
> arch/h8300/boot/dts/built-in.o:(.dtb.init.rodata+0x8fb): first defined here
> arch/h8300/boot/dts/built-in.o: In function `__dtb_edosk2674_begin':
> (.dtb.init.rodata+0x0): multiple definition of `__dtb_edosk2674_begin'
> arch/h8300/boot/dts/built-in.o:(.dtb.init.rodata+0x0): first defined here
> Makefile:932: recipe for target 'vmlinux' failed
> 
> This is with compiler and binutils built as you had provided earlier.
> 
> ---
> 
> Other configurations fail to build with
> 
> h8300-unknown-linux-ld: cannot find arch/h8300/boot/dts/built-in.o: No such file or directory
> Makefile:932: recipe for target 'vmlinux' failed
> make: *** [vmlinux] Error 1
> 
> ---
> 
> Switching from edosk2674_defconfig to h8300h-sim_defconfig without "make
> mrproper" results in:
> 
> h8300-unknown-linux-ld: h8300s architecture of input file
> `arch/h8300/boot/dts/built-in.o' is incompatible with h8300h output
> 
> ---
> 
> Results are with git://git.sourceforge.jp/gitroot/uclinux-h8/linux.git,
> branch h8300.
> 
> Guenter

Thanks testing.
It looks Makefile and defconfig problem.

I'll fix next release.

-- 
Yoshinori Sato
<ysato@users.sourceforge.jp>