From mboxrd@z Thu Jan  1 00:00:00 1970
From: Kevin Hilman <khilman@ti.com>
Subject: Re: [PATCH v2 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S
Date: Thu, 10 Feb 2011 14:17:13 -0800
Message-ID: <87d3mzh6vq.fsf@ti.com>
References: <1296756161-26092-1-git-send-email-dave.martin@linaro.org>
	<1296756161-26092-6-git-send-email-dave.martin@linaro.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-omap-owner@vger.kernel.org>
Received: from na3sys009aog113.obsmtp.com ([74.125.149.209]:58947 "EHLO
	na3sys009aog113.obsmtp.com" rhost-flags-OK-OK-OK-OK)
	by vger.kernel.org with ESMTP id S1751310Ab1BJWRT (ORCPT
	<rfc822;linux-omap@vger.kernel.org>);
	Thu, 10 Feb 2011 17:17:19 -0500
Received: by pzk28 with SMTP id 28so464864pzk.7
        for <linux-omap@vger.kernel.org>; Thu, 10 Feb 2011 14:17:18 -0800 (PST)
In-Reply-To: <1296756161-26092-6-git-send-email-dave.martin@linaro.org> (Dave
	Martin's message of "Thu, 3 Feb 2011 18:02:41 +0000")
Sender: linux-omap-owner@vger.kernel.org
List-Id: linux-omap@vger.kernel.org
To: Dave Martin <dave.martin@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org, Tony Lindgren <tony@atomide.com>, Santosh Shilimkar <santosh.shilimkar@ti.com>, Jean Pihet <j-pihet@ti.com>, linux-omap@vger.kernel.org, Nicolas Pitre <nicolas.pitre@linaro.org>

Dave Martin <dave.martin@linaro.org> writes:

>  * Use BSYM() to get the correct Thumb branch address
>    for adr <Rd>, <label>
>
>  * Fix an out-of-range ADR when building for ARM
>
>  * Correctly call es3_sdrc_fix as Thumb when copied to SRAM.
>
>  * Remove deprecated/undefined PC-relative stores
>
>  * Add the required ENDPROC() directive for each ENTRY().
>
>  * .align before data words
>
> Signed-off-by: Dave Martin <dave.martin@linaro.org>

I'm attempting to test this series with OMAP PM, but some changes here
don't compile for me.

My toolchain is: gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) 

First, I merged your arm/omap-thumb2+merged branch with my pm branch
from git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git

There were some minor conflicts here, but they looked simple enough and
I just resolved in favor of your branch.

Trying to build with CONFIG_THUMB2_KERNEL=y, I ran into a compile
problem...


> ---
>  arch/arm/mach-omap2/sleep34xx.S |   42 +++++++++++++++++++++++++++++---------
>  1 files changed, 32 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
> index 4032a8e..ef73429 100644
> --- a/arch/arm/mach-omap2/sleep34xx.S
> +++ b/arch/arm/mach-omap2/sleep34xx.S
> @@ -80,8 +80,10 @@
>  /* Function call to get the restore pointer for resume from OFF */
>  ENTRY(get_restore_pointer)
>  	stmfd	sp!, {lr}	@ save registers on stack
> -	adr	r0, restore
> +	adr	r0, BSYM(restore)
>  	ldmfd	sp!, {pc}	@ restore regs and return
> +ENDPROC(get_restore_pointer)
> +	.align
>  ENTRY(get_restore_pointer_sz)
>  	.word	. - get_restore_pointer
>  
> @@ -89,8 +91,10 @@ ENTRY(get_restore_pointer_sz)
>  /* Function call to get the restore pointer for 3630 resume from OFF */
>  ENTRY(get_omap3630_restore_pointer)
>  	stmfd	sp!, {lr}	@ save registers on stack
> -	adr	r0, restore_3630
> +	adr	r0, BSYM(restore_3630)
>  	ldmfd	sp!, {pc}	@ restore regs and return
> +ENDPROC(get_omap3630_restore_pointer)
> +	.align
>  ENTRY(get_omap3630_restore_pointer_sz)
>  	.word	. - get_omap3630_restore_pointer
>  
> @@ -98,8 +102,10 @@ ENTRY(get_omap3630_restore_pointer_sz)
>  /* Function call to get the restore pointer for ES3 to resume from OFF */
>  ENTRY(get_es3_restore_pointer)
>  	stmfd	sp!, {lr}	@ save registers on stack
> -	adr	r0, restore_es3
> +	adr	r0, BSYM(restore_es3)
>  	ldmfd	sp!, {pc}	@ restore regs and return
> +ENDPROC(get_es3_restore_pointer)
> +	.align
>  ENTRY(get_es3_restore_pointer_sz)
>  	.word	. - get_es3_restore_pointer
>  
> @@ -113,8 +119,11 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
>  	stmfd	sp!, {lr}	@ save registers on stack
>  	/* Setup so that we will disable and enable l2 */
>  	mov	r1, #0x1
> -	str	r1, l2dis_3630
> + ARM(	adrl	r2, l2dis_3630	)	@ may be out of range for adr in ARM
> + THUMB(	adr	r2, l2dis_3630	)	@ Thumb has more range, but not adrl
> +	str	r1, [r2]
>  	ldmfd	sp!, {pc}	@ restore regs and return
> +ENDPROC(enable_omap3630_toggle_l2_on_restore)
>  
>  	.text
>  /* Function to call rom code to save secure ram context */
> @@ -139,12 +148,14 @@ ENTRY(save_secure_ram_context)
>  	nop
>  	nop
>  	ldmfd	sp!, {r1-r12, pc}
> +	.align
>  sram_phy_addr_mask:
>  	.word	SRAM_BASE_P
>  high_mask:
>  	.word	0xffff
>  api_params:
>  	.word	0x4, 0x0, 0x0, 0x1, 0x1
> +ENDPROC(save_secure_ram_context)
>  ENTRY(save_secure_ram_context_sz)
>  	.word	. - save_secure_ram_context
>  
> @@ -279,8 +290,7 @@ clean_l2:
>  	 *  - 'might' have to copy address, load and jump to it
>  	 */
>  	ldr	r1, kernel_flush
> -	mov	lr, pc
> -	bx	r1
> +	blx	r1
>  
>  omap3_do_wfi:
>  	ldr	r4, sdrc_power		@ read the SDRC_POWER register
> @@ -346,8 +356,8 @@ restore_es3:
>  	and	r4, r4, #0x3
>  	cmp	r4, #0x0	@ Check if previous power state of CORE is OFF
>  	bne	restore
> -	adr	r0, es3_sdrc_fix
> -	ldr	r1, sram_base
> +	adr	r0, es3_sdrc_fix	@ Not using BSYM clears the Thumb bit.

This fails to compile:

/work/kernel/omap/pm/arch/arm/mach-omap2/sleep34xx.S: Assembler messages:
/work/kernel/omap/pm/arch/arm/mach-omap2/sleep34xx.S:361: Error: invalid immediate for address calculation (value = 0x00000004)

Kevin

> +	ldr	r1, sram_base	@ Must be 8-byte aligned to preserve alignment.
>  	ldr	r2, es3_sdrc_fix_sz
>  	mov	r2, r2, ror #2
>  copy_to_sram:
> @@ -356,6 +366,7 @@ copy_to_sram:
>  	subs	r2, r2, #0x1	@ num_words--
>  	bne	copy_to_sram
>  	ldr	r1, sram_base
> + THUMB(	orr	r1, r1, #BSYM(es3_sdrc_fix) & 1 )
>  	blx	r1
>  	b	restore
>  
> @@ -438,6 +449,7 @@ skipl2dis:
>  #endif
>  	b	logic_l1_restore
>  
> +	.align
>  l2_inv_api_params:
>  	.word	0x1, 0x00
>  l2_inv_gp:
> @@ -607,6 +619,7 @@ usettbr0:
>  
>  /* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
>  	.text
> +	.align	3
>  ENTRY(es3_sdrc_fix)
>  	ldr	r4, sdrc_syscfg		@ get config addr
>  	ldr	r5, [r4]		@ get value
> @@ -634,6 +647,7 @@ ENTRY(es3_sdrc_fix)
>  	str	r5, [r4]		@ kick off refreshes
>  	bx	lr
>  
> +	.align
>  sdrc_syscfg:
>  	.word	SDRC_SYSCONFIG_P
>  sdrc_mr_0:
> @@ -648,6 +662,7 @@ sdrc_emr2_1:
>  	.word	SDRC_EMR2_1_P
>  sdrc_manual_1:
>  	.word	SDRC_MANUAL_1_P
> +ENDPROC(es3_sdrc_fix)
>  ENTRY(es3_sdrc_fix_sz)
>  	.word	. - es3_sdrc_fix
>  
> @@ -682,6 +697,10 @@ wait_sdrc_ready:
>  	bic	r5, r5, #0x40
>  	str	r5, [r4]
>  
> +@ PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
> +@ base instead.
> +@ Be careful not to clobber r7 when maintaing this code.
> +
>  is_dll_in_lock_mode:
>  	/* Is dll in lock mode? */
>  	ldr	r4, sdrc_dlla_ctrl
> @@ -689,10 +708,11 @@ is_dll_in_lock_mode:
>  	tst	r5, #0x4
>  	bxne	lr			@ Return if locked
>  	/* wait till dll locks */
> +	adr	r7, kick_counter
>  wait_dll_lock_timed:
>  	ldr	r4, wait_dll_lock_counter
>  	add	r4, r4, #1
> -	str	r4, wait_dll_lock_counter
> +	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
>  	ldr	r4, sdrc_dlla_status
>  	/* Wait 20uS for lock */
>  	mov	r6, #8
> @@ -718,9 +738,10 @@ kick_dll:
>  	dsb
>  	ldr	r4, kick_counter
>  	add	r4, r4, #1
> -	str	r4, kick_counter
> +	str	r4, [r7]		@ kick_counter
>  	b	wait_dll_lock_timed
>  
> +	.align
>  cm_idlest1_core:
>  	.word	CM_IDLEST1_CORE_V
>  cm_idlest_ckgen:
> @@ -763,6 +784,7 @@ kick_counter:
>  	.word	0
>  wait_dll_lock_counter:
>  	.word	0
> +ENDPROC(omap34xx_cpu_suspend)
>  
>  ENTRY(omap34xx_cpu_suspend_sz)
>  	.word	. - omap34xx_cpu_suspend

From mboxrd@z Thu Jan  1 00:00:00 1970
From: khilman@ti.com (Kevin Hilman)
Date: Thu, 10 Feb 2011 14:17:13 -0800
Subject: [PATCH v2 5/5] ARM: omap3: Thumb-2 compatibility for sleep34xx.S
In-Reply-To: <1296756161-26092-6-git-send-email-dave.martin@linaro.org> (Dave
	Martin's message of "Thu, 3 Feb 2011 18:02:41 +0000")
References: <1296756161-26092-1-git-send-email-dave.martin@linaro.org>
	<1296756161-26092-6-git-send-email-dave.martin@linaro.org>
Message-ID: <87d3mzh6vq.fsf@ti.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Dave Martin <dave.martin@linaro.org> writes:

>  * Use BSYM() to get the correct Thumb branch address
>    for adr <Rd>, <label>
>
>  * Fix an out-of-range ADR when building for ARM
>
>  * Correctly call es3_sdrc_fix as Thumb when copied to SRAM.
>
>  * Remove deprecated/undefined PC-relative stores
>
>  * Add the required ENDPROC() directive for each ENTRY().
>
>  * .align before data words
>
> Signed-off-by: Dave Martin <dave.martin@linaro.org>

I'm attempting to test this series with OMAP PM, but some changes here
don't compile for me.

My toolchain is: gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) 

First, I merged your arm/omap-thumb2+merged branch with my pm branch
from git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm.git

There were some minor conflicts here, but they looked simple enough and
I just resolved in favor of your branch.

Trying to build with CONFIG_THUMB2_KERNEL=y, I ran into a compile
problem...


> ---
>  arch/arm/mach-omap2/sleep34xx.S |   42 +++++++++++++++++++++++++++++---------
>  1 files changed, 32 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
> index 4032a8e..ef73429 100644
> --- a/arch/arm/mach-omap2/sleep34xx.S
> +++ b/arch/arm/mach-omap2/sleep34xx.S
> @@ -80,8 +80,10 @@
>  /* Function call to get the restore pointer for resume from OFF */
>  ENTRY(get_restore_pointer)
>  	stmfd	sp!, {lr}	@ save registers on stack
> -	adr	r0, restore
> +	adr	r0, BSYM(restore)
>  	ldmfd	sp!, {pc}	@ restore regs and return
> +ENDPROC(get_restore_pointer)
> +	.align
>  ENTRY(get_restore_pointer_sz)
>  	.word	. - get_restore_pointer
>  
> @@ -89,8 +91,10 @@ ENTRY(get_restore_pointer_sz)
>  /* Function call to get the restore pointer for 3630 resume from OFF */
>  ENTRY(get_omap3630_restore_pointer)
>  	stmfd	sp!, {lr}	@ save registers on stack
> -	adr	r0, restore_3630
> +	adr	r0, BSYM(restore_3630)
>  	ldmfd	sp!, {pc}	@ restore regs and return
> +ENDPROC(get_omap3630_restore_pointer)
> +	.align
>  ENTRY(get_omap3630_restore_pointer_sz)
>  	.word	. - get_omap3630_restore_pointer
>  
> @@ -98,8 +102,10 @@ ENTRY(get_omap3630_restore_pointer_sz)
>  /* Function call to get the restore pointer for ES3 to resume from OFF */
>  ENTRY(get_es3_restore_pointer)
>  	stmfd	sp!, {lr}	@ save registers on stack
> -	adr	r0, restore_es3
> +	adr	r0, BSYM(restore_es3)
>  	ldmfd	sp!, {pc}	@ restore regs and return
> +ENDPROC(get_es3_restore_pointer)
> +	.align
>  ENTRY(get_es3_restore_pointer_sz)
>  	.word	. - get_es3_restore_pointer
>  
> @@ -113,8 +119,11 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
>  	stmfd	sp!, {lr}	@ save registers on stack
>  	/* Setup so that we will disable and enable l2 */
>  	mov	r1, #0x1
> -	str	r1, l2dis_3630
> + ARM(	adrl	r2, l2dis_3630	)	@ may be out of range for adr in ARM
> + THUMB(	adr	r2, l2dis_3630	)	@ Thumb has more range, but not adrl
> +	str	r1, [r2]
>  	ldmfd	sp!, {pc}	@ restore regs and return
> +ENDPROC(enable_omap3630_toggle_l2_on_restore)
>  
>  	.text
>  /* Function to call rom code to save secure ram context */
> @@ -139,12 +148,14 @@ ENTRY(save_secure_ram_context)
>  	nop
>  	nop
>  	ldmfd	sp!, {r1-r12, pc}
> +	.align
>  sram_phy_addr_mask:
>  	.word	SRAM_BASE_P
>  high_mask:
>  	.word	0xffff
>  api_params:
>  	.word	0x4, 0x0, 0x0, 0x1, 0x1
> +ENDPROC(save_secure_ram_context)
>  ENTRY(save_secure_ram_context_sz)
>  	.word	. - save_secure_ram_context
>  
> @@ -279,8 +290,7 @@ clean_l2:
>  	 *  - 'might' have to copy address, load and jump to it
>  	 */
>  	ldr	r1, kernel_flush
> -	mov	lr, pc
> -	bx	r1
> +	blx	r1
>  
>  omap3_do_wfi:
>  	ldr	r4, sdrc_power		@ read the SDRC_POWER register
> @@ -346,8 +356,8 @@ restore_es3:
>  	and	r4, r4, #0x3
>  	cmp	r4, #0x0	@ Check if previous power state of CORE is OFF
>  	bne	restore
> -	adr	r0, es3_sdrc_fix
> -	ldr	r1, sram_base
> +	adr	r0, es3_sdrc_fix	@ Not using BSYM clears the Thumb bit.

This fails to compile:

/work/kernel/omap/pm/arch/arm/mach-omap2/sleep34xx.S: Assembler messages:
/work/kernel/omap/pm/arch/arm/mach-omap2/sleep34xx.S:361: Error: invalid immediate for address calculation (value = 0x00000004)

Kevin

> +	ldr	r1, sram_base	@ Must be 8-byte aligned to preserve alignment.
>  	ldr	r2, es3_sdrc_fix_sz
>  	mov	r2, r2, ror #2
>  copy_to_sram:
> @@ -356,6 +366,7 @@ copy_to_sram:
>  	subs	r2, r2, #0x1	@ num_words--
>  	bne	copy_to_sram
>  	ldr	r1, sram_base
> + THUMB(	orr	r1, r1, #BSYM(es3_sdrc_fix) & 1 )
>  	blx	r1
>  	b	restore
>  
> @@ -438,6 +449,7 @@ skipl2dis:
>  #endif
>  	b	logic_l1_restore
>  
> +	.align
>  l2_inv_api_params:
>  	.word	0x1, 0x00
>  l2_inv_gp:
> @@ -607,6 +619,7 @@ usettbr0:
>  
>  /* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
>  	.text
> +	.align	3
>  ENTRY(es3_sdrc_fix)
>  	ldr	r4, sdrc_syscfg		@ get config addr
>  	ldr	r5, [r4]		@ get value
> @@ -634,6 +647,7 @@ ENTRY(es3_sdrc_fix)
>  	str	r5, [r4]		@ kick off refreshes
>  	bx	lr
>  
> +	.align
>  sdrc_syscfg:
>  	.word	SDRC_SYSCONFIG_P
>  sdrc_mr_0:
> @@ -648,6 +662,7 @@ sdrc_emr2_1:
>  	.word	SDRC_EMR2_1_P
>  sdrc_manual_1:
>  	.word	SDRC_MANUAL_1_P
> +ENDPROC(es3_sdrc_fix)
>  ENTRY(es3_sdrc_fix_sz)
>  	.word	. - es3_sdrc_fix
>  
> @@ -682,6 +697,10 @@ wait_sdrc_ready:
>  	bic	r5, r5, #0x40
>  	str	r5, [r4]
>  
> +@ PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
> +@ base instead.
> +@ Be careful not to clobber r7 when maintaing this code.
> +
>  is_dll_in_lock_mode:
>  	/* Is dll in lock mode? */
>  	ldr	r4, sdrc_dlla_ctrl
> @@ -689,10 +708,11 @@ is_dll_in_lock_mode:
>  	tst	r5, #0x4
>  	bxne	lr			@ Return if locked
>  	/* wait till dll locks */
> +	adr	r7, kick_counter
>  wait_dll_lock_timed:
>  	ldr	r4, wait_dll_lock_counter
>  	add	r4, r4, #1
> -	str	r4, wait_dll_lock_counter
> +	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
>  	ldr	r4, sdrc_dlla_status
>  	/* Wait 20uS for lock */
>  	mov	r6, #8
> @@ -718,9 +738,10 @@ kick_dll:
>  	dsb
>  	ldr	r4, kick_counter
>  	add	r4, r4, #1
> -	str	r4, kick_counter
> +	str	r4, [r7]		@ kick_counter
>  	b	wait_dll_lock_timed
>  
> +	.align
>  cm_idlest1_core:
>  	.word	CM_IDLEST1_CORE_V
>  cm_idlest_ckgen:
> @@ -763,6 +784,7 @@ kick_counter:
>  	.word	0
>  wait_dll_lock_counter:
>  	.word	0
> +ENDPROC(omap34xx_cpu_suspend)
>  
>  ENTRY(omap34xx_cpu_suspend_sz)
>  	.word	. - omap34xx_cpu_suspend